[ View Follow Ups ] [ href="#postfp">Post e sleeves were professionally installed by a reputable machine shop. He didn't have the head planed. I g d when I said the ca d gaskets to keep the pistons from hitting the head.
: This 8n should have adjustable tappets. remov e of the side covers le. You need a special wrench to hold the lifter while you adjust the bolt.
: I am at a loss as to w caps you are refering to on the tappets since the tappet (if non adjustable) or the screw head (on adjustable tappets) opera directly on the valv than fixing the problem now.: : My father-in-law has an 8N that he rebuilt the engine on. It runs gre ut it has a very lou l mixed up. He did install new valve guides. Could a valve guide be jumping up and down or is the tappet arance just really m any help. Mike
Follow Ups: