Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

Ford NAA (Golden Jubilee) Parts
Master Parts List
[Show Pictures]
 
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5 8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1 2 inches x 9-1 2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: 182644)$367.64

 
Brakes
Brake Adjusting Hole Cover - This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Part No: 125733)$9.66

Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 105506)$96.00

Brake Backing Plate Felt Seal - For tractor models 8N, NAA, Jubilee. This part repairs 1 wheel, 2 required per tractor. (Part No: 185160)$5.49

Brake Camshaft Hole Cover Spring - This brake camshaft hole cover spring is for tractor models 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948 to 1964). (Part No: 178191)$2.75

Brake Cross Shaft Bushing - Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side}. Sold each. For tractors: 9N, 2N, EARLY 8N {1939-1949}. Fits some later Ford models, verify measurements to ensure fit. (Part No: 178169)$4.95

Brake Cross Shaft Bushing - Measures the same as 782477 except only 1 2 inch long. Presses into transmission housing. For tractors: LATE 8N, NAA, Jubilee {1949-1954}. (Part No: 178170)$5.95

Brake Drum - For tractor models 8N, NAA, Jubilee. Additional $10.00 shipping due to weight. This additional charge will be added to your order. (Part No: 105652)$88.20

Brake Drum Repair Kit - For tractor models 8N, NAA Jubilee. Replaces: 8N2027B Contains: anchor (2), H2041 adjuster screw, 8N2217 felt backing plate seal, 8N2048 adjuster socket, 8N2223 adjuster nut, 8N2049 adjuster spring, 8N2297B return spring, (8N2299 secondary spring. This spring is used on the left side only). Brake Hardware Kit for 1 wheel. 2 used per tractor. (Part No: 105514)$28.50

Brake Drum Retaining Screw Set -
  • For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 981< li>
  • Replaces Ford OEM number 24667S, 24667S8< li>
  • Set of 4< li>
  • Order two sets per tractor< li>
  • 3 8" -16 x 3 4"< li>
  • For Individual Screw use Item #: 125738< li> < UL> (Part No: 185398)
$2.00

Brake Drum Screw - Single drum screw of 3 8 inch-16 x 3 4 inch screws. Order quantity of 4 for complete kit. Used on 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 981. Order 2 sets per tractors. (Part No: 125738)$1.36

Brake Shoe Return Spring, RH Brake - This RH brake shoe return spring is for tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Part No: 178084)$12.30

Brake Shoes, Set of 4 - Complete set of 4. For 8N, NAA, Jubilee. (Part No: 105486)$57.29

Parking Brake Lever - For tractor models NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957. (Part No: 126597)$22.50

 
Clutch
Clutch Alignment Tool - 1-3 8 inch 10 spline, .67 inch pilot. This clutch alignment tool is for tractor models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 119892)$8.06

Clutch Disc - Clutch disc measuring 9 inches with a 1 3 8 inch hub and 10 splines. This is a 6 spring clutch. Fits tractor models 8N, 9N, 2N, NAA (4 speed), NAB, 600, 700, 800, 900 (to serial number 14257), 1800, 2130. Improved from original by added springs. Also replaces 84365150, 91A7550, NAA7550A. (Part No: 111601)$26.26

Clutch Disc - This 10 inch clutch disc fits tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial number 14257). 10 Spline x 1 3 8 inch hub. This is a retrofit for 9 inch clutch, must use 10 inch pressure plate and flywheel. (Part No: 113378)$71.00

Clutch Disc 10 Inch - Clutch Disc, 10 inch Organic, 10 spline on 1.375 inch hub, Spring Loaded. For 1801, 1821, 1841, 2130, NAA, Jubilee, NAA, NAB, 2110, 2120, 2131, 4120, 4121, 4130, 4131, 4140, 541, 601, 620, 621, 630, 631 (Part No: 113378)$71.00

Clutch Fork To Cross Shaft Pin - This Clutch Fork to cross shaft pin is 5 16 inch X 1 1 2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Part No: 178203)$2.56

Clutch Kit, 9 Inch, Single Clutch - This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Part No: 121833)$125.00

Clutch Pedal Arm Bushing - For tractor models: 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002 inch inside diameter x 1-1 2 inches long. Minimum Order Qty is 2. (Part No: 178122)$5.95

Clutch Release Arm Kit - This clutch release arm kit is for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm kit contains: eyebolt part number 355584S8, pin part number 8N7533 and clutch release arm part number 8N7511B. (Part No: 182518)$65.00

Clutch Release Shaft Fork - This Clutch Release Shaft Fork is used on Ford Tractors 1939 - 1954. Replaces original part number 487515, 48-7515. For models 9N, 2N, 8N, NAA and Jubilee. NOTE: Due to variances in OEM. this part may require the bored holes to be honed slightly to fit. There was variation throughout production with Ford. (Part No: 184395)$28.26

Clutch Shaft Bushing - This clutch shaft bearing has a 7 8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Part No: 178029)$6.86

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: 107933)$3.10

Pressure Plate - This 9 inch single pressure plate, flat flywheel type is for tractor models 1800, 2130, 8N, 9N, 2N, NAA, NAB, 600, 700, 800, 900 with a single clutch. (Part No: 172898)$90.96

Pressure Plate -
  • For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000< li>
  • Compatible with Ford Construction & industrial models 2030< li>
  • Replaces Ford OEM number 957E7502B< li>
  • Pressure Plate Size: 9"< li>
  • Pressure Plate Type: Dual Stage< li>
  • For a Remanufactured version of this sku use Item #: 204476< li> < UL> (Part No: 135034)
$500.00

Pressure Plate, 10 Inch, Single Clutch - This new 10 inch single clutch pressure plate is for tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Part No: 172999)$128.22

Pressure Plate Assembly, Remanufactured, 09A7563, 8N7563 -
  • For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 660, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 900, 901, 941, 950, 951< li>
  • Replaces Ford OEM number 09A7563, 8N7563< li>
  • Pressure Plate Size: 9"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 6< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 205807)
$78.01

Pressure Plate, Remanufactured, 957E7502B -
  • For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000< li>
  • Compatible with Ford Construction & industrial models 2030< li>
  • Replaces Ford OEM number 957E7502B< li>
  • Pressure Plate Size: 9"< li>
  • Pressure Plate Type: Dual Stage< li>
  • For a New version of this sku use Item #: 135034< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 204476)
$383.30

Pressure Plate, Remanufactured, NDA7563A -
  • For Ford tractor models NAA, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 2030< li>
  • Replaces Ford OEM number NDA7563A, 86640482< li>
  • Pressure Plate Size: 10"< li>
  • Pressure Plate Levers: 3< li>
  • Pressure Plate Springs: 9< li>
  • Pressure Plate Type: Single Stage< li> < UL> (Part No: 204582)
$95.01

Release Bearing - This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .7969 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Part No: 107007)$17.76

Release Bearing Hub - This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Part No: 163512)$39.70

Release Bearing Spring - This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Part No: 121564)$6.85

 
Cooling System
Fan Belt - Belt is 41 3 8 inches long. For tractor models: 8N late (with Side Mount Distributor), NAA 1952-1954, Jubilee. This belt also works with alternator conversion kit part number 8NL10300ALT. (Part No: 172500)$10.70

Fan Blade - 4 Blade - For tractor models 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125 inch centers. Diameter is 15.75 inch. (Part No: 100768)$42.50

Fan Blade, 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 155372)$121.00

Fan Shroud - For tractor models 501, 541, 600, 601, 611, 621, 700, 800, 900, NAA, (2000, 2110, 2120, 4000, 4110 All before 1964), 2111, 4120, 4121. (Part No: 109990)$65.95

Fan Shroud - This fan shroud is for tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. This fan shroud is metal, and is made to fit original radiators. It must be slightly trimmed to fit aftermarket radiators lower pipe. (Part No: 109990)$65.95

Fan Shroud Hardware Kit - This fan shroud hardware kit is used for mounting original Fan Shrouds on Ford Tractors, 1939-1964. The kit includes 7 screws and 7 washers. Some models listed use less than 7. (Part No: 178200)$3.49

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3 8 inches (11cm) length, 2-1 2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: 178758)$95.00

Radiator - This radiator has 3 rows of tubes, stamped steel inlets and outlets, and it does not come with a cap. This radiator fits tractor models: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964 4 cylinder tractors, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Core measurements Height: 17 inches. Width: 15-1 4 inches. (Part No: 101693)$195.00

Radiator - This is a restoration quality version of the radiator used on Ford 4 cylinder tractors, 1953-1964: Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140. Used on tractors without oil cooler in lower tank. Features a cast lower pipe, cap, drain tap (not shown) and overflow tube. Replaces C5NN8005AB, NCA8005B, NCA8005C, NCA8005D NAA-8005-B, NAA8005B. (Part No: 135045)$305.00

Radiator Cap - This radiator cap is a low pressure 4 psi cap. This radiator cap is for tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4 cylinder gas and diesel (1953 to 1964) except Majors. (Part No: 108081)$8.96

Radiator Hose Clamp - This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3 4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Part No: 178164)$3.50

Radiator Hose, Lower - This Lower Radiator Hose is used on Ford 4 Cylinder tractors 1954-1964 with factory or converted to power steering. Replaces 313151 (Part No: 182499)$10.50

Radiator Hose, Upper - This upper radiator hose is for tractor models NAA, Jubilee, 600 series, 700 series, 800 series, 900 series, 2000 4-cylineder, 4000 4 cylinder Series. It can replace 310048. This hose measures 7 3 8 inches long, 1 1 2 inch outside diameter and 1 3 16 inside diameter. (Part No: 108083)$3.50

Radiator Mounting Bolt Kit - These Radiator Mounting Bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 Carriage Bolts, 2 Nuts, 2 Lock Washers and 2 Washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces Nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Part No: 182536)$6.06

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Part No: 109978)$2.00

Thermostat Housing - This thermostat housing is for tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Gasket available as part number EAF8255A, please order separately. (Part No: 160754)$53.00

Water Pump - For NAA, Jubilee. Comes with Rear Cover Plate and Gasket. Replaces Part number CDPN8501B. (Part No: 100555)$44.00

Water Pump Cover Plate Gasket - This pump cover plate gasket is for all 4-cylinders 1953-1964. Price is for each. (Part No: 156680)$2.20

Water Pump Mounting Gasket - Gasket, water pump rear to cylinder block. Tractors: All 4-cyl, 1953-1964. (Part No: 150390)$1.40

Water Pump Pulley, Single Groove - For tractor models NAA, Jubilee. Single Groove Water Pump Pulley. (Part No: 172779)$32.70

Water Pump Sealant - RTV Blue 3.35 oz. tube. (Part No: 178141)$9.36

 
Decals and Emblems
Decal, Fear This Ford - 12-1 2 inches x 3 inches. For all Ford tractors. (Part No: 183476)$16.00

Decal Set, Complete - For tractor models NAA, Jubilee. (Part No: 182512)$33.00

Ford Script Painting Mask - This Ford script painting mask set includes 2 smaller 7-1 4 inch x 1-3 4 inch and 2 large 9 inch x 3 inch Ford script painting masks for tractor models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: 178198)$22.00

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Part No: 178113)$21.76

 
Drive Train
Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. (Part No: 109587)$147.00

Axle Bearing Assembly - For tractor models: 8N, 9N, 2N, NAA, Jubilee. This includes rear axle bearing (2N4221) and cup (9N4222). (Part No: 179813)$45.50

Axle Nut - 1.25 inch, 18 hex. For tractor models (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 178038)$8.50

Axle Nut, Clamp Lock Type - Clamp Lock Nut, rear axle, 1-1 4 inch. For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: 179811)$27.76

Axle Nut Lock Ring - For 8N 1948-1953, Jubilee and NAA. Snap Ring. Priced each. (Part No: 112050)$2.10

Axle Rear Bearing Race - This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Part No: 109579)$9.66

Axle Seal, Inner Seal - This seal measures 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Part No: 106611)$5.86

Axle Seal, Outer - For tractor models 8N serial number 486753 and up, NAA, Jubilee. 3-3 4 inch outside diameter, 2-7 8 inch inside diameter. (Part No: 111316)$6.26

Axle Shaft Gasket - For tractor models 8N, NAA, Jubilee all 1948-1954. Inside diameter 1 15 16 inches, outside diameter 2 3 16 inch. These were originally made of cork and all replacements are made from rubber. These must be replaced when the axle seals are replaced. (Part No: 109583)$2.90

Countershaft - For NAA, Jubilee. Countershaft. (Part No: 126175)$178.50

Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Part No: 179801)$26.00

Differential Pinion Cone, Front - Bearing, Tapered Cone. For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4 1962, NAA, Jubilee 1953-1954. (Part No: 172497)$74.60

Differential Pinion Pilot Bearing - For tractor models 2120 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, 600 with 4 speed transmission serial number <54165 - 1958, with 5 speed serial number <196155 -1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, NAA, Jubilee 1953-1954. (Part No: 172717)$137.00

Gasket, Axle housing to center - Gasket center housing to rear axle housing. For Ford 4 cylinder non-industrial tractors, 1953 - 1964. NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 700, 900, 2000, 2031, 2111, 2120, 2131, 4000, 4031, 4120, 4121, 4131, 4140. 13 Mounting Holes, 15 Inch O.D., 12-15 16 Inch I.D., 0.010 Inch Thick. (Part No: 172802)$2.00

Gasket, Main Drive Gear Bearing Retainer - For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB. (Part No: 172746)$0.69

Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60 28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 165266)$245.70

Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-1964), 8N (1948-1952). 17 teeth. (Part No: 112154)$128.00

Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Part No: 172982)$224.70

Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission - This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set)$193.00

Gear Shift Boot - Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1 2 inches in diameter. (Part No: 184029)$6.95

Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Part No: 155070)$9.99

Gear Shift Pin - This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Part No: 169927)$4.56

Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 109586)$85.00

Input Drive Shaft - This Input Drive Shaft has 10 Splines, 20 Helical Teeth. It is used on 3 and 4 speed transmissions on Ford: 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900. It replaces original part number 2N7017A. (Part No: 179301)$295.00

Main Shaft Connecting Coupling - For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Part No: 172715)$64.10

Oil Seal, Main Drive Gear - This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Part No: 109957)$5.16

Sherman Transmission External Lever - Step Up Step Down Lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900 and 901. (Part No: 182895)$109.00

Shift Cover Plate Gasket - For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Part No: 109958)$3.26

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Part No: 178105)$6.99

Shift Knob - ThisTransmission Gear-Shift Lever Knob has is 3 8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3 8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5 16 UNF thread is needed, order C5NN7213A (Part No: 110012)$4.75

Transmission Bearing Cone - Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 110536)$8.25

Transmission Bearing Cup - Main Drive Shaft and Countershaft Bearing Cup for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 121348)$27.50

Transmission Rebuild Kit - For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: 184559)$188.40

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
12 Volt Conversion Kit - 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness, resistor and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not require a 12 volt coil. Comes with everything needed to convert to a 12 volt starting system except for a battery. (Part No: 103141)$117.00

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 111377)$78.99

Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire "self exciting" alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 111377)$78.99

Alternator Adjustable Arm - Alternator Adjusting Arm. For alternator conversion on the following tractors (1953 to 1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: 172574)$18.10

Alternator Adjuster Bracket -
  • For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910< li>
  • Steel< li>
  • 6mm Thick< li>
  • (1) 10.7mm Unthreaded Hole< li>
  • (1) 8.5mm x 92mm Slot< li>
  • 230mm OAL< li> < UL> (Part No: 164215)
$11.76

Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. All 1953 to 1964. (Part No: 172491)$35.40

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: 178026)$14.00

Alternator Conversion Wiring Harness -
  • For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910< li>
  • Number of Wires: 7< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 164235)
$32.50

Alternator - Delco Style (7127), Remanufactured, Delco Remy, 10459509 -
  • For Ford tractor models NAA, 2N, 8N, 9N < li>
  • Compatible with Massey Ferguson tractor models TO20 (less tachometer)< li>
  • Replaces Delco Remy manufacturer number 10459509< li>
  • Replaces manufacturer number 13-40113, 13-4011SW, 240-204-3, 7127-3SE, 7127-SEC, 240-204C, 90-01-3125, 7127-1W, N7127-1W, RA00103< li>
  • For Universal Applications< li>
  • 1-Wire Hookup< li>
  • Delco Style< li>
  • Voltage: 12< li>
  • Amperage: 63 (Self Exciting)< li>
  • Rotation: Clockwise< li>
  • Regulator: Internal< li>
  • For a New version of this sku use Item #: 111377< li> < UL> (Part No: 204209)
$193.01

Alternator Mounting Bracket -
  • For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910< li>
  • Steel< li>
  • 9.5mm Thick< li>
  • (2) 13mm Unthreaded Holes< li>
  • (2) 10mm Unthreaded Holes< li> < UL> (Part No: 164214)
$14.26

Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5 8 inches wide. The diameter varies from our different suppliers. This measures about 2 5 8 inches outside diameter, give or take about a 1 4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Part No: 172594)$18.76

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7 8 inches wide, 1-1 2 inch offset, 8-1 4 inch from farthest end of slot to center of mounting hole, 3-3 4 inch slot length, 3 8 inch mounting hole. (Part No: 173326)$27.00

Battery Cable - For NAA, Jubilee, 600, 700, 800, 900. All 1953 and up. Cable, 10 inches long. (Part No: 115745)$5.16

Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. Replaces: 81826317, 86H14321A, C0NN14321A, C7NN14321A, S115407 (Part No: 126653)$12.95

Battery Hold Down Bolt - Bolt with nut. For tractor models 8N, NAA (1948-1954). (Part No: 178014)$4.95

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)$35.98

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)$53.81

Cable Clip - This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 5 8 inch air cleaner tube. Used on Ford Tractors, 1953 to 1964. (Part No: 182920)$2.90

Cable, Starter to Switch - Switch to starter cable, 14-1 2 inches long. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Part No: 115783)$5.10

Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 183039)$49.00

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1 2 inches diameter. (Part No: 182583)$28.99

Coil, Ignition 12V - Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Part No: 105282)$16.26

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models. (Part No: 105281)$14.26

Coil - Six Volt - This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Part No: 183737)$39.95

Complete Tune Up Kit -
  • For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all 4 cylidner gas)< li>
  • Replaces Ford OEM number 309787< li>
  • Includes point set, condenser, rotor button, spark plugs, distributor cap and wire set< li> < UL> (Part No: 116748)
$46.00

Condenser - For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Part No: 111198)$2.90

Distributor - With Slotted Drive Shaft. For tractor models NAA, Jubilee. Comes with cap, rotor, dust cover, points, condenser, etc, and ready to drop in. Replaces 86643560, FAC12127D (Part No: 105327)$151.00

Distributor Bushing - This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Part No: 111462)$32.59

Distributor Bushing -
  • For Ford tractor models NAA, 8N (s n 263844-later), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number 7RA12233< li>
  • For 4 cylinder models< li> < UL> (Part No: 111466)
$12.76

Distributor Bushing and Shim Kit - Distributor Bushing and Shim Kit. fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Part No: 178573)$37.26

Distributor Cap, Clip Held - Fits Tractors: 8N serial number 263844 and above (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Part No: 100012)$8.76

Distributor Cap Hold Down Clip - This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Part No: 178205)$3.76

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Part No: 182949)$1.26

Distributor Driven Gear - For tractor models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Part No: FAD12390A)$44.89

Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Part No: 105527)$5.10

Distributor Point Set, 4-Cylinder - For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: 111315)$4.30

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Part No: 183738)$5.80

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Part No: 111464)$6.06

Distributor Rotor Clip - For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Part No: 110785)$4.75

Distributor Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 111317)$2.10

Distributor Screw -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number 350032S< li>
  • For 4 cylinder models< li> < UL> (Part No: 111467)
$11.40

Distributor Seal -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number D8NN12A118AA, FAA12476A< li>
  • For 4 cylinder models < li> < UL> (Part No: 111463)
$14.00

Distributor Washer -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140< li>
  • Replaces Ford OEM number FAA12179A< li> < UL> (Part No: 113483)
$16.50

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 105079)$109.00

Electronic Ignition Conversion Kit, 12V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Part No: 182576)$120.00

Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 182507)$130.54

Electronic Ignition Conversion Kit, 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 105080)$128.00

Generator Brush, 6 Volt, 2 Pack -
  • For Ford tractor models NAA, 501, 600, 601, 621, 641, 651, 661, 671, 681, 700, 701, 800, 801, 861, 900, 901< li>
  • For 6 Volt Generators For Listed Models< li>
  • For Generator Brush, 6 Volt, 4 Pack use Item #: 185288< li> < UL> (Part No: 185289)
$4.36

Generator Brush, 6 Volt, 4 Pack -
  • For Ford tractor models NAA, 501, 600, 601, 621, 641, 651, 661, 671, 681, 700, 701, 800, 801, 861, 900, 901< li>
  • For 6 Volt Generators For Listed Models< li>
  • For Generator Brush, 6 Volt, 2 Pack use Item #: 185289< li> < UL> (Part No: 182467)
$14.76

Generator - Ford Style (5799), Remanufactured, FAC10002A -
  • For Ford tractor models NAA, 501, 541, 640, 641, 651, 660, 681, 701, 740, 841, 850, 851, 860, 881, 901, 960< li>
  • Replaces Ford OEM number FAC10002A, FAC10002C, FAL10000, FAL10000A< li>
  • Replaces manufacturer number 5799, 350-43, 92-02-5012< li>
  • Ford Style < li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Amperage: 35< li>
  • Regulator: External < li>
  • For Voltage Regulator use Item #: 105537< li> < UL> (Part No: 203166)
$360.01

Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 to 1964, 4000 to 1964, 6000 to 1964. (Part No: 182496)$21.29

Ignitor - 4 Cylinder, 12V -
  • For Ford tractor models NAA, 2N, 8N, 9N< li>
  • Replaces Ford OEM number 8301082< li>
  • Models with distributor on the front of the engine< li>
  • Volts: 12< li>
  • Ground: negative< li> < UL> (Part No: 190709)
$103.31

Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3 4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Part No: 105687)$6.86

Main Wiring Harness - This Main Wiring Harness includes headlight wiring. Does not include taillight wiring. This kit is designed for tractors that are not equipped with a fuel gauge. If you have a fuel gauge, please plan on reusing your gauge and sending unit wires. This harness is for gas with 6 volt generator systems and without fuel gauge (1953 - 1957). Replaces FDN14401B (Part No: 184664)$173.00

Spark Plug - Extended tip, 14mm thread, 3 4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: 179436)$3.50

Spark Plug - Extended tip, 14mm thread, 3 8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: 179437)$3.50

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: 182459)$3.16

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Part No: 130072)$2.20

Spark Plug Wire Set, Custom, 4 Cyl. - For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. USA. Plug Wire Lengths: 6 inches, 8 inches, 11-1 4 inches, 17 inches. Coil Wire Length: 11-1 4 inches. (Part No: 155171)$19.50

Starter - Starter, less drive, special Delco option 12 volt, clockwise rotation. DOES NOT LOOK LIKE ORIGINAL. For Jubilee, 2000, 4000, 501, 600, 700, 800, 900, NAA. (Part No: 160406)$122.00

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)$0.00

Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 126652)$7.50

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Part No: 126654)$4.25

Starter Drive - Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: 110819)$22.00

Starter - Ford Style DD with Drive -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 6000< li>
  • Compatible with Ford Construction & industrial models 1800, 1801, 1811, 1821, 1841, 1871, 1881, 4040< li>
  • Replaces Ford OEM number C3NF11002E, C3NF11002CR< li>
  • Rotation: Clockwise< li>
  • Teeth: 9< li>
  • Type: Ford< li>
  • Volts: 12< li>
  • For Starter without Drive use Item #: 112210< li> < UL> (Part No: 173484)
$240.60

Starter - Ford Style DD without Drive (3110) -
  • For Ford tractor models NAA, 501, 541, 601, 611, 621, 631, 640, 641, 651, 660, 661, 671, 681, 701, 740, 741, 771, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 901, 941, 951, 960, 961, 971, 981, 2000, 2031, 2120, 4000 (Diesel), 4030 (Diesel), 4031 (Diesel), 4130 (Diesel), 4131 (Diesel), 4140 (Diesel)< li>
  • Compatible with Ford Engine(s) 134 (4 Cyl), 172 (4 Cyl)< li>
  • Replaces Ford OEM number B5C11002A, C3NF11001A, C3NF11002D, C3NF11002DR, FAC11000, FAC11001, FAC11001B, FAC11001G, FAC11001H, FAC11001M, FAC11001P, FAC11002, FAC11002B, FAC11002G, FAG11002G, FAG11002M< li>
  • Replaces manufacturer number 3110, 150-028, 1728948, 91-02-5787< li>
  • Starter drive gear not included< li>
  • Ford Style Direct Drive without Drive Gear< li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Shaft Length: 5-3 4"< li>
  • Mounting Type: Flange< li>
  • Mounting Holes: 3< li>
  • For a New version of this sku use Item #: 203140< li> < UL> (Part No: 112200)
$95.00

Starter - Ford Style DD without Drive (3115) -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 6000< li>
  • Compatible with Ford Construction & industrial models 1800, 1801, 1811, 1821, 1841, 1871, 1881, 4040< li>
  • Replaces Ford OEM number B6A11002A, C3NF11002E, FAR11001A, FAR11002A, C3NF11002CR< li>
  • Replaces manufacturer number 150-029, 3115, 44-4230, 44-9602, 44-9609, 44-9619, SA-519, SA-519A, SA-622, 91-02-5788< li>
  • Starter drive gear not included< li>
  • Ford Style Direct Drive without Drive Gear< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Shaft Length: 5-3 4"< li>
  • For Solenoid use Item #: 112209< li> < UL> (Part No: 112210)
$102.00

Starter Less Drive - Ford Style DD (3110), Remanufactured, B5C11002A -
  • For Ford tractor models NAA, 501, 541, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 701, 740, 741, 771, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 901, 941, 951, 960, 961, 971, 981, 2000, 2031, 2120, 4000, 4130, 4131, 4140< li>
  • Replaces Ford OEM number B5C11002A, C3NF11001A, C3NF11002D, C3NF11002DR, FAC11000, FAC11001, FAC11001B, FAC11001G, FAC11001H, FAC11001M, FAC11001P, FAC11002, FAC11002B, FAC11002G, FAG11002G, FAG11002M< li>
  • Replaces manufacturer number 3110, 150-028, 1728948, 91-02-5787< li>
  • Ford Style Direct Drive< li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • For a New version of this sku use Item #: 112200< li> < UL> (Part No: 203140)
$257.01

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Part No: 183576)$7.95

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Part No: 150223)$18.75

Starter Solenoid, 6 Volt - This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. Insulated Base, does not ground through mounting bracket. Will work in tractors converted from 6 to 12 volts, using a 4 post solenoid. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Part No: 105690)$17.30

Starter Solenoid Assembly - This 6 or 12 Volt Starter Relay is for NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Flat mount, 3 post. Replaces: NCA11450A, DR1494, U925, U928, SW1, SW219 (Part No: 105677)$21.00

Starter Switch - With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Part No: 105685)$15.00

Starter with Drive - This 3 Bolt Starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 cylinder gas or diesel, 6 or 12 volt systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Part No: 112209)$126.00

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5 8 inch number 32 thread. It is 21 32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Part No: 121141)$12.99

Terminal Block - For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Part No: 165423)$8.50

Tune Kit, Basic - This Basic Ignition Tune Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Part No: 183923)$17.20

Voltage Regulator - Voltage regulator, 12-volt. For tractor models NAA, Jubilee. (Part No: 179262)$65.00

Voltage Regulator, 12 Volt 22A Generator - For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Jubilee. All 1953 to 1964. (Part No: 105538)$31.90

Voltage Regulator, 6 Volt - This 6 volt positive ground Regulator has 3 terminals (armature, field, battery). It is designed for "B" type circuits and has 10 to 12 output amps. For 1953-1964 GAS engine tractors: NAA, 1800, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 105537)$21.00

Wiring Harness - Fits NAA & Jubilee (1953 to 1954). Ignition harness only. (Part No: 105714)$19.76

Wiring Harness, 12 Volt Conversion - For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953 to 1964. (Part No: 164238)$20.50

 
Engine Bearings
Connecting Rod Bearing - .040" Oversize - Journal -
  • For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel)< li>
  • Compatible with Ford Engine(s) 134 (gas), 172 (diesel or gas)< li>
  • Bearing Size: .040" Oversize< li>
  • Sold per journal< li>
  • For Standard connecting rod bearing use Item #: 106265< li> < UL> (Part No: 106266)
$7.76

Connecting Rod Bearing - Standard - Journal -
  • For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel)< li>
  • Compatible with Ford Engine(s) 134 (gas), 172 (diesel or gas)< li>
  • Replaces Ford OEM number 312026, 4P9944< li>
  • Bearing Size: Standard< li>
  • Sold per journal< li>
  • For .010" connecting rod bearing use Item #: 106266< li> < UL> (Part No: 106261)
$16.80

Main Bearings - .010" Oversize - Set -
  • For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000< li>
  • Compatible with Ford Engine(s) 134, 172< li>
  • Replaces Ford OEM number EAF6342F, EAF6331D< li>
  • Bearing Size: .010" Oversize< li>
  • Sold in complete sets< li>
  • For Standard main bearing use Item #: 106272< li> < UL> (Part No: 106269)
$45.26

Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 and 172 4-cylinder Gas or Diesel engines (.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both PRE 1965). (Part No: 182484)$59.10

Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 and 172 4-cylinder Gas or Diesel engines (.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 106270)$45.26

Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 106271)$45.26

Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 106272)$52.00

Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 106267)$43.26

Piston Pin Bushing - For tractor models NAA, Jubilee, (2000 prior to 1964), 500, 600, 601, 700, 701, (4000 gas from 1962-1964), (800, 900 1955-57), (801, 901 gas 1958-1962). Note, these no longer come with oil hole. It needs to be drilled. 4 Used Per Engine. Sold Individually. Replaces EAA6207A (Part No: 108670)$4.40

PTO Cap - Short -
  • For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140, 4190, 4200, 4330, 4340, 4400, 4410< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4040, 4140, 4500< li>
  • Replaces Ford OEM number 310088F< li> < UL> (Part No: 155022)
$8.00

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010 - For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engines, (.010 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 185161)$36.26

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines (.020 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 184403)$36.26

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 184520)$34.33

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For tractor models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: 185597)$33.55

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD - With journals measuring 2.298 inches. For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: 184749)$48.50

 
Engine Gaskets
Camshaft Cover Gasket -
  • For Ford tractor models NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140< li>
  • Replaces Ford OEM number C0NN6A250A< li>
  • Engines: 134, 172 gas diesel< li> < UL> (Part No: 150041)
$2.30

Crankshaft Seal, Front - This Front Crankshaft Seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Part No: 106273)$4.65

Crankshaft Seal Kit, Rear - This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Part No: 182525)$37.00

Crankshaft Seal, Rear Pair - Comes in halves. 2 needed for complete seal. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. (Part No: 106274)$14.76

Front Crankshaft Wear Sleeve - This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Part No: 184669)$45.82

Head Gasket 134/172 Gas - Head Gasket, non-metallic used with 1 2 inch or 7 16 inch head bolt holes. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 2000 up thru 1964, 4000 up thru 1964. (Part No: 155277)$26.26

Head Gasket, 134CID Gas Engines - Head Gasket, metal clad with 7 16 inch or 1 2 inch head bolt holes. For: NAA, Jubilee, 600, 601, 700, 701, 2000, 4000 with 134 gas engines. (Part No: 182485)$29.00

