Posted by Bryan on February 15, 1998 at 14:59:56:
When my lift control lever is raised from the full down position the lift arms will follow with respect to how much I move the lever. But when I pass the half way piont the lift arms continue raising by themselves all the way up. Then when I lower the control lever slightly below the half way piont the lift arms will drop quickly to the proper location (about half way) and then be controlled normally the rest of the way down. Also if I lift a heavy box blade the control lever will creep down lowering the blade asthough the pump is moving the lever. Are these simple adjustments or does it need to be rebuilt?
Any help would be appreciated.