Posted by 1,3,4,2 on April 15, 1998 at 10:40:50:
In Reply to: Re: Tune up mistake posted by TuBit on April 15, 1998 at 08:52:03:
:
: : I did a little shade tree tune up and now my 12 volt converted 9N gets no fire to the plugs. I used a Tisco #309786 tune up kit (plugs, points, condenser, rotor, gaskets) and also replaced the cap and plug wires.
: : Expecting the grey beauty to fire right up, imagine my disappointment. Don't know what I did wrong but have a few questions in thet direction.
: : 1. If the condenser is for 6 volt (is that possible) would that result in no fire.
: : 2. What is the firing order? I marked the wires but may have screwed up. My 14 month old son was "helping" me and my wife was offering advice as well. I have it wired 1234 front to back.
: : Any suggestions would be very helpful.
: Check your firing order: 1-2-3-4 does not sound logical, I'll bet it should be 1-2-4-3.
firing order is 1-3-4-2