Lower Gasket Set - Used on 134 CID & 172 CID gas or diesel engines. For tractor models NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: 106345)$57.60

Main Bearing Cap Packing Material, V-Style - For 134 and 173 CID Engines, 1953 to 1964. Sold individually. (Part No: 172567)$3.21

Oil Filter Inlet Tube Cover Gasket -
  • For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas)< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881< li>
  • Replaces Ford OEM number B9NN6A628A< li>
  • Oil filter inlet tube cover gasket< li> < UL> (Part No: 160106)
$1.76

Oil Pan Gasket - Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: 106281)$5.00

Oil Pump Inlet Tube Flange Cover Gasket -
  • For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas)< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881< li>
  • Replaces Ford OEM number EAA6626C< li>
  • Inlet tube flange cover gasket< li> < UL> (Part No: 160105)
$1.46

Oil Pump to Block Gasket -
  • For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas)< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881< li>
  • Replaces Ford OEM number EAA6659A< li>
  • Oil pump to block gasket< li> < UL> (Part No: 160104)
$1.50

Overhaul Gasket Set - This Full Overhaul Gasket Set comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed for models NAA, Jubilee, 600, 700 (134 cubic inch engine). All with gas engines and 7 16 inch head bolts from 1953 to 1957. (Part No: 106275)$55.00

Overhaul Gasket Set Less Head Gasket 134/172 Gas - Comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Part No: 182454)$47.50

Push Rod Side Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Part No: 165426)$5.96

Pushrod Side Cover Grommet - Pushrod Side Cover Grommet. Three used per tractor. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A. (Part No: 165425)$4.60

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: 178141)$9.36

Timing Gear Front Cover Gasket - For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. All gas or diesel 1953 to 1964. (Part No: 172791)$3.36

Upper Engine Gasket Set - Metal head gasket for 1 2 inch or 7 16 inch bolt holes. For tractors: NAA, 600, 700; 134 CID engine (1953-1957). (Part No: 185151)$61.00

Upper Gasket Set -
  • For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000 (s n 1964-earlier)< li>
  • Replaces OEM number HGS6008H1< li> < UL> (Part No: 176532)
$38.00

Valve Cover Stud Grommet - This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Replaces: EAF6570A (Part No: 178199)$7.36

Valve Cover Vent Breather Gasket - This Gasket for the Valve Cover Vent Breather measures 2 3 4 inches outside diameter. The gaskets first 134, 172 and 192 gas, LP and diesel 4 cylinder engines from 1953 to 1964. For tractor models: NAA, Jubilee, 1801, 2000, 4000, 501, 600, 601, 700, 701, 800, 900, 901. (Part No: 172956)$1.10

Valve rocker arm cover gasket. - Valve Rocker Arm Cover Gasket. For FORD TRACTORS: NAA, Jubilee, NAB, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 500 SERIES, 600 SERIES, 700 SERIES, 800 SERIES, 900 SERIES. Also fits Ford Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130. (Part No: 128766)$6.00

 
Engine Overhaul Kits
Basic Engine Overhaul Kit, 134 CID Gas, Overbore - Super power 3.5 inch overbore kit. Kit includes sleeve and piston set, pin bushings, rings, retainers, head gasket. Bearings must be ordered separately. For the following tractors using 134 CID 4 cylinder gas engine (1953-1957): NAA, 501, 600, 601, 700, 701, 2000. (Part No: 130775)$300.00

Basic Engine Overhaul Kit, 134 Gas - 134 CID 4 cylinder gas 3-7 16 inch Standard Bore. Contains, sleeves, pistons, rings, pins & retainers, complete gasket kit. Bearings are available, must be ordered separately. The head gasket is this set is metal clad and for 7 16 inch head bolts. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700. (Part No: 186573)$335.01

Cylinder Kit - 3.500" Overbore -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas, 1953-1961)< li>
  • Bore: 3.500"< li>
  • Finished liner< li>
  • Includes: Liner, Piston, Rings, Pin and Retainers< li> < UL> (Part No: 160840)
$75.00

Engine Rebuild Kit with Valve Train - Less Bearings - 1953-1957, 134 -
  • For Ford tractor models NAA (1 53-12 54), 600 (1 55-12 57), 620 (1 55-12 57), 630 (1 55-12 57), 640 (1 55-12 57), 650 (1 55-12 57), 660 (1 55-12 57), 700 (1 55-12 57), 740 (1 55-12 57)< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • 3.500" overbore< li>
  • 3.600" stroke< li>
  • Press fit liners in early engines can be bored up to .040" oversize< li>
  • Models 1953-1957< li>
  • Small chamber cylinder head cast EAE-E, EAE-F, 310098< li>
  • Kit includes: Pistons, Piston Ring Set, Liners, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106271< li> < UL> (Part No: 130802)
$490.00

In-Frame Engine Kit, 134 Gas - For NAA, 600, 700. All with 134 CID 4 cylinder gas engine 1953 to 1957, 3-7 16 inch standard bore. Includes: CPN6055A sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with metal clad head gasket, EAF6710B crankcase oil pan gasket. (Part No: 184482)$365.00

In Frame Overhaul Kit, 134 GAS - For NAA, 600, 700. All with 134 CID 4 cylinder gas engine 1953 to 1957. Includes: Super power set 3 1 2 inch overbore PK110 sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: 184810)$485.00

Valve Service Kit - For servicing one engine with valve related parts when only valve refacing is required. Kit contains: springs, key and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964). (Part No: 178669)$90.00

Valve Train Kit, 134 CID Gas - For servicing one engine when valve replacement is necessary. Kit contains: valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964). (Part No: 108790)$106.90

 
Engine Parts
2nd Mainshaft & Countershaft Gears -
  • For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000< li>
  • Replaces Ford OEM number B9NN7114A, B9NN7A381B< li>
  • 4 Speed Only< li>
  • 2 Piece Set< li> < UL> (Part No: 110911)
$193.00

Camshaft - Has Snap Ring type Timing Gear Nose. For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 all with 4 cylinder GAS engines. Used in 134, 144 and 172 CID gas engines. This camshaft does not fit diesel applications. This fits late style with snap ring groove uses EAF6256M press on cam timing gear. It will replace the early style. (Part No: 160917)$211.80

Camshaft Hydraulic Pump Drive Gear - For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5 16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5 16 inch diameter bolts. NOTE: Early tractors used 1 4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5 16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Part No: 123501)$71.30

Camshaft Kit, Camshaft and Lifters - Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that use a pressed on cam gear. NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Order EAF6256M press on cam gear if needed. (Part No: 184418)$290.00

Camshaft Timing Gear, STD - Standard Cast Iron Press-on Camshaft Timing Gear. Outside diameter of 6.125 inches and 42 teeth. For tractor models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-1964, 4000 <1964, 501, 600, 601, 700, 701, 800, 800 1955-1957, 801 DIESEL 1964, 801 GAS 1958-1962, 900, 900 1955-1957, 901 DIESEL 1964, 901 GAS 1958-1962, NAA, Jubilee. (Part No: 121561)$44.95

Connecting Rod Nut - This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Part No: 183734)$1.50

Connecting Rod Nut -
  • For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000< li>
  • Replaces Ford OEM number FC9AZ6212B, 70207132, C9AZ6212B< li>
  • For OEM Quality use Item #: 183734< li> < UL> (Part No: 182466)
$0.66

Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Part No: 185237)$601.29

Crankshaft Gear - This crankshaft gear has 21 teeth for tractor models NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Part No: 121563)$51.99

Crankshaft, Remanufactured, C0NN6303C, 310372 -
  • For Ford tractor models NAA, 600, 700, 800, 900, 2000, 4000< li>
  • Compatible with Ford Engine(s) 134 (gas), 172 (gas)< li>
  • Replaces Casting number C0NN6303C, 310372, D1NL6303A, EAF6303< li>
  • Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished.< li> < UL> (Part No: 200170)
$465.01

Cylinder Head, Remanufactured, 310098 -
  • For Ford tractor models NAA (600), 600, 700, 2000< li>
  • Replaces Ford Casting number 310098< li>
  • Casting No. 310098< li>
  • Engine 134< li>
  • Cylinders: 4< li>
  • 1 2" head bolts< li>
  • Not a welded head< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205483)
$1100.01

Cylinder Head with Valves, Remanufactured, 310098 -
  • For Ford tractor models NAA (600), 600, 700, 2000< li>
  • Replaces Ford Casting number 310098< li>
  • Engine 134< li>
  • Cylinders 4< li>
  • Casting No. 310098< li>
  • 1 2" head bolts< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205529)
$1350.01

Cylinder Head with Valves, Remanufactured, EAE6085E -
  • For Ford tractor models NAA (600), 600, 700, 2000< li>
  • Replaces Ford Casting number EAE6085E, 310098, EAE6090F< li>
  • Engine 134< li>
  • Cylinders: 4< li>
  • Casting No. EAE6085E, EAE6090F, 310098< li>
  • 7 16" head bolts< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 205423)
$1275.01

Flywheel Bolt Kit - From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Part No: 179185)$16.95

Governor Assembly - This Governor Centrifugal Assembly, is an improved weight type. Fits Ford gas engines. Tractors: (NAA, 600, 700, 800, 900). (replaces the flyball type when used with NCA99810A governor compensator rod and spring assembly); 501, 601, 701, 801, 901, 2000 (4 cylinder), 4000 (4 cylinder). (Part No: 115381)$95.00

Governor Ball - These are 3 4 Inch Governor Balls used in production 1952-1958. Later style governors did not use these, and many older tractors have upgraded governors without ball bearings. Replaces part numbers 86624946, 8NNN18229 (Part No: 178188)$1.06

Governor Compensating Spring - Mounts between bellcrank and underneath battery tray. For tractor models NAA, Jubilee. (Part No: 178184)$5.95

Governor Shaft Oil Seal - Governor Shaft Oil Seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Part No: 178055)$9.16

Lifter - Valve Lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Part No: 160900)$8.00

Push Rod, 5/16 Diameter - If replacing 1 4 inch outside diameter push rod (early 134 engines), you must also use part number 87801302 rocker adjusting screw (not available through YT) and F3JL6500AA Lifter. This push rod measures 9.61 inches overall length and 5 16 inch outside diameter. For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Part No: 182481)$11.90

Ring Gear, Flywheel - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Part No: 110232)$25.49

Tappet - For tractor models 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Part No: 160900)$8.00

Timing Gear Set - Standard press on cam timing gear set includes EAF6306B crankshaft gear and EAF6256M camshaft gear. For models (2000 and 4000 both 1962-64), 500, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. Verify part numbers to ensure fit. (Part No: 149997)$84.00

Valve, Exhaust - Exhaust Valve. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 172539)$10.30

Valve, Exhaust - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 172539)$10.30

Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: 172539)$10.30

Valve, Intake - Intake Valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: 172846)$6.40

Valve Key, Intake and Exhaust, 1/2 - Sold per 1 2 valve, order 2 per valve. 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Part No: 107088)$0.46

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve-Kit)$0.00

Valve Spring - Used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Part No: 173016)$2.50

Valve Stem Cap, Exhaust - This Valve Stem Cap is used on Exhaust Valves, 4 cylinder Ford, 1953-1964. 4 Used per engine. Priced and sold each. Replaces 8EQ6550A (Part No: 168344)$4.66

 
Engine Pistons and Sleeves
Piston, .020 Overbore, 134 CID Gas Engine - Overbore .020 inch 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For the following models using 134 CID gas engine (1953-1964): NAA, 500, 501, 600, 601, 700, 701, 2000. (Part No: 185430)$55.87

Piston, .030 Overbore, 134 CID Gas Engine - Overbore .030 inch 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For the following models using 134 CID gas engine (1953-1964): NAA, 501, 600, 601, 700, 701, 4000. (Part No: 184928)$51.89

Piston, .040 Overbore, 134 CID Gas Engine - Overbore .040 inch 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For the following models using 134 CID gas engine (1953-1964): NAA, 501, 600, 601, 700, 701, 4000. (Part No: EAE6108K)$63.56

Piston, Standard, 134 CID Gas Engine - Standard 3-ring piston (Rings NOT included) with pin and locks. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 500, 501, 600, 601, 700, 701, 4000. (Part No: 184397)$36.30

Piston with Pin - The original bore on a 134 CID gas engine is 3.4375 inches. This piston is for a 3.5000 inch overbore. Includes piston, pin and retainers. For rings, order part number PRS110. (Part No: 184685)$33.67

Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3 4" threaded spanner nut. (Part No: E2NN3X-SK)$45.93

Sleeve - Standard sleeve for 134 CID gas engine. For tractor models: 500, 501, 600, 601, 700, 701, NAA, 2000. Replaces B3NN6055A. (Part No: 128716)$43.76

 
Engine Rings
Piston Ring Set - For 2000, NAA, 501, 600, 700. 134 CID gas engines. 3.5 inch bore, 2 Compression @ 3 32, 1 Oil @ 3 16. Set for 1 engine. (Part No: 184604)$85.95

Piston Ring Set - 3-7 16" bore, 8 compression rings 3 32", 4 oil rings 3 16". Complete set for 1 engine. For tractor models NAA, 501, 541, 600, 601, 700, 701, 2000, NAB. All with 134 CID engine. (Part No: 174336)$80.00

Piston Ring Set - .020" Oversize - 4 Cylinder -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • Standard Bore: 3.4375”< li>
  • Ring Size: .020" Oversize< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as 4 Cylinder Piston Ring Set< li>
  • For .020" Oversize - Single Cylinder Piston Rings use Item #: 120833< li> < UL> (Part No: 174343)
$83.00

Piston Ring Set - .020" Oversize - Single Cylinder -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • Standard Bore: 3.4375”< li>
  • Ring Size: .020" Oversize< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold per cylinder< li>
  • Piston Ring Set - .020" Oversize - 4 Cylinder use Item #: 120836< li> < UL> (Part No: 120833)
$20.50

Piston Ring Set - .030" Oversize - Single Cylinder -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • Standard Bore: 3.4375”< li>
  • Ring Size: .030" Oversize< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold per cylinder< li>
  • Piston Ring Set - .030" Oversize - 4 Cylinder use Item #: 120836< li> < UL> (Part No: 120834)
$20.50

Piston Ring Set - .040" Oversize - 4 Cylinder Set -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • Standard Bore: 3.4375”< li>
  • Ring Size: .040" Oversize< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as 4 Cylinder Piston Ring Set< li>
  • Piston Ring Set - .040" Oversize - Single Cylinder use Item #: 120836< li> < UL> (Part No: 174333)
$117.00

Piston Ring Set - .040" Oversize - Single Cylinder -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • Standard Bore: 3.4375”< li>
  • Ring Size: .040" Oversize< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold per cylinder< li>
  • For standard use Item #: 174333< li> < UL> (Part No: 120836)
$30.26

Piston Ring Set - .060" Oversize - 4 Cylinder -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • Standard Bore: 3.4375”< li>
  • Ring Size: .060" Oversize< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold as a complete 4 cylinder set< li>
  • For standard use Item #: 150193< li> < UL> (Part No: 129137)
$80.00

Piston Ring Set - 3.500" Overbore - 4 Cylinder Set -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas, 3.4375" standard bore)< li>
  • Replaces Ford OEM number AE6149A< li>
  • Overbore: 3.500"< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold s 4 Cylinder Piston Ring Set< li>
  • Piston Ring Set - 3.500" Overbore - Single Cylinde use Item #: 120759< li> < UL> (Part No: 174351)
$70.00

Piston Ring Set - 3.500" Overbore - Single Cylinder -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas, 3.4375" standard bore)< li>
  • Replaces Ford OEM number AE6149A< li>
  • Overbore: 3.500"< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold per cylinder< li>
  • Piston Ring Set - 3.500" Overbore - 4 Cylinder use Item #: 174351< li> < UL> (Part No: 120759)
$18.50

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32"), 4. Number and size of oil rings for each piston (Ex: (1) 5 32"). (Part No: RING-SETS)$0.00

Piston Ring Set - Standard - Single Cylinder -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 2000, 2100< li>
  • Compatible with Ford Engine(s) 134 (gas)< li>
  • Bore: 3.4375”< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (2) @ .094"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .094"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .094"< li>
  • 2nd Groove Style: Reverse Torsional Taper Face< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Chrome Rail Oil Ring Spacer< li>
  • Sold per cylinder< li>
  • For Piston Ring Set - Standard - 4 Cylinder use Item #: 120836< li> < UL> (Part No: 120838)
$20.50

 
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 118823)$116.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119038)$91.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 114858)$120.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 173286)$112.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 173287)$132.30

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119080)$170.60

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 173281)$82.00

Elbow to Exhaust Manifold Gasket - Fits 134 CID Gas Engines 1953 to 1964 on models: NAA, 600, 601, 700, 701. 172 CID Gas Engines 1955 to 1957 on models: 800, 801, 900, 901, 2000, 4000. Use with elbow NAA55250B and muffler NAA5230E. **Price per each. (Part No: 121815)$1.32

Exhaust Elbow With Gasket - Outlet is 1 5 8 inch outside diameter. For 2000, 501, 600, 601, 700, 800, 801, 900, 901, 1800, 1801, NAA. All with 134 or 172 CID engine. Replaces NAA55250B (Part No: 185223)$41.72

Exhaust Manifold Elbow -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 2000< li>
  • Replaces Ford OEM number NAA55250B< li>
  • 1-5 8" O.D.< li> < UL> (Part No: 101518)
$21.00

Exhaust Pipe, Curved - Outlet pipe, horizontal, curved section. Outlet 1-1 2 inch outside diameter. For 134 CID gas engines. Tractors: 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771. 172 and 134 CID gas engines. Tractors: 800, 820, 840, 850, 860 (1955 to 1962), 900, 950, 960, 2000 (4 cylinder 1963 to 1964). Does not include row crop tractors. There is an additional shipping cost for this product of $15.00 (Part No: 114744)$25.26

Exhaust Pipe, Horizontal - Outlet pipe extension, rear straight section. For: NAA, 2000 (1963-1964), 501, 600, 601, (1958-1962 with 134 gas engine), 700, 701 (1958-1962 with 134 gas engine), 800 (1955-1957 with 172 gas engine). Dimensions: Inlet inside diameter 1-1 2 inch, length 54 inch, outlet outside diameter 1-1 2 inch. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 115438)$19.76

Extension Pipe - Vertical Two-Piece Exhaust Pipe with Clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5 8 inch inside diameter, outlet 1-3 4 inch outside diameter. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: 115465)$40.70

Intake and Exhaust Manifold Gasket Set - For Gas Engine Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All from 1953-1964. Contains two manifold gaskets, two different size carburetor to manifold gaskets, and elbow gasket. Replaces NAA55232A, 87018642, C0NN9448C (Part No: 101517)$10.95

Manifold, Gas - Intake and Exhaust Manifold. For 4 Cylinder Gas Engines in NAA, Jubilee, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accommodate different carburetors. Order the gaskets (C0NN9448C) separately. (Part No: 101516)$130.00

Manifold Nut and Washer Kit - This Brass Manifold Nut and Washer Kit is used on Ford 134 and 172 gas engines from 1953 to 1964. For models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 and 4000. One set per tractor. (Part No: 153429)$7.66

Muffler -
  • For Ford tractor models NAA, 501, 600, 700, 800, 900, 2000, 4000< li>
  • Replaces OEM number FO12, AFD1210, FO-12< li>
  • Inlet Inside Diameter: 1 5 8"< li>
  • Outlet Outside Diameter: 1 3 4"< li> < UL> (Part No: 182599)
$59.00

Muffler Clamp, 1-1/2 - New Clamp for 1-1 2 inch outside diameter muffler inlet. (Part No: 108865)$3.20

Muffler Clamp, 1-1/4 - New Clamp for 1-1 4 inch outside diameter muffler inlet. (Part No: 182682)$3.70

Muffler Clamp, 1-3/4 - New Clamp for 1-3 4 inch outside diameter muffler inlet. (Part No: 108866)$3.56

Muffler Clamp, 1-3/8 - New Clamp for 1-3 8 inch outside diameter muffler inlet. (Part No: 182687)$1.60

Muffler Clamp, 2-1/4 - New Clamp for 2-1 4 inch outside diameter muffler inlet. (Part No: 108870)$3.56

Muffler Clamp, 2-3/4 - New Clamp for 2-3 4 inch outside diameter muffler inlet. (Part No: 108872)$3.55

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: 108873)$4.66

Muffler Clamp, 3-1/2 - New Clamp for 3-1 2 inch outside diameter muffler inlet. (Part No: 108874)$10.20

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: 108875)$4.66

Muffler Clamp, 4-1/2 - New Clamp for 4-1 2 inch outside diameter muffler inlet. (Part No: 118838)$10.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: 118841)$12.76

Muffler, Horizontal - For tractor models NAA, Jubilee, 501, 600, 601, 700, 4-cylinder 2000 (1953-1964), 800, 900, (1955-1957), 4-cylinder 4000 Series (1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length 2-1 4 inch, inlet tube 1-5 8 inch ID, shell length 13 inch, shell diameter 3-1 4 inch, outlet tube length 2-1 4 inch, outlet tube outside diameter 1-5 8 inch OD, muffler overall length 17-1 2 inch. (Part No: 100570)$20.67

Muffler & Pipe Assembly, Vertical - For the following 134 CID gas tractors: NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-1964. For the following 172 CID gas tractors: 800, 900, ALL 1955-1957 and the 4-cylinder 4000 series 1958-1964. This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5 8 inch inside diameter (verify that you have a 1 5 8 inch exhaust elbow), outlet 1-3 4 inch outside diameter. The order of this exhaust system is exhaust elbow (not included) exhaust pipe, then muffler above the hood. (Part No: 100580)$55.26

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: 108632)$6.96

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: 108633)$8.00

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: 108635)$10.30

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: 108636)$10.30

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: 108643)$11.40

Rain Cap - This rain cap is for a 4.00 inch pipe. (Part No: 108645)$13.26

Rain Cap - This rain cap is for a 4.50 inch pipe. (Part No: 108749)$14.00

Rain Cap - This rain cap is for a 5.00 inch pipe. (Part No: 108750)$15.26

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 179749)$5.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 185428)$9.50

Vertical Exhaust Assembly - For tractor models: Jubilee, NAA, 600, 700, 800, 900, 2000 (1964 and earlier), 4000 (1964 and earlier). All with gas engines. Two piece assembly. NO MUFFLER INCLUDED. THIS ASSEMBLY GIVES MAXIMUM EXHAUST FLOW FOR MORE POWER. 1 3 4 Inch OUTLET DIAMETER, 1 5 8 Inch INLET DIAMETER. (Part No: 115465)$40.70

Vertical Exhaust Pipe - This Vertical Exhaust Pipe comes with support bracket. It does not come with a muffler. Pipe inlet 1-3 8 inch I.D., outlet 1-1 2 inch. It is for gas models NAA, 500, 501, 600, 700, (4 cylinder 2000 and 4000 1953 to 1964), 800, 900. All with the 134 and 172 cubic inch engines. (Part No: 111035)$32.00

Vertical Muffler & Pipe Assembly - For tractor models 1964 and earlier 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11 16 inch inlet and 1 3 4 inch outlet. This is one piece welded construction. $20.00 additional shipping due to weight. This additional charge will be added to your order. FO-21 (Part No: 100579)$81.50

 
Fuel System / Air Intake
Air Cleaner Assembly - For NAA, Jubilee, 600. Restoration Quality Air Cleaner Assembly. Includes cup. "HH" stamped into upper cylinder. 7-1 4 inches center to center bolt pattern. 15-1 2 inches tall Also replaces EAE9600D, EAE9600E. (Part No: 125727)$147.00

Air Cleaner Cup - This new air cleaner oil cup measures 5 inches outside diameter at the lip and is 3-1 8 inches tall. This cup is used for the clip type air cleaner (not the clamp type). Please measure your cup prior to ordering. Fits on bottom of 8N9600B air cleaner on 8N. Gasket 9N9623B available separately. On the 800 and 900 series tractors, it is serviceable. It will look different but fit fine. Replaces: 8N9658, 8N9658C, Serviceable for: B9NN9658A. (Part No: 179783)$25.99

Air Cleaner Cup - For tractor models NAA, Jubilee, 600, 700, 800, 900. 4 7 8 inch diameter, 3 5 8 depth. Replaces OEM # B5NN9658A. (Part No: 178104)$26.26

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2 inch x 3-1 4 inch. (Part No: 151026)$13.95

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2 inch x 3-1 4 inch. (Part No: 151026)$13.95

Air Cleaner Funnel Screen - Air Cleaner Funnel Screen is for tractor models NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964). TIS (Part No: 126374)$5.70

Air Cleaner Grille Door with Screen and Thumb Screw -
  • For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number NAA9661B, NAA9669A< li>
  • Includes: Air cleaner grille door, screen and thumb screw< li> < UL> (Part No: 126375)
$24.80

Air Cleaner Tube - Has 1 5 8 inch outside diameter. For tractor models NAA, Jubilee, 601, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681 gas and LP 1953 and up. Requires two 9N9652 air hoses, not included. (Part No: 126390)$36.76

Air Funnel - For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900 950, 960, (2000, 4000 ALL < 1964). (Part No: 151929)$26.50

Air Hose to Carburetor - 1.5 Inches - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3 8 inches long, 1 1 2 inch inside diameter. (Part No: 149842)$2.90

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: NAA, Golden Jubilee replaces TSX428. Center to center on the 2 mounting bolts is 2 1 4 inches. Made in USA, 1 year warranty. (Part No: 100757)$480.00

Carburetor Bowl to Body Gasket -
  • For Ford tractor models NAA, 2N, 8N, 9N, 501 (4 cyl, 1 57-12 62), 541 (4 cyl, 1 59-12 64), 600, 600 (4 cyl, 1 57-12 57), 601 (4 cyl, 1 57-12 62), 611 (4 cyl, 1 59-12 64), 620 (4 cyl, 1 54-12 64), 621 (4 cyl, 1 58-12 64), 630 (4 cyl, 1 55-12 57), 631 (4 cyl, 1 58-12 64), 640 (4 cyl, 1 55-12 57), 641 (4 cyl, 1 58-12 64), 650 (4 cyl, 1 56-12 57), 651 (4 cyl, 1 58-12 64), 660 (4 cyl, 1 59-12 63), 800, 900, 2000 (4 cyl), 2031, 2111, 2120, 2131, 4000 (4 cyl), 4000SU (4140), 4030, 4031, 4110 (TR, 4 cyl, 1 63-12 64), 4120, 4121, 4130, 4131, 4140 (4 cyl, 1 63-12 64)< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030< li>
  • Replaces Ford OEM number C3NN9516A< li>
  • Fits Ford Construction & industrial models 2130< li> < UL> (Part No: 176410)
$8.80

Carburetor Butterfly - Fits Marvel Schebler TSX33, TSX241, TSX241A, TSX241B, TSX241C, TSX420. For tractor models NAA, NAB, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 182734)$4.20

Carburetor Elbow & Strainer - For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600 series, 700 series, 800 series. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1 8 inch pipe threads. Female end is 1 4 inch flair. (Part No: 110005)$4.40

Carburetor Float - This carburetor float is 2.25 inches wide and is used for the following tractor models: 8N, 900, NAA, and Jubilee all using Zenith carburetor models: 10850, 13876, 13877, 12493, and 13879. (Part No: 108454)$16.99

Carburetor Float, Small Bowl - Small Bowl Carburetor Float for Marvel Schebler carbs (2 3 8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (year): 134 CID (1953 to 1954) or 172 CID (1955 to 1957) gas engines on tractors: NAA, 501, 601, 700, 701, 800, 801, 900, 901, 2000. (Part No: 108449)$9.16

Carburetor Gasket Set - For tractor models 8N, 9N, NAA, Golden Jubilee, Jubilee, 600, 800, 2N, 620, 630, 640, 650, 660, 700, 740, 820, 840, 850, 860, 900, 950, 960, NAB with the following Marvel Schebler carburetors: TSX101, TSX126, TSX133, TSX137, TSX144, TSX151, TSX161, TSX171, TSX179, TSX197, TSX211, TSX241A, TSX241B, TSX241C, TSX246, TSX258, TSX290, TSX297, TSX301, TSX33, TSX341, TSX37, TSX38, TSX407, TSX420, TSX423, TSX44, TSX447, TSX453, TSX481, TSX55, TSX577, TSX580, TSX593, TSX69, TSX748, TSX76, TSX765, TSX771, TSX787, TSX79, TSX80, TSX818, TSX827, TSX83, TSX94, TSX976, TSXU829, TSXU832, TSX198, TSX241, TSX241A, TSX241B, TSX241C, TSX305, TSX319, TSX420, TSX428, TSX500, TSX551, TSX577, TSX580, TSX593, TSX692, TSX706, TSX771, TSX976, TSXU834 (Part No: 182465)$2.66

Carburetor Gasket Set - This gasket set is for all Models 1953-1957, using Marvel Schebler carburetor. Used on the following Marvel carbs: TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 (Part No: 182503)$4.40

Carburetor Kit, Basic - Basic Carburetor kit with Viton Needle and Seat. For tractor models 2000, 501, 600, 601, 700, 701, NAA, Jubilee. For Marvel-Schebler TSX428, TSX580, EAE9510C, EAE9510D. (Part No: 118644)$22.00

Carburetor Kit, Basic - Kit for Zenith 12493, 13879, 13800 and 13877 carb used on NAA, Jubilee, 800 series, 900 series tractors. (Part No: 100740)$23.50

Carburetor Kit, Complete - For tractor models NAA, Jubilee 1953-64 with 134 CID gas engine, 600 and 700 1955-1957 with 134 CID gas engine, all with a Marvel-Schebler TSX428 or TSX580. Complete Carburetor Rebuild Kit. Rebuilds OEM Carb numbers: EAE9510C, EAE9510D, B2NN9510A, B4NN9510A. (Part No: 112352)$48.95

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX428. For the following tractor models: NAA, Jubilee. Center-to-center on the mounting bolts is 2 1 4 inches. Add $25.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Part No: 203254)$248.01

Choke Cable - Universal choke cable 72 inches long, 7 16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: 178125)$17.00

Choke Fly Assembly - Choke Fly Assembly 1-5 16 inch diameter. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 108473)$34.76

Choke Knob - For Ford Gas Tractors 1939-1964. Fits models: NAA, Jubilee, 2N, 8N, 9N, 501, 600, 601, 6411, 700, 701, 801, 900, 901, 2000, 4000. Replaces 9N9703, 9N9703B. 10-32 thread. (Part No: 178058)$13.30

Choke Rod Assembly - This is the Carburetor Choke Control Rod Assembly for Ford tractors 1953-1964. Uses 9N9703 or 9828014 knob. Approximately 26-7 16 inches long. Not included. Replaces NAA9705B. (Part No: 182994)$15.95

Cyclone Air Cleaner Glass Jar - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cyclone Air Cleaner Glass Jar (jar only) screw on type. Exactly like original for tractors that used the "Cyclone" air cleaner only. (Part No: 178043)$21.95

Cyclone Air Cleaner Glass Jar Seal - Cyclone Air Cleaner Glass Pint Jar Seal (Part No: 184394)$2.50

Filter Screen and Gasket for Sediment Bowl - 1-1 2 inch outside diameter seal (for a 1 9 16 inside diameter housing and a 1 3 8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Part No: 150700)$6.06

