Farmall & IHC Tractors Discussion Board |
Re: 300U 12v Conversion Done!!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JayWalt on March 03, 2007 at 05:53:27 from (70.226.7.125):
In Reply to: Re: 300U 12v Conversion Done!! posted by Armand Tatro on March 03, 2007 at 04:55:17:
well, heres the thing. Nobody makes an inline 50amp fuse holder. I'd have to go with a mounted fixture for that, and it first wasnt in the budget, and second there is not much room. The fusible link is only 2.79. It also just fuses the main alternator output to the battery for charging. If my system is pulling more then 55amps, something is probably wrong besides the fusible link. Ideally I would have likes to use a fuse, but that is also one more bad connection to have problems with. Cars have used them for YEARS!! mind you they are usually in spots that arent easily accessible. To each his own I guess. Simplest and Cheapest route led to this =)
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|