Farmall & IHC Tractors Discussion Board |
Second opinion Doc...
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by GaScott on November 14, 2001 at 16:40:41 from (63.80.121.60):
Well, I'm 7 months into the "part-time" restore / rebuild of my Super A. The head's been re-ground and looks good, but there was a bit of a knock when turning the hand crank. Dropped the pan and removed the pistons, appears that someone placed a copper "schim" between the bushing and the journey of piston number 4. The journey has been reduced enough to produce a slight but noticable knock. My resident "ole' timer" farmer friend suggest I have a machine shop "braize" (or something) metal onto journey # 4 and then polish it etc to original size and state, that this places my $200 right into the "soul" of the tractor. My resident (new) farmall restoration "expert" suggest I have the journey ground down to ensure roundness and get an oversized bushing. O.K. experts, let me have it... Thanks, Scott
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|