Friction Disc for Throttle Control Lever - This Throttle Friction Disc is 3 inches in diameter and has a 1 2 inch center hole. Replaces part number C5NN518B, 83924272, 83977032, 9N518, E6NN9R536AA, 311503. (Part No: 111446)$1.49

Fuel Sediment Bowl Assembly - For models 8N, 9N, 2N, NAA and Jubilee with SHORT BOWL. The fuel bowl assembly has a 3 8 inch NPT male inlet and 1 4 inch female outlet, 1-1 4 inch long bowl. Works with 9N9282A fuel line. Replaces 2N99155B and NAA9155B with short bowl. (Part No: 105381)$13.75

Fuel Sediment Glass Bowl - 2 inch Glass Bowl. Fits NAA9155B and 2N9155B sediment bowls. Uses gasket NAA9160A, not included. Fits 8N, 9N, 2N, NAA, Jubilee. (Part No: 105382)$2.99

Fuel Sediment Screen and Gasket - Gasket and Screen Set (for 2 inch outside diameter sediment bowl). Ford 8N, 9N, 2N, NAA, 600, 601, 700, 800, 801, 900. (Part No: 105383)$2.10

Fuel Tank - For Gasoline engines 11 gallon, no opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. It can be used for diesel if you install a diesel return line. Fits: NAA, Jubilee 1953-1954; 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 103892)$208.00

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: 107976)$34.76

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: 114940)$8.99

Main Adjusting Needle Spring, Pack of 5 - Used with 9N9565C and EAE9565A main adjusting needles on Marvel Schebler Carburetors (Part No: 183842)$2.80

Sediment Bowl Screen -
  • For Ford tractor models NAA, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981
  • Replaces Ford OEM number 2N9161< li> < li>
  • Compatible with Massey Ferguson tractor models Super 90 (gas s n 888674- later), TO20, TO30, TO35 (gas), 35, 50 (gas), 65, 65 (gas), 85 (gas s n 807751-earlier), 88, 88 (gas)< li>
  • Compatible with Massey Ferguson Construction & industrial models 202 (s n 309328-earlier), 204 (s n 343891-earlier), 302 (s n 119700213-earlier), 304 (s n 119750210-earlier), 356 (gas s n 670001084-earlier)< li>
  • Square hole< li>
  • For 2" O.D. sediment bowl< li> < UL> (Part No: 110833)
$1.26

Sediment Bowl Screen & Gasket -
  • For Ford tractor models NAA, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2111, 2131, 4030, 4120, 4130, 4131, 6000< li>
  • Compatible with Ford Construction & industrial models 541, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number C0NN9161A< li> < UL> (Part No: 105386)
$1.86

Thottle Control to Bellcrank Rod - This Throttle Control to Bellcrank Rod is used on non-diesel fords, 1953 to 1964 and is 4 1 4 inches overall length. It replaces original part number NAA9815C. (Part No: 183034)$11.36

Throttle Bellcrank Friction Disc Spring Washer - 2-7 16 inch diameter, 7 16 inch center hole. For tractor models: NAA, NAB, Jubilee, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cylinder 1953 thru 1964). (Part No: 178048)$7.95

Throttle Body To Bowl Gasket -
  • For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 4000< li>
  • Replaces Ford OEM number EAF9519A< li> < UL> (Part No: 111270)
$1.16

Throttle Control Rod - 4-1 2 inch overall length, includes one Spring Steel Clip at each end of the rod. For tractor models NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1953 thru 1964 gas only. Replaces C0NN9A790A. (Part No: 179893)$22.50

Throttle Control Rod - Governor to Carburetor, Clevis End is not included. For tractor models: 2000 4 Cylinder, 4000 4 Cylinder, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 4-Cylinder Gas 1953 thru 1964. Replaces 86552618. (Part No: 153500)$19.76

Throttle Control to Governor Rod - This throttle control to governor rod is used on Ford NAA Jubilee tractors, 1953 - 1954. It replaces original part number NAA99817C, NAA-99817-C (Part No: 183036)$13.95

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Part No: 164360)$1.56

 
Gauges
Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Part No: 110410)$6.60

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1 4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: 178318)$57.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: 178285)$40.00

Instrument and Gauge Kit 4 Speed - For NAA, Jubilee, 600, 700 with 4 speed transmission, 800, 900. ALL 1953 to 1957. Instrument and gauge kit contains: proofmeter, oil gauge 80 lb., ammeter 30 amp, temperature gauge and instrument lamp assembly 6 volt. (Part No: 120573)$124.00

Instrument and Gauge Kit 5 Speed - For NAA, Jubilee, 600, 700 with 5 speed transmission, 800, 900. ALL 1953 to 1957. Instrument and gauge kit contains: proofmeter, oil gauge 80 lb., ammeter 30 amp, temperature gauge and instrument lamp assembly 6 volt. (Part No: 120574)$121.00

Instrument Panel Light - 12 Volt for tractor models NAA, Jubilee, 501, 600, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. Includes bulb, light fixture and wire leads. (Part No: 125669)$26.99

Instrument Panel Light Assembly - 6 Volt Light Assembly. For Model: 8N. (Part No: 125711)$47.00

Instrument Panel Light Assembly - This 6 volt dash light is for tractor models: NAA, NAB, 600, 700, 800, 900. Replaces 78-13466, C3NN14662A, NCA13771A. (Part No: 125711)$47.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8 inch pipe thread to 1 8 inch tube. Brass. (Part No: 179540)$17.50

Oil Pressure Gauge - For tractor models: 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 2000, 4000, NAA, Jubilee. All before 1964. Oil pressure gauge, 40 pounds, 2 inch body diameter. Replaces OEM numbers Ford: FAD9273A and Massey Ferguson: 506902M92. (Part No: 113472)$16.10

Oil Pressure Gauge, 80 Pound, Black - For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1 8 inch NPT thread. Replaces FAD9273A. (Part No: FAD9273A_Black)$10.90

Oil Pressure Gauge Black Bezel -
  • For Ford tractor models NAA, 2N, 8N, 9N, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140< li>
  • Replaces Ford OEM number FAD9273A< li>
  • Raised Black Bezel< li>
  • Black Face< li>
  • Dash Mounted< li>
  • 1 8" Male Pipe Threads< li>
  • 0 - 80 PSI< li>
  • Oil Pressure Gauge - Chrome Bezel use Item #: 110411< li> < UL> (Part No: 121629)
$10.90

Proofmeter Drive Adapter Shaft - For tractor models 1953-1964: 2000 and 4000 4 cylinder, 501, 600, 700, 800, 801, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. VERIFY SIZE overall length of 1.672 inch and outside diameter of 0.435 inch. Fits both Vane and Piston Pumps. (Part No: 113716)$23.26

Proofmeter Drive Bolt - This Drive Bolt fits the following models with Vane and Piston Type Hydraulic Pumps 1953 to 1964: Jubilee, NAA, NAB, 2000 4 cylinder, 4000 4 cylinder, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140. Replaces: EAF951A. (Part No: 113717)$13.26

Proofmeter Drive Bushing - For tractor models 1953 to 1964: 2000 and 4000 4 cylinder, 501, 541, 600, 700, 800, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. Verify size 1.275 overall length, 5 8 - 18 threads. Fits Vane and Piston Type Pumps. (Part No: 113715)$22.50

Tachometer Cable - Ford Proof Meter Tach cable 30 1 2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 158307)$15.50

Tachometer Cable, Steel - Ford Steel Jacketed Proof Meter Tach cable 30 1 2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 102193)$11.80

Tachometer (Proofmeter) - This proofmeter is used on Ford tractors 1953-1964 with 4-Cylinder Engines and 4-Speed Transmissions (1953-1964). Replaces C3NN17360N. (Part No: 100613)$20.00

Tachometer (Proofmeter) Gauge - 4 Speed with OEM Style Needle -
  • For Ford tractor models NAA, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 941, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number C3NN17360N< li>
  • 4 Speed Transmission< li>
  • OEM style needle< li>
  • For 5 speed gauge use Item #: 100613< li> < UL> (Part No: 121650)
$33.50

Temperature Gauge -
  • For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000< li>
  • Replaces Ford OEM number C3NN18287A< li>
  • Chrome Bezel< li>
  • Capillary Lead Length: 41-1 2"< li>
  • 5 8" - 18 UNF Fitting With 1 2" NPT Pipe Bushing< li>
  • Bracket Included< li> < UL> (Part No: 178051)
$36.50

Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch diameter, 34 inch capillary tube length. Replaces FAD10883A. NOTE, the probe on this gauge is 0.374 inches in diameter. Some early heads had a smaller opening. Verify before ordering. (Part No: 103887)$19.00

Temperature Gauge, Chrome Rim - For tractor models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch face diameter. Approximately 41-1 2 inches capillary lead length, 5 8 inch x 18 UNF fitting with 1 2 inch NPT pipe bushing. Replaces FAD10883A, and C3NN18287A. NOTE: The probe on this gauge is 0.374 inches in diameter. Some early heads had a smaller opening. Verify before ordering. (Part No: C3NN18287A-Chro)$36.50

 
Hitch / Drawbar
Chain - CHAIN, Fixed Drawbar Safety Chain Assembly, EXACT reproduction of ORIGINAL Drawbar Chain. FOR tractors: 8N, 9N, 2N, Jubilee, NAA (1939-1954). (Part No: 178494)$59.95

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models NAA, Jubilee, 2N, 8N, 9N, 340, 420, 600, 700, 800, 900, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Part No: 172986)$8.60

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Part No: 115051)$35.76

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1 2 inch L hole center to hole center, 2 1 2 inch wide, 1 1 8 inch thick (drawbar fits lift between lift arms). $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 103174)$44.26

Drawbar Link Check Chain Anchor - Anchor, Drawbar Link Check Chain (pair- one right and one left). For Dexta, NAA, Super Dexta, Jubilee, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: 186635)$15.01

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11 16 inches. Thread diameter is 1 2 inch. Eyelet is 1 4 inch diameter. Replaces EC0N660A, NCB660A (Part No: 111911)$4.66

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3 16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5 32 inch, length 2 15 16 inches), four(4) of HP-5 (wire diameter 1 8 inch, length 2 9 16 inches), and three(3) of HP-6 (wire diameter 3 32 inch, length 1 5 8 inches). (Part No: 182461)$10.86

Hitch Ball 10000LB 2-5/16 - 2-5 16 inch ball size, 1-1 4 inch stud thread, 2-1 2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: 178287)$29.50

Hitch Ball 10000LB 2-5/16 - 2-5 16 inch ball size, 1-1 4 inch stud thread, 2-1 2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: 178287)$29.50

Hitch Ball 15000LB 2-5/16 - 2-5 16 inch ball size, 1-3 8 inch stud thread, 2-5 8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: 178289)$16.00

Hitch Ball 15000LB 2-5/16 - 2-5 16 inch ball size, 1-3 8 inch stud thread, 2-5 8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: 178289)$16.00

Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3 4 inch stud thread, 1-7 8 inch stud length, 3500 lb. max load capacity, one two chrome hitch ball class. (Part No: 157028)$9.80

Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3 4 inch stud thread, 1-7 8 inch stud length, 3500 lb. max load capacity, one two chrome hitch ball class. (Part No: 157028)$9.80

Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1 8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: 157024)$8.80

Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1 8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: 157024)$8.80

Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5 16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: 157017)$12.26

Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5 16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: 157017)$12.26

Leveling Box Assembly, Left - Left Hand Rod and Fork Assembly, hydraulic lift, left hand. For 8N, 9N, 2N, NAA, Jubilee, tractors. 1939 to 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 115097)$52.00

Leveling Box Assembly Less Fork -
  • For Ford tractor models NAA, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000< li>
  • Replaces Ford OEM number 8N577A, 180854M91< li>
  • Without fork< li>
  • For 14-3 4" Fork use Item #: 108897< li> < UL> (Part No: 107886)
$56.00

Leveling Box Assembly, Right - This Right Hand Leveling Box Assembly uses 5 8 inch pins and opens center-to-center from 17.75 to 21.5 inches. Adjusts 21.5 inches. Width of the fork is 9 16. For 8N, 9N, 2N, NAA, Jubilee. (Part No: 113624)$71.20

Leveling Box - Economy - For tractor models 8N, 9N, 2N, NAA, Jubilee, Dexta, Super Dexta. Working length of 19.5 to 27 inches. Pin holes are 3 4 inch. (Part No: 182800)$32.76

Leveling Box Knuckle Pin - MUST ORDER IN QUANTITY 2, PRICED EACH. For tractor models NAA, 600, 601, 700, 701, 800, 801, 801, 701, 801, 900, 901, 8N, 9N, 2N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5 8 inch pin diameter, 2 7 8 inch usable length. Takes our 3 16 inch linchpin (part number DKP316). MUST ORDER IN QUANTITY OF 2, PRICED EACH. (Part No: 111799)$1.80

Leveling Box Shaft - This Leveling Box Shaft and Gear measures 14 inches long with thread length of 4 inches. Diameter is 3 4 inches. For Jubilee, NAA, Dexta, Super Dexta, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000. (Part No: 113926)$12.80

Leveling Box Yoke Rod, LH - Left hand side. Rod diameter is .750 inches. For tractor models NAA, Jubilee, 2N, 8N, 9N, 30, 340, 420, 600, 620, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4110. (Part No: 115632)$23.26

Leveling Rod, Left Hand - Lift Link, left hand, non-adjustable. Hole centers approximately 20 inches. Replaces 9N564B, C5NN564B. (Part No: 111007)$35.00

Link End - Plated, forged, 1-1 4 inch thread, left hand, 1 inch hole. (Part No: 180473)$20.50

Link End - Plated, forged, 1-1 4 inch thread, right hand, 1 inch hole. (Part No: 174507)$21.60

Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5 8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Part No: 190743)$1.25

Lower Link Support Pin, 5 1/8 Inches - This Lower Link Support Pin measures 5 1 8 inches long. It is for tractors less Differential Lock for models 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA. Replaces NCA563C, 81801640, 87712982 (Part No: 154027)$17.76

Pin, Hydraulic Lift Yoke - Hydraulic Lift Yoke Pin measures 1 inch diameter and 3 1 4 inches in length. For tractor models 8N, NAA, Jubilee, (1950-1954). (Part No: 184042)$7.40

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8 inch mounting pins and adapter bushings, 27-1 4 inches width, 3-1 2 inch x 3-1 2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. This additional charge will be added to your order. (Part No: 180731)$325.00

Stabilizer Arm - Stabilizer arm measures length 31-1 2 inches center to center. For tractor models 2N, 600, 800, 8N, 9N, Jubilee, NAA, 2000 (4 cylinder), some 4000 (4 cylinder). Color of part can be red or primer depending on supply. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 110516)$12.26

Stabilizer Arm Blue - Arm only, blue. 31.50 inches center to center on holes. 7 8 inch pin holes. Replaces 230042 (Part No: 180774)$24.85

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7 8 inch hole diameter. 31 1 2 inches center to center. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 110516)$12.26

Stabilizer Bracket - Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Part No: 111709)$13.97

Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 8N, 9N, 2N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets with pins & hardware. 31.5 inches center to center. Additional $5 shipping due to weight. This additional charge will be added to your order. (Part No: 152387)$73.00

Stay Strap, Lower Blue - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (R3575) (Part No: 179230)$11.80

Stay Strap, Lower Red - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 111112)$9.20

Stay Strap, Upper Red - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Part No: 111113)$9.56

Swinging Drawbar - For 600, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Holes on the hitch side are 5 8 inches diameter and located 1-1 2 and 4-3 8 inches on center from end. Holes on the tractor side are 0.950 inches and are locates 1-5 8, 3-5 8 and 7-5 8 inches on center from the end. Used in 49A34R & 49A35. Replaces C0NN805F. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 109566)$48.00

