Farmall & IHC Tractors Discussion Board |
Wheel bearings Farmall 200 - the sequel
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RayP(MI) on July 19, 2001 at 13:53:54 from (216.46.196.169):
From my earlier post, of Sunday, which has dropped off the board already, was able to get front wheel bearing from NAPA. Cross referenced off the numbers on existing bearing (thanks to whoever it was who suggested that.) They were a on the shelf item. Grease seal was another matter. They were able to find the part number, 15660, but not on the shelf or in the warehouse. They located a pair in Ohio, and had them shipped - ended paying a shipping charge too. Seals are a completely different design - narrower and triple lip instead of single lip. We'll see how well they work. Really should have installed a second felt washer between the seal and the back of spindle, but wasn't able to get one from NAPA.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|