Posted by ROB on April 03, 1998 at 16:35:54:
In Reply to: Massey Ferguson 35 Schematic/manual posted by Mark Holt on April 02, 1998 at 00:21:46:
Mark,
The only differnce between the two is the shape of the hood. and only some
of the time. The later Ferguson-40 and Massey Harris-50 are the same. and
they have the same gearbox and back as the 35's. the only difference is the
stearing and engines.The schematics for this series of tractors is very
simple. I haven't seen a schematic. I always refer to the schematic of my
Ford 8N. It seems to be the same. What are you looking for? The only
difference is usually the resister values for the coil and voltage
regulator. If you buy replacment parts they match the old components. so
one doesn't really need to know the values. If you do, I can measure mine
and let you know. I have a Ferguson TO-20, TEA-20, TO-30, Ferguson-35,
Massey Harris 50, Ford 9N, 8N so I can get several values.
I have the I&T manual for the F35 and up to MF204 and there is no
schematic. I'll surf around to a few sites and see what I can find. (now
I'm curious!)
tried to email you back but address is unknown.
Have a good one,
Rob