Swinging Drawbar Clevis Assembly - Clevis Assembly with Pins for SDA6 or SDA8 kits. For tractor models 8N, NAA, NAB, 600, 601, 800, 801, 1801, 2000 4 cylinder, 4000 4 cylinder. (Part No: 178030)$57.99

Swinging Drawbar Clevis Pin - This Swinging Draw bar Clevis Pin is the original style and will only work with original style drawbar hangers. Measures 1 1 8 inch diameter and 2 1 2 inches in length without head. Used on Ford Tractors, 1948-1956 (Part No: 183030)$13.95

Swinging Drawbar Hanger - Drawbar Hanger. For 600, 8N, NAA. (Part No: 173155)$44.76

Thrust Bearing - Leveling Box Assembly Bearing. For 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600, Dexta, Super Dexta, Jubilee, NAA. (Part No: 179766)$7.70

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3 4 inch pin holes and both eyelets are 1 3 4 inch wide. Dichromate plated. (Part No: 103162)$24.26

Top Link Rocker - For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800 Hi-clearance, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000 4 cylinder Hi-clearance, 4000 4 cylinder Hi-clearance. (Part No: 126752)$44.95

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: 112156)$30.26

 
Hydraulic System
Coupler Flange - FORD: Drive flange; 5 8 inch round bore with set screw 1 4 inch x 3 8 inch # SSH4-6. Hydraulics: Drive flange; 5 8 inch round bore with set screw 1 4 inch x 3 8 inch # SSH4-6. 2-1 4 inch b-b (Part No: 108772)$34.00

Coupler Flange - Drive flange; 3 4 inch round bore with set screw 1 4 inch x 3 8 inch. 1-15 16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Part No: 112104)$18.76

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1 2 Outside Diameter and 2-1 4 inches long. It 7 8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Part No: 114586)$24.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: 183971)$24.76

Draft Control Plunger - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Fine Thread style. (Part No: 111890)$41.26

Draft Control Plunger Spring - This Draft Control Plunger Spring fits between the Hydraulic Plunger and Yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except row crop), Dexta, Super Dexta. (Part No: 165989)$38.00

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Part No: 178070)$13.00

Draft Control Spring Seat - Exact of original. Fits all models (1939 to 1964), NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Replaces: 2N624, 957E624. (Part No: 178127)$9.05

Felt, Spring Seat - Hydraulic Lift Draft Control Spring Seat. For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 178061)$5.80

Filter Assembly, Hydraulic Oil - 20 GPM Capacity Assembly with 10 Micron Element. 3 4 NPT ports. 4 inch diameter-7-1 2 inches long. Equipped with standard By-Pass Valve-opens at 15 PSI. Includes filter element. Order Replacement Element as part number 1A9021 (Part No: 182540)$33.26

FILTER ELEMENT - 25 Micron replacement element for SF1-25. (Part No: 182541)$11.97

FILTER ELEMENT - 10 Micron replacement element for SF1-10. (Part No: 120092)$9.69

Friction Disc for Hydraulic Control Lever - Friction Disc for Hydraulic Control Lever, 3 inch diameter, 1 2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Part No: 111446)$1.49

Hub - 7 8 inch, 13 spline threaded, 3-7 8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Part No: 160204)$63.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: 118257)$10.20

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1 2 inch inside diameter. 2 Wire. Solid Male 1 2 inch NPT thread on both ends. (Part No: 179906)$48.52

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1 2 inch I.D. double wire braid (SAE-2R) with 1 2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Part No: 118256)$12.50

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: 118259)$13.50

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. There is an additional shipping cost for this product: $5.00 (Part No: 118260)$14.00

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Part No: 118261)$16.26

Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1 4 x 20. (Part No: 111910)$29.99

Hydraulic Lift Cover Repair Kit - For NAA 1953-54, Jubilee. Lift Cover Repair Gasket Kit. The kit contains (2) NAA552A gaskets, (1) NAA553B gasket, (1) NAA473A backup washer, (1) NAA502A gasket, (1) NAA533A piston O-ring, (1) 44R011 O-ring, (1) 44R112 O-ring, (1) 44R113 O-ring, (1) 44R114 O-ring. (Part No: 150635)$7.90

Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Part No: 155017)$22.00

Hydraulic Lift Ram Arm - For NAA, Jubilee. (Part No: 179756)$127.00

Hydraulic Lift Shaft - For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7 16 inch-20 X 11 16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Part No: 165431)$399.47

Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Part No: 114032)$50.00

Hydraulic Lift Shaft Bushing - This Hydraulic Lift shaft Bushing measures inside diameter 2.000 inches, outside diameter 2-3 8 inches, length 3.00 inches. Sold individually, 2 used per tractor. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. Replaces 86534029, 9N531C (Part No: 173523)$13.50

Hydraulic Line Set - This manifold fits tractors with piston type pump (round body) for tractor models: Jubilee, NAA. (Part No: 178967)$303.96

Hydraulic Pump - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. +++ This item may take up to two weeks for delivery. (Part No: 126603)$1032.70

Hydraulic Pump Cover & Pin -
  • For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number 312059, NCA893A< li>
  • For Piston Pump Only< li> < UL> (Part No: 113714)
$114.00

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5 16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3 4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Part No: 128567)$19.00

Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3 4 inch diameter, 9-1 4 inch overall length. End A type: key, 3 4 inch size, End B type: 6 spline, 3 4 inch size. Associated components end A flex. coupler: L601-14 (3 4 inch bore drive flanges both sides), end B hub: 1 inch. Fits NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 112068)$25.26

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7 8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5 8 inches-12 ORB, PORT SIZE OUTLET: 1-5 16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7 8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5 8 inches-12 ORB, OUTLET: 1-5 16 inches-12 ORB. The 2 bolt mount slots are 9 16 inch & open on the ends. Minimum measurement between the slots are 5 1 4 inches and Maximum is 6 7 8 inches. (Part No: 127269)$560.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3 4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3 4 Inch NPT. Mounting bolt spacing 4 3 16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3 4X3 4 HC4008 adapter, 1-720FSO-1X1-1 4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Part No: 182700)$560.00

Hydraulic Pump Gear Housing - For tractor models NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 113718)$220.50

Hydraulic Pump Hub - Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7 8 inch outside diameter, 2 3 4 inches center to center on holes. 6 spline center bore, 3 4 inch inside diameter, 7 16 inch smooth ID mounting holes. (Part No: 111639)$36.26

Hydraulic Pump Mounting Gasket - On four cylinder Ford tractors 1953-1964, this gasket mounts both gear type and vane type hydraulic pumps to the engine. (Part No: 167408)$2.06

Hydraulic Pump Piston - Hydraulic pump piston with an diameter of 5 8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901 , 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000. (Part No: 184993)$16.26

Hydraulic Pump Pressure Plate - This hydraulic pump pressure plate is for Vane style pumps. It has a Manganese phosphate coating is 2.440 inches across and 0.797 inches tall. It is used on all 1954 to 1955, up to serial number 66849 using 3 4 inch wide vane style pumps. Replace original part number NCA969B. (Part No: 182959)$114.00

Hydraulic Pump Repair Kit - Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: 111682)$74.00

Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Part No: 111681)$62.50

Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Part No: 114636)$4.56

Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Part No: 114635)$2.75

Hydraulic Pump Shaft for Loader - APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421). SHAFT DIAMETER: 3 4 ", SHAFT OVERALL LENGTH: 8-3 8 ", END A TYPE: Key, END A SIZE: 3 4 ", END B TYPE: 10 Spline, END B SIZE: 1 ". (Part No: 172481)$81.00

Hydraulic Pump Shaft Oil Seal - For piston type pump. Measures inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 117609)$3.00

Hydraulic Pump Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Part No: 178969)$74.00

Hydraulic Spring Seat - For tractor models 8N, 9N, 2N, NAA, 600, 900 (1948-1954). Also replaces 181083M1 and 181098M1. (Part No: 182473)$10.95

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030)$787.98

Hydraulic Wobble Shaft Plate - For tractor models 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Part No: 172706)$78.80

LBP Coupler Center - Center member. Center member. 3-5 8" O.D., four 5 16" holes, 2-1 4" bolt circle (L52-10) For tractor models 352. (Part No: 178931)$61.00

Lift Piston - This is a single groove Hydraulic Lift Piston that measures 2-1 2 inches in diameter, groove is centered 1 1 4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models NAA, NAB, 8N, 9N, 2N, Jubilee. (Part No: 116069)$20.76

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1 8 inch diameter, four 1 4 inch holes, 1-15 16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Part No: 116952)$54.00

Quadrant Stop Kit - For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Part No: 126615)$7.95

Swivel - Draft Control - For tractor models NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except Row Crop), Dexta, Super Dexta. (Part No: 185370)$24.22

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9 16 inch-18 O-ring boss with two adapters 9 16 inch-18 ORBM x 1 4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7 16 inch barrel length, 1 inch rod end diameter, 1-3 4 inch rod end width, 1 inch diameter base end. (Part No: 167145)$295.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: 172285)$14.26

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: 172338)$14.00

Vane Type Hydraulic Pump Kit - For 5 8 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces: vane set: CPN981A, ring: EAF973B, o-ring: EAF980A (Part No: 178623)$530.00

Vane Type Hydraulic Pump Kit - For 3 4 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces CPN981B (Part No: 178627)$500.00

 
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 170217)$14.76

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 114630)$14.20

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 114630)$14.20

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 169771)$7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1 2 inch diameter shaft. Shaft on Yoke is 1-1 2 inches diameter, 8 inches overall length, 7-1 4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 173612)$195.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: 161111)$116.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: 161111)$116.00

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: 180533)$23.00

Hub Assembly - Hub with bushings (3 4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1 4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 180514)$30.80

Hub Assembly - Hub with bushings (3 4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1 4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 180514)$30.80

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5 8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: 182627)$54.00

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 182589)$51.00

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 182592)$89.69

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 182594)$109.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 152690)$83.00

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 182593)$128.00

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 180300)$4.40

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: 107928)$16.50

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: 107928)$16.50

 
Lights
Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: 184496)$42.00

Headlight Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body & bezel, grey enamel finish. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Part No: 105329)$60.00

Headlight Bracket - This round Headlight Bracket will replace the right or left side for models 8N, NAA, Jubilee {1949-1954}. (Part No: 111008)$8.60

Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Part No: 111329)$4.66

Headlight Set, 12 Volt - This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. (Part No: 183740)$130.00

Headlight Set - 6 Volt - This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. Replacement sealed beam bulbs available as p n L4019. (Part No: 183751)$150.00

Knob, Light Switch - Aluminum. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. 10-32 thread. (Part No: 178058)$13.30

Light Assembly, Worklight 6 Volt - This original style Worklight Assembly with on off switch only comes in 6 volt. Includes fender bracket spacer. For tractors: 8N, NAA, Jubilee {1951-1954}. (Part No: 184015)$114.95

Light Switch - For tractor models 8N, 9N, 2N, NAA, Jubilee. Light Switch with fuse. (Part No: 112512)$9.80

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: 114720)$19.69

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)$75.13

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)$75.13

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3 4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Part No: 111228)$14.00

Sealed Beam Bulb, 12 Volt - Red white combination work tail light, 4-1 2 inch diameter. (Part No: 116014)$24.76

Tail Light Assembly, 6 Volt - Light assembly has FOMOCO lens (plastic). For 6 volt tractors made between 1953 to 1954 including NAA & Jubilee, also fits the following models: (Caution; may not fit later models of these tractors): 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 179220)$56.00

Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Part No: 150699)$2.30

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1 8 inches apart). Fits tractors 1953 and newer. (Part No: 178144)$7.95

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket, mounting on top of 9N13470 or 9N13471.) For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4-cylinder), 1801 series (1949 to 1954). (Part No: 125325)$10.95

Tail Light Wire Clip - For 8N, 9N, 2N, NAA and Jubilee to 1954. Rear lamp wire clip. 6 required per tractor. (Part No: 178041)$2.25

Tail Lite, License Light, Clear Glass Lens - This Tail Lite is used with 'Taurus' style tail lights, originally used 1939-1947. It may be found on later tractors if a Taurus lamp was used. Uses Gasket FAA13447A, not included. (Part No: 183031)$10.95

Tail Lite, License Light, Lens Gasket - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. Replaces 40-13460, FAA13447A (Part No: 178109)$5.65

Work Light Bulb, 6V - This is a 6 volt, 4 1 2 inch sealed beam bulb with dimpled lens. It replaces original part number 8N15514 (Part No: 182789)$52.50

Worklight Mounting Socket - Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For Ford tractors: thru 1958 (Part No: 178566)$14.00

 
Miscellaneous
Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. This additional charge will be added to your order. (Part No: B257X)$430.31

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)$110.28

Deluxe Canopy, 3 Bow - This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: 178876)$196.10

Grease Gun - 3-way fill cartridge gun. (Part No: 178294)$40.32

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: 180453)$49.76

Lift Piston - 2-1/2 " O-Ring Kit -
  • For Ford tractor models NAA, 2N, 8N, 9N
  • Replaces Ford OEM number NAA473A, 44R330< li> < li>
  • Compatible with Massey Ferguson tractor models F40, TE20, TEA20, TO20, TO30, TO35 (s n 179304-earlier)
  • Replaces Massey Ferguson OEM number 44R330< li> < li>
  • Compatible with Massey Harris tractor models 50< li>
  • Contains O-Ring 44R330 (116071), Backup Ring NAA473A (112216)< li>
  • For Lft Piston use Item #: 116069< li> < UL> (Part No: 116293)
$8.20

 
Oil System
Filter Breather - Rocker Arm Cover Vent Element. Tractors: NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Part No: 178074)$2.90

Gasket, Oil Pan Drain Plug - Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Part No: 110499)$0.66

Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 189611)$4.41

Oil Filler Cap with Element - Oil filler cap measures 3 1 2 inches diameter. Insert is 1 1 4 inches outside diameter. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5 8 inches, 1 1 2 inch diameter tube and tube is 1 3 8 inches long. Also replaces OEM 8N6766B. (Part No: 121246)$10.00

Oil Filter - Cartridge Type. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965, 1800, 223, 240, 289, 300, 320, 332, 352, 391. Comes with gasket. Measures 4 3 4 inches long, 4 inch diameter with 3 4 inch diameter holes in each end. (Part No: 119300)$13.75

Oil Filter Adapter Kit, Spin On - Converts tractor from element style filter to spin on oil filter. Comes with one filter. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 all from 1953 to 1964 with 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. Replaces ECG6890A, EAA6838A, 87644685, CPN6882A (Part No: 115244)$37.26

Oil Filter Mounting Gasket - This gasket fits behind the Mounting Plate that the filter screws on to. For Spin On Type Oil Filters only. For tractor models 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: 172949)$1.16

Oil Filter, Spin-On - Spin on style oil filter measures with dimensions of 5 13 32 inches in length, 3 11 16 inches O.D. Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10 1969. For use with spin on filter adapter 309825.(40538S)Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Part No: 118399)$14.99

Oil Pan Plug Kit - Gasket, Oil Pan Plug and Screen Assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 108080)$15.00

Oil Pump Drive Shaft, Hex - This Hex Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1954-1964. May also be in a 1952-1953 (Part No: 182495)$29.76

Oil Pump Drive Shaft, Slotted. - This Slot Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1952-1953. May also be in a 1954-1964 if using a slot shaft Oil Pump. (Part No: 166349)$6.00

Oil Pump, Hex Drive - Gear Type For applications with hex drive shafts (Shaft not included). For 134 172 CID Gas engine in: Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 123913)$61.00

Oil Pump Repair Kit - Oil pump repair kit for gear type pump. For tractor models NAA, Jubilee with 134 CID engine. (Part No: 179005)$82.00

Oil Pump, Slotted Drive - Slotted Drive type for 134 CID gas engine in: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 2000 (<1964). Can also replace EAF6621B. (Part No: 123114)$80.00

 
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: 183950)$25.26

Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100244)$6.00

Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100713)$36.60

Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100712)$14.70

Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108135)$54.00

Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100116)$36.70

Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100115)$14.70

Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100114)$6.30

Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100121)$14.70

Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100120)$6.10

Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100723)$6.00

Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 & up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100716)$36.60

Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 & up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100715)$14.70

Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100718)$14.70

Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100717)$6.00

Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100119)$34.00

Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100118)$14.70

Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100253)$6.00

Paint, Vermillion Red, Spray Can - For tractor models (1948-1957). Vermillion Red. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108325)$6.00

Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 156586)$55.00

Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 184741)$63.05

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)$68.39

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)$99.22

 
PTO / Driveline
Bearing, PTO Shaft - This PTO Shaft Bearing is for the original 1 1 8 inch shaft, measures 2 37 16 inches outside diameter, 1 3 16 inch inside diameter, 5 8 inch width. For 8N, 9N, 2N, NAA (1953-1954), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. Also used as a PTO Shifter Support Housing Bearing with 3 and 4 speed transmissions. Used as an upper PTO Countershaft Bearing on 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1630, 1710, 1715, 1725, 1925 Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Part No: 180397)$4.97

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8 inch 6 spline Q.D. tractor yoke. 1-3 8 inch round bore with 1 2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3 4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1 16 inch) bearing diameter x 74.6 mm 2.940 (2-15 16 inch) overall length (43-3 4 inch). Verify length before ordering. (Part No: 180775)$206.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 inch 6 spline Q.D. tractor yoke, 1-3 8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3 4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1 16 inch) bearing diameter x 74.6 mm 2.940 (2-15 16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: 124815)$295.00

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. (Part No: MISC)$0.00

PTO CAP - Fits most Ford Tractors 1939 and later. Replaces part numbers 81809440, 310088, 80310088, 310088F, 0310088F (Part No: 109510)$6.30

PTO CAP - This PTO Cap is for 1-1 8 or 1-3 8 inch PTO shafts. Like original. 3 1 2 inches in length. Inside usable length is 2 7 8 inches. Replaces 2N726, NCA726A, 2N726, NCA726A (Part No: 125614)$26.99

PTO Collar with Pin - Collar with tapered pin fits models: 9N, NAA, Jubilee, 600, 800, 900 (Part No: 172548)$16.50

PTO Housing Gasket - This PTO Housing Gasket is used on many Ford tractor models: Dexta, Super Dexta, NAA, 2N, 8N, 9N, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445A, 515, 530A, 531, 540A, 540B, 545A, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4400, 4500. Replaces: 81801907, 957E4129, 9N4129, C5NN747A. (Part No: 109986)$0.40

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1 8 inch diameter PTO shaft to 1 3 8. It has a 1 1 8 inch female at one end and 1 3 8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Part No: 103169)$57.73

PTO Overide Clutch - Override coupler for 1 1 8 inch female to 1 1 8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Part No: 103167)$71.00

PTO Safety Clutch, 40 HP - 1-3 8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: 183648)$280.00

PTO Shaft - PTO shaft, 1-3 8". Converts standard NAA710B shaft to 1-3 8". For tractor models NAA, Jubilee. (Part No: 182704)$69.30

PTO Shaft - PTO Conversion Assembly For NAA, Jubilee, (converts 1 1 8 inch shaft to 1 3 8 inch). Complete assembly includes: Shaft housing, cover, retaining collar seal, collar with tapered pin, 2 snap rings, front bearing, shaft seal sleeve, seal, and shaft. Assembly ready to bolt on. Length measures about 30 5 16 inch. There is an additional shipping cost for this product of $5 (Part No: 110898)$86.00

PTO Shaft Housing - This PTO Shaft Housing is for models 8N, 9N, 2N, (NAA 1953-1954), Jubilee, NAB. (Part No: 179673)$33.50

PTO Shaft Seal - PTO Shaft Seal. For 8N, 9N, 2N, NAA. Replaces OEM numbers D8NN703AA and 9N703B. (Part No: 111314)$3.76

PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1 8 inch or 1-3 8 inch PTO shaft. 2.45 inch outside diameter, 1 5 8 inch inside diameter, 5 8 inches wide. Replaces OEM numbers : D8NN703AA & D9NN703BA, and 9N703B. (Part No: 111314)$3.76

PTO Shaft Sleeve Bushing, 1-1/8 - For 1-1 8 inch PTO Shafts (NOT 1-3 8 inch) 1.113 inch inside diameter, 1.620 inch outside diameter, 1 inch thick. For tractor models 9N, NAA (1953 to 1954), 2N, 8N, NAB, 600, 700, 800, 900. (Part No: 158215)$6.06

PTO Shaft Sleeve Bushing, 1-3/8 - For 1-3 8 inch PTO Shafts, 1.185 inch inside diameter, 1.620 inch outside diameter. For tractor models 9N, NAA (1953-54), 2N, 8N, NAB, 600, 700, 800, 900. all with 1-3 8 inch PTO shaft. (Part No: 173070)$5.46

PTO Stop - This PTO Stop is used on 3, 4 and 5 speed transmissions. 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900, 501, 601, 701, 801, 901, 2000-4000 4 CYLINDER, 2000, 3000, 3400. (Part No: 113727)$22.00

 
Seats
Pan Seat - This 19 inch wide Fixed Seat For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 2000, 4000, all with 4 Cylinder Engine. This is not a Flip-Over Seat. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Part No: 101352)$34.26

Pan Seat - 19 inch wide Flip-Over Style. Replaces OEM number C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 800, 2000, 4000, 8N, 9N, 2N (4-Cylinder). May come different color than pictured. (Part No: 101239)$61.30

Rubber Bumper - Drivers seat to spring. For tractor models 8N, NAA, NAB. All 1948-1954. Bumper has a 1 Inch Diameter. (Part No: 178106)$3.25

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Part No: 115058)$44.75

Seat Cushion, Blue - For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is blue with a FORD script logo. (Part No: 178635)$39.95

Seat Cushion (Blue and White) - For all Ford Tractors with 21 inch wide Steel Pan Seat. This seat cushion is blue and white with a FORD script logo. (Part No: 179048)$46.50

Seat Cushion (Red) - For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is red with a FORD script logo. (Part No: 178636)$65.00

Seat Cushion (Red and White) - Seat Cushion. Deluxe with 2 inches of foam padding. For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is red and white with a FORD script logo. (Part No: 180739)$34.00

Seat Hinge Pin - Exact of original. For tractor models 8N, NAA, Jubilee all from 1948 to 1954. (Part No: 178110)$6.05

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3 4 inches deep). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: 180784)$116.00

Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 with 4 cylinder engine. 2 3 8 inches wide. May require modification of bolt holes for an original hinge. (Part No: 101241)$46.50

Seat Spring To Seat Hinge Bolt Kit - This Seat Spring to Seat Hinge Bolt Kit is used on Ford 8N and NAA Jubilee Tractors. (Part No: 183383)$3.95

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. This additional charge will be added to your order. (Part No: 155584)$144.00

Seat, Universal - BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $30 additional shipping per seat due to size and weight. This additional charge will be added to your order. (Part No: 101374)$97.00

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: 183807)$126.00

Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before purchasing. Weight 33 pounds. (Part No: 183989)$186.10

Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180782)$86.00

Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180783)$86.00

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Part No: 101353)$40.00

Tie-On Seat Cover - Tie-On Seat Cover. 19 inch Tie-On Cover with White Script Ford Logo. Fits models: NAA, 2N, 8N, 9N, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 4000. (Part No: 178809)$37.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)$182.49

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. This additional charge will be added to your order. (Part No: 101375)$97.00

 
Sheet Metal / Body Parts
Air Cleaner Door - Air Cleaner Louvered Door restoration quality. For NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 units before 1965. Replaces NAA-9661-B. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 158443)$20.76

Battery Box - For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953 to 1964. Replaces NCA 10432A. Comes with a rough coat of primer. Use with (SOLD SEPERATELY) battery hold down NCA10718A and hold down Bolts 8N10728WN and NCA10728WN. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104045)$38.76

Battery Cover, Restoration Quality - Battery cover with access door and decals, also with round cable opening. Exact of original (powder coated red). Fits Jubilee, NAA, NAB, 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 950, 960 all with 6 volt batteries and round battery cable. Replaces NAA5162A, NCA10718A. (Part No: 178411)$54.95

Bumper - This is a new aftermarket style Bumper. It has a trailer hitch. Comes primer coated. Used on NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (1962-1964), 3000, 4000SU, 2600, 3600, 4100, 4600SU, 2610, 3610, 4110, 4610SU. Additional $20.00 shipping due to weight. This additional charge will be added to your order. (Part No: 113512)$104.50

Bumper - For NAA, Jubilee, 600 and 800 Series (thru 1964), 2000 and 3000 (1965 and up), 2600, 3600, 4600 (1975 and up), 8N, 9N, 2N - has 4 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Axle mount with mounting brackets. This is an aftermarket item. Parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. $22 additional shipping will be added to your shipping total for this part due to weight. (Part No: 113512)$104.50

Bumper Bolt Kit -
  • For Ford tractor models NAA, 600, 601, 800, 801, 2000, 2031, 2130, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4121, 4131, 4140, 4200 < li>
  • Compatible with Massey Ferguson tractor models TO35, 35< li>
  • Replaces OEM number 351505S8, 33806S34, 354369S8< li>
  • Used on bumpers 104060, 113401, 113512, 113511< li>
  • Zinc Plated< li>
  • Includes 2 Bolts, Flat Washers, Lock Washers, Nuts< li>
  • 5-8 x 18 x 4"< li> < UL> (Part No: 126104)
$11.40

Bumper - Heavy Duty - For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 2000, (4000SU with I-Beam Front Bumper). Additional $15 shipping due to weight. This additional charge will be added to your order. Welded, not riveted. Slightly different than original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104060)$175.00

Bumper Kit - This grill to side panel bumper kit is used on many 4 cylinder Ford models: Jubilee, NAA, 2000, 2030, 2031, 600, 601 and 800 from 1953 to 1962. Replaces: NAA88227B 88227-K. (Part No: 178197)$5.56

Bumpers 6 Per PKG - Bumper, Hood Tip Center Panel Rubber Bumper Kit {6 per pkg}. For tractors: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1953-1957}. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 178019)$6.26

Bumper, Side Panel To Hood - This pad fits between the top of the front side panels and the hood. Used on Ford Tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. It is glued in place. Replaces original part number NAA88131B. (Part No: 178076)$5.50

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: 165963)$41.19

Fender - For tractor models 8N, 9N, 2N, NAA, Jubilee. Rear Fender, dished type, with mounting bracket. Additional $140.00 per fender shipping charge will be added due to the size and weight of this item. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. These are sold individually. Photo is for perspective. (Part No: 104069)$111.00

Fender - Fender Panel (no longer supplied by OEM). Price is for 1 panel. Panel comes primed. To install, remove fasteners from old panel, drill new holes and bolt new panel in place. Panel can be shipped UPS. Add additional $30 shipping per fender due to weight. This additional charge will be added to your order. Panel, less mounting brackets. For 8N, 9N, 2N (1939 to 1952) and row crop high clearance models 700 and 900 (1957-1962), fits right side or left side. (Part No: 100026)$97.00

Fender Bolt Kit -
  • For Ford tractor models NAA (when not equipped with sway bar brackets or loader brackets), 2N, 8N, 9N, 501, 540, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (4 cylinder), 2031, 2110, 2111, 2120, 2130, 2131, 4000 (4 cylinder), 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030 < li>
  • Compatible with Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 30, 35, 40, 50 (when not equipped with sway bar brackets or loader brackets), 65, 135, 150, 230, 240, 245< li>
  • Compatible with Massey Ferguson Construction & industrial models 20, 30, 50 (when not equipped with sway bar brackets or loader brackets), 65, 202, 203, 204, 205, 2135, 2200 < li>
  • Compatible with Massey Harris tractor models 50 (when not equipped with sway bar brackets or loader brackets) < li>
  • Compatible with Oliver tractor models Super 55, 550 (when not equipped with sway bar brackets or loader brackets) < li>
  • Compatible with White tractor models 2-44 (when not equipped with sway bar brackets or loader brackets)< li>
  • Replaces OEM number 353648X14, 364918X14, 375651S8, 3541315S36, 372457S36, 900157< li>
  • Kit includes 4 (6-1 2") carriage bolts (5 8" NC), nuts, lock washers< li>
  • Use with fenders 100026, 104069, 104070, 104072, 125421< li>
  • For OEM Quality use Item #: 183747< li> < UL> (Part No: 154411)
$17.00

Fender Bolt Kit 4 Per PKG - Bolt Kit, Rear Fender Bracket to Axle Housing, bolts 6 1 4 inch x 5 8 inch, nut and washer kit {set of 4}. Verify your bolt size. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900, and some early 2000 and 4000. (Part No: 183747)$28.76

Fender - Scripted Style -
  • For Ford tractor models NAA, 8N< li>
  • Replaces Ford OEM number 8N16312< li>
  • Raised "Ford" script< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • Non-Original Bracket< li>
  • For fender skin only use Item #: 153273< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 104071)
$155.00

Fender With FORD Script - This Fender Panel has the raised "FORD" script. Panel comes primed. To install, remove fasteners from old panel and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 8N, 9N, 2N, 700, 900, NAA, Jubilee(1939 to 1954), fits right side or left side. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces: 8N16312C (Part No: 185187)$245.00

Front Grill - This is an aftermarket metal replacement. It is close but not exactly like the original. The hand crank hole may come round or oblong shaped. For 4 cylinder Ford tractors 1953-1964. Replaces NCA8200A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104067)$198.07

Front Grille - Fiberglass -
  • For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 820, 840, 850, 860, 2000, 2031< li>
  • Compatible with Ford Construction & industrial models 2030< li>
  • Replaces Ford OEM number NCA8200A< li>
  • Made of Fiberglass< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 104066)
$150.00

Grill Mounting Stud - For NAA, Jubilee. 2 Used per tractor. (Part No: 178114)$4.95

Hood Emblem Housing - For tractor models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. Housing holds emblem and connects side pieces of hood. **WARNING** Fit to tractor before painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. This is the same as NCA16613A but not nearly as finished. This part will likely require fill work. NCA16613A is a more finished product. (Part No: 126588)$114.50

Hood Emblem Housing - This is the same part as 311319 but of higher quality metal work. Less work will be required with this piece when doing a restoration. Fit to tractor before painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 184022)$129.95

Hood Latch Assembly - This Hood Latch Assembly is used with Top Hood Door Latch (not included) part number NAA16628C. Two are used per hood. It is used on Ford Tractors NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. Replaces original part number NAA16645C. (Part No: 178160)$35.00

Hood Latch Spring - For tractor models Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 with 4 cylinder gas engines). (Part No: 178099)$18.50

Hood Screw Kit, 6 Piece - Ford Hood Screw Kit, 6 Piece. Used to secures rear of hood to dash board. 5 16 inch x 24 Phillips head w pilot. Used on Ford 1953 to 1964 4 cylinder tractors. (Part No: 125719)$6.70

License Plate Bracket - This License Plate Bracket is used on tractors with Duolamp Tail Lights. Used on Ford Tractor Models 9N, 2N, 8N, NAA and Jubilee, 1939-1954. (Part No: 183002)$13.50

Pilot Punch Set - Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16 and 1 2. (Part No: 186563)$146.94

Running Board Bracket - Front - For tractor models 8N, NAA, 600, 601, 700, 800, 801, 900, 2000, 4000. All WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket right or left side. Price is for EACH bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 152392)$23.80

Running Board Left Hand - This NAA Jubilee running board features a tool box just like the original. It is stamped steel construction. Has square bolt holes in the tread plate. The running board is powder coated with a durable red finish. This Running Board will also fit an 8N although it was not original equipment on that model. Comes with Mounting Hardware. Replace original part number NAA16451A. (Part No: 185612)$202.50

Running Board to Bracket Bolt Kit -
  • For Ford tractor models NAA, 8N< li>
  • Replaces Ford OEM number 355471, 355471S8< li>
  • Bolt Kit for Running Board to Bracket< li>
  • 5 16" - 24 x 3 4" Elevator Bolts< li>
  • Kit Includes: 8 Bolts, 8 Washers, and 8 Nuts< li> < UL> (Part No: 178016)
$15.76

Side Panel, Left - Front Left Hand Lower Side Panel Assembly. For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C3NN16653B, NCA16653A. (Part No: 104058)$120.00

Side Panel - RH - Front Right Hand Lower Side Panel Assembly. For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces NCA16652A, C3NN16652B. (Part No: 104057)$120.00

Toolbox - For tractor models: NAA, Jubilee. (Part No: 155832)$82.99

Tool Box -
  • For Ford tractor models Dexta, FW20, FW30, FW40, NAA, Super Dexta, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 256V, 611, 621, 631, 651, 850, 851, 861, 901, 941, 950, 951, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830, 4910, 5000, 5010, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 5910, 6000, 6010, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7400, 7410, 7530, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9030, 9200, 9600, 9700< li>
  • Compatible with Ford Construction & industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 345, 345C, 345D, 420, 445, 445C, 445D, 450, 455, 515, 530A, 531, 532, 535, 540, 541, 545, 545C, 545D, 550, 555, 575, 655, 675, 755, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3550, 4010, 4040, 4140, 5500, 5550, 6500
  • Replaces Ford OEM number C5NN17005F11M, 81844199, 83935318, C5NN17005F, C5NN17005FFD, D3NN17005B< li> < li>
  • Compatible with New Holland tractor models TC18, TC25, TC27, TC29, TC30, TC33, TC35, TC40, TC45, TG210, TG230, TG255, TG285, TJ275, TJ325, TJ375, TJ425, TJ450, TJ500, TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, TS90, TS100, TS110, 1530, 1630, 1725, 1925, 4835, 5635, 7010, 7635, 8010, 8160, 8260, 8360, 8560< li>
  • Fender Mount, Blue Tool Box< li>
  • 16" x 4" x 4"< li>
  • Comes primered (color may vary). Prior to painting check fitment< li> < UL> (Part No: 112634)
$22.00

Top Hood Door Latch - The new Top Hood Door Latch is used in Ford Tractors from 1953-1964. Models: NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1800, 1801. It is used with NAA16654C latch assembly. It replaces original part number NAA16628C. (Part No: 179284)$9.99

 
Steering
Axle Hardware Kit 4 PCS. - Bolt Kit, front axle bolt, nut and washer. Holds right and left axles to center axle. Bolts are 3 1 2 inches and 5 8x18. Nuts have 1 1 6 head. For tractors: 8N, 9N, 2N {1939-1952}. For 600, 700, 800, 900, NAA. (Part No: 178012)$14.95

Axle Pin Support Bushing - This Axle Pin Bushing for models 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, NAA, Jubilee. Front Axle Bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778 inch inside diameter, 1.913 inch outside diameter, 1.5 inch length (not for heavy, industrial or grove axles). (Part No: 110832)$7.46

Ball Bearing, Steering Gear - 3 8 inch ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee.22 required per gear box (Part No: 167684)$0.26

Bolt, Radius Rod to Front Axle - Length is 5-1 2 inches, 5 8 inch-18 thread. Head outside diameter is 7 8 inches. Fits the following tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000 (up to 1964), 4000 (up to 1964). Two used per tractor. Sold individually. Replaces 957F3415A, 86531713, NAA3415BGV, NAA3415B. (Part No: 152353)$9.75

Differential Pinion Bearing Cup -
  • For Ford tractor models Dexta (1957-1964), NAA (1953-1954), 2N (1939-1952), 8N (1939-1952), 9N (1939-1952), 600 (With 4 Speed Transmission, s n 54166-later, 1958-1962), 601 (With 4 Speed Transmission, s n 54166-later, 1958-1962), 2000 (1965-later), 2120 (With 4 Speed Transmission, s n 54166-later, 1958-1962), 3000 (1965-later), 4110 (1965-later)< li>
  • Compatible with Ford Construction & industrial models A64< li>
  • Replaces Ford OEM number BB4422, 3920< li> < UL> (Part No: 109577)
$13.70

Drag Link Assembly -
  • For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000, 2031, 2130, 2131, 4000, 4031, 4120, 4121, 4131, 4131 (All 4 Cylinder Without Power Steering 1953-64)< li>
  • Replaces Ford OEM number 8N3287, 957E3287, C5NN3N295B, NAA3270A, NAA3290A, NAA3307B, NAA33271A, 87048406, NAA33315A< li>
  • Length Adjustable 42-3 8" to 46-1 2" Center To Center Tie Rod Studs. < li> < UL> (Part No: 125344)
$123.00

Drag Link Assembly, LH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Left Hand. (Part No: 182955)$84.95

Drag Link Assembly, RH OEM - This Drag Link Assembly is manufactured to look exactly like the original on Manual Steering Ford Tractors 1953-1964. Used on NAA, 600 series, 601 series, 800 series, 801 series, 2000 and 4000. All pre 1965. Right Side. (Part No: 182956)$84.95

Drag Link Clamp -
  • For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2100, 2110, 2120, 2130, 2131, 2300, 2310, 2600, 2610, 2910, 3000, 3100, 3110, 3120, 3300, 3310, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 230A, 231, 233, 333, 530, 531< li>
  • Replaces Ford OEM number 957E3287, 8N3287< li> < UL> (Part No: 104589)
$6.00

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Part No: 178150)$16.50

Drag Link End, Front, Greasable - A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1 1962 to 12 1964), 4000 (1 1962 to 12 1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1 16 of an inch longer. (Part No: 100671)$10.40

Drag Link End, Front, Non-Greasable - This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1 1962 to 12 1964), 4000 (1 1962 to 12 1964). Price shown is for each, sold only in multiples of 2 items. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1 16 of an inch longer. (Part No: 100671)$10.40

Drag Link End, Rear - Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Part No: 100670)$11.00

Drag Link Tube - RH - Drag Link Tube is right hand. Tube measures 36.125 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11 16 inch 18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 178571)$38.26

Front Axle Assembly with Bushing - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000 (with Manual 7-57 PS 55), 4000 (with Manual 7-57 PS 55), Dexta, Super Dexta. This axle is for tractor models that have a standard front end (NOT for adjustable axle). Not warrantied for use with front end loaders. Replaces NAA3010B2. Add $15.00 additional shipping due to weight. This additional charge will be added to your order. (Part No: 112019)$161.00

Front Axle Support Pin Spacer - 1.783 inch inside diameter, 2.023 inch outside diameter, .758 inch length. For tractor models 8N, NAA, Jubilee (1948-1954). (Part No: 178040)$7.40

Pin Front Axle - Pin, front axle unthreaded. Outside diameter 1.743 inches, inside diameter 1.310 inches, length 4 inches. For Jubilee, NAA, 500, 600, 700, 800, 6000. All 1954 through 1955 using unthreaded pin), (6000 with all purpose wide front axle 1 1963 to 12 1966). Replaces NAA3126B, 2N3126D, 86507106. (Part No: 112069)$27.50

Pitman Arm (LH/RH) - Steering Gear Pitman Arm for tractor models 8N (serial number 216989 and up 1949-1952), NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. Replaces NCA3590A. Measures 10 inches in length. Big end is splined at 1.06 inside diameter. Small end is smooth at .688 inches. (Part No: 116149)$71.00

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1 8 inch keyway, 0.9715 inch total width for 1 2 inch belt. (Part No: 164438)$48.76

Radius Rod, Ball Socket - For tractor models: Jubilee, NAA, 2000 3 cylinder, 2000 4 cylinder, 600, 601, 800, 801, 1811, 1821, 1841, 1871, 1881, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2600V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 4000 3 cylinder, 4000 4 cylinder, 4030, 4100, 4110, 4120, 4121, 4130, 4140, 4410, 4600SU, 8N, 9N, 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 3400, Dexta, Super Dexta. Replaces: 9N3442, E0NN3N442BA, C5NN3N442C, C5NN3N442A, GL139. (Part No: 115083)$15.92

Radius Rod Pin -
  • For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 501, 540, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3430, 3500, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830< li>
  • Compatible with Ford Construction & industrial models 230A, 231, 233, 234, 333, 334, 335, 530< li>
  • Replaces Ford OEM number NAA3415B, 86531713, 957E3415A< li> < UL> (Part No: 140634)
$4.66

Radius Rod, Socket Cap - Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Part No: 108088)$13.20

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1. Used with optional Monroe seat (Part No: 109602)$3.56

Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Part No: 124153)$5.95

Shaft, Steering L/H Early -
  • For Ford tractor models NAA (, NAB, 1 53-12 54), 8N (1 47-12 52), 541 (1 59-12 64), 600 (1 55-12 57), 601 (1 58-12 62), 611 (1 59-12 64), 620 (1 59-12 64), 621 (1 58-12 64), 630 (1 55-12 57), 631 (1 58-12 64), 640 (1 55-12 57), 641 (1 58-12 64), 650 (1 55-12 57), 651 (1 58-12 64), 660 (1 55-12 57), 661 (1 58-12 64), 671 (1 59-12 64), 681 (1 59-12 64), 800 (1 55-12 57), 811 (1 59-12 64), 820 (1 55-12 57), 821 (1 58-12 64), 840 (1 55-12 57), 841 (1 58-12 64), 850 (1 55-12 64), 851 (1 55-12 64), 860 (1 55-12 57), 861 (1 58-12 64), 871 (1 59-12 64), 881 (1 59-12 64), 2000 (1 62-12 64), 2031 (1 60-12 62), 2110 (TR, 1 63-12 64), 2111 (1 63-12 64), 2120 (1 63-12 64), 2130 (1 63-12 64), 2131 (1 63-12 64), 4000 (1 62-12 64), 4030 (1 61-12 62), 4110 (TR, 1 63-12 64), 4120 (1 63-12 64), 4121 (1 63-12 64), 4130 (3 63-12 64), 4131 (1 60-12 62), 4131 (3 63-12 64)< li>
  • Compatible with Ford Construction & industrial models 1801 (1 58-12 60), 1811 (1 59-12 60), 1821 (1 58-12 60), 1841 (1 59-12 60), 1871 (1 59-12 60), 1881 (1 59-12 60), 2030 (1 63-12 64), 4040 (1 61-12 62), 4140 (3 63-12 64)< li>
  • Replaces Ford OEM number 8N3527B< li> < UL> (Part No: 165778)
$197.00

Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Part No: 100617)$3.00

Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3 4 inches with notch on outside and 1 4 inch keyway on inside. Used with Steering Arm part number 310799, bushing part number 2N3109, wheel hub part number 86511582, thrust bearing part number C0NN3123B, wheel bearing kit part number CBPN1200A. (Part No: 100615)$56.00

Spindle, Front - Left Hand Spindle. For 8N, NAA, Jubilee. REPLACES F3NN3106AA. Spindle shaft is 10 3 4 inches with notch on outside and 1 4 inch keyway on inside. Used with Steering Arm part number 310799, bushing part number 2N3109, wheel hub part number 86511582, thrust bearing part number C0NN3123B, wheel bearing kit part number CBPN1200A. (Part No: 100616)$56.00

Spindle / King Pin Repair Kit - For 8N, 9N, 2N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: upper spindle seal C5NN3125A, spindle top bushing 2N3109, spindle bottom bushing 2N3109, and thrust bearing C0NN3123B. (Part No: 180785)$26.76

Spindle Nut - Fits on Front Spindles. Castle Nut 3 4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Part No: 156038)$1.36

Spindle Thrust Bearing - Thrust Bearing for Spindle measures 1.345 inch inside diameter, 2.2 inch outside diameter, and width of .622 inch. For tractor models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Part No: 100623)$4.66

Steering Arm - Spindle steering arm, for manual and power steering models: 2000, 230, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610SU, 530, 530A, 531, 600, 601, 800, 801, 8N, Dexta, Jubilee, NAA, Super Dexta. Steering Arm replaces 310799, 81811668, 8N3130B, 957E3130 (Part No: 104731)$33.00

Steering Column Bearing Spring - This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 178087)$3.25

Steering Column Seal - This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). Replaces D8NN3N898AA, 83911611, 81803114 (Part No: 124493)$3.56

Steering Column Spring Seat - For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Part No: 179692)$3.95

Steering Gear, Aftermarket Box - This Double Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: 181987)$140.00

Steering Gear, Aftermarket Box - This Single Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: 184515)$136.00

Steering Gear Assembly - Complete manual steering gear assembly fits: NAA, Jubilee. Comes with drop arms. Replaces DC-349N75 (Part No: 158460)$750.00

Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: 179431)$153.00

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Part No: 124504)$1.95

Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. Replaces the following OEM numbers: 1023837M1, 180560M1, 180562X1, 1A6763A, 1A-6763-A, 1AS6822, 1AS-6822, 1E-6757-A, 1E6757A, 1E6764, 1E-6764, 1E6784, 1E-6784, 1L6774, 1L-6774, 1L6784, 1L-6784, 22-456X, 251294, 33544, 33545, 34690S, 34692S, 34813S, 353428X1, 353436X1, 353440X1, 44730S, 830628M91, 833455M1, 87073S91, 87073S94, 8N33544A, 8N33544B, 8N33544C, 8N33544D, 8N33545, 8N3585, 8N3586, 8N3591, 915086, 920089, 9636445, D5UZ3591A (Part No: 178090)$18.76

Steering Sector, Left Hand - Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Part No: 114749)$192.00

Steering Sector, Right Hand - Sector (Double Gear) 7 tooth. Replaces OEM numbers 251294, C3NN3527A. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. (Part No: 111898)$196.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 124494)$1.56

Steering Shaft Bearing -
  • For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2000 (1964-earlier), 2031, 2111, 2120, 2130, 2131, 4000 (1964-earlier), 4031, 4120, 4121, 4130, 4140< li>
  • Replaces Ford OEM number 8N3571< li>
  • Bearing Only< li>
  • For Complete Bearing - Cup And Cone use Item #: 111857< li> < UL> (Part No: 179748)
$14.30

Steering Shaft Bearing - For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 111857)$13.00

Steering Shaft Bearing and Cup Assembly - 1-3 4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for one set. Two required for the listed models. Replaces 8N3571 and 8N3552. (Part No: 111857)$13.00

Steering Shaft Bearing And Cup Assembly - Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft top and bottom. (Part No: 178073)$21.26

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A, 310875, B7NN3517A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Part No: 124501)$34.76

Steering Shaft Bearing Cup - This Steering Shaft Bearing cup is used with Bearing Cone part number 8N3571-OE and measures 1.75 inches outside diameter. For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 173338)$10.90

Steering Shaft Gear Thrust Bearing Retainer - For tractor models 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12 1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. (Part No: 124154)$3.20

Steering Shaft & Nut Assembly - For tractor models NAA & Jubilee with Manual Steering. 22 1 2" long. (Part No: 161864)$139.00

Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11 16 (tapered) 36 splined hub and comes with a cap. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Part No: 101425)$31.25

Steering Wheel - Steering Wheel OEM Style, 17-1 2 inch diameter, 11 16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA. (R2091) (Part No: 101421)$25.76

Steering Wheel Dome Nut Washer - With beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. Replaces 356515S, 356515S36 (Part No: 126719)$5.86

Steering Wheel Nut - Black -
  • For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040< li>
  • Replaces Ford OEM number 359295S7< li>
  • Black Finish< li>
  • 11 16" - 20 Threads< li> < UL> (Part No: 111727)
$6.40

Steering Wheel Nut, Black - Nut, Steering Wheel ACORN style. 11 16 inch-20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack)$6.40

Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn Style Nut, 11 16 inch. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 176956)$7.06

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Part No: 185079