Farmall & IHC Tractors Discussion Board |
Blown bypass screen ON my 756--HYD
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by lenray on December 29, 2002 at 15:04:15 from (208.153.180.60):
I bought this tractor used and put about 10 hours per year on it. I have been posting about the TA not working for the past few days and most think my trouble is in the MCV as it will not work in direct drive but works in the rear position -lever pulled back. As many have suggested I pulled the filter out and drained the oil--the metal screen was blown off the BYPASS VALVE filter had plugged then the metal lbypass filter plugged next the screen came off. I probably have all kinds of dirt in the MCV and where ever it can collect. Is there a screen on the MCV that I could check out??? Thanks for all of the help I have been receiving. I should have checked this out the day I bought the tractor not a few years later. len
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|