Farmall & IHC Tractors Discussion Board |
Strange Wheel Size on 504
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Chuck on September 17, 2001 at 18:05:15 from (199.165.217.125):
I bought a Farmall 504 at an auction sale and I thought it looked a little squatty, so upon further examination I discovered it has 36" wheels instead of the 38" that the books says is standard for that tractor. The auctioneer said the tractor had been in a fire years ago, so it could be the shop simply put on whatever they had on hand. Now the axle size is 2.75" with a single keyway, which is the same size as the 400, 450, etc. I took the IH part number off of the wheel and had the parts folks at Case IH look for it, but they said it was no longer a valid part number and therefore could not locate what it was (even though we know it is a wheel.) Does anyone out there know what IHC tractor might have used a 36" wheel, with a 2.75" axle? (The H has a 2.5" axle.) Thanks for your help.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|