Farmall & IHC Tractors Discussion Board |
Guide Light Tips....Anybody Familiar?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mikey.ID on August 27, 2002 at 21:14:03 from (204.94.232.126):
Gents, I picked up a pair of 5 inch combo Guide Lights for a real good price. Only problem is, I need to re-paint the red on the inside of the lens. Switches work just fine, wiring in good shape, but the previous owner had sandblasted (lightly) the inside back of the 5 inch bulbs. Do I need to polish out the little window so the lights will show red? Do I need to polish the whole bulb? Do I paint the whole back or should I mask off the little window? Is there a correct paint to use for this? Why am I here? (LOL!). Sorry about all the questions, but I'm from over at the Ford N board and Guide lights didn't exactly come stock on a '41 9N. Cops told me I need red lights on the rear along with my work lights, and I don't want to look like a christmas tree going down the road! Thanks for your help! Mikey
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|