Farmall & IHC Tractors Discussion Board |
Any way to reference a serial# by the block #?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Pete on July 01, 2001 at 18:23:47 from (66.24.154.121):
Dad's Super C had been smoking a little, when it started fouling plugs we figured it was time so in we went...head for a valve job, pistons out, (seems the only real problem was a stuck oil ring on #1, but here is the real question...when looking through the Quality Farm & Garden catalog at overbore kits, it said you need your block casting #, ours is 354898R1. and according to their parts book is a straight C block. The serial # plate has been missing for over 20 years, so we don't really know... it has quick hitch, touch control hydraulics, disc brakes, 3and1/8 bore in the sleeves, and the grille is 18 and 1/2" tall, and it has out pulled many a Super C and Straight H's, so we have always assumed it was a Super C. Is it possible that QF&G has misinformation? Are we assuming something that is false. or is there no wat to tell? Any help would be appreciated. Pete
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|