Farmall & IHC Tractors Discussion Board |
Re: Fixing my tire... Any suggestions.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Nat 2 on May 21, 2007 at 11:51:09 from (64.80.110.50):
In Reply to: Fixing my tire... Any suggestions. posted by JayWalt on May 21, 2007 at 07:31:49:
Tractor rears are easiest to deal with with the rim mounted on the tractor. 1. Drain the fluid. Lower the tractor down to squeeze the fluid out of the tube faster. 2. Break the bead. Having the rim mounted on the tractor, you now have something solid to whale against with the BFH. 3. Remove the tire using tire irons, or "spoons" depending on who you talk to. Outside bead first, then pull the tube, then pry the tire the rest of the way off. 4. If the area around the valve stem hole is too far gone, you need a new rim. Get one locally. There HAS to be a tire shop in the area that does tractor tires, that can get you a rim. Just tell them that you need one for a Farmall H and they will know. If they don't, find a different place. I believe it's a "drop center" type, but not sure of the width. FYI, a "double bevel" rim has two bevels.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|