Farmall & IHC Tractors Discussion Board |
Re: 450 engine miss
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on May 14, 2007 at 12:06:50 from (75.19.126.88):
In Reply to: 450 engine miss posted by chester5731 on May 14, 2007 at 09:34:49:
Well myself i would start off with making sure that you have the correct plugs , next chek the gap on all the plugs to make sure that they are a .025 then move on to a set of points and cond. set at .020 then a new cap and rotor and then a new set of Copper core plug wires , next make sure that the dist is working correctly and that the centrifcal advance is working if that is not working then the dist needs to be worked on and that should be left to someone that knows what he is doing and has the equipment to test it . Next would be the timing and here again the dist must be working properly to make sure that it is advancing . Then we would be looking at the intake manifold for leaks and also checking the carb for propper adjustment . THEN It would be on to the valve adjustment. Oh and having a book to go by is a BIG PLUS.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|