Farmall & IHC Tractors Discussion Board |
C Oil Filter Troubles-Help Please
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave K on October 09, 2001 at 17:34:03 from (204.180.61.83):
While changing the oil and filter on my C, the new filter came with a gasket and there did not seem to be any gasket under the metal shell when I took it off. I installed the gasket and it leaked, I took the gasket out and it leaked, I tightened the retaining screw just that last little bit and it broke. Two questions: 1. Where can I get a replacement bolt. I am sure I am not the first person to be this dense. 2. What about the gasket? The groove on the base seems to be "v" shaped as though to contact both sides of the can. The gasket was square in profile. Is there a gasket here? I presume I can get the broken screw out easily since it has a hole down the center. Any advice on this is also appreciated. Thanks in advance- Dave
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|