Farmall & IHC Tractors Discussion Board |
Hyd. on an M
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tom W. on August 14, 2001 at 18:34:53 from (63.49.113.170):
We just got a 49 M with a front end loader and I need some help to figure out how a hyd. valve was hooked up. The tractor only has a belly pump and the front end loader works well by activating the standard belly pump rod. However the tractor has an extra hyd valve and rod that is not hooked up. It looks like the valve that is used with the char lynn systems. It has 2 hyd lines coming out of the center that go to the rear of the tractor. These lines have a coupler on them to hook an impliment. On the inside of the valve there is a hyd hose about 2 feet long with a 1/2 inch nipple and cap on the end. The bottom of the valve is a peice of 1 inch pipe about 6 inches long. neither the short hyd. hose or the 1 inch pipe are hooked to anything. I know the valve is for a rear hook up but how do I make it work? The Belly pump fill has a regular cap on it. Whats missing? Did someone have a live pump on this tractor at some time? Thanks guys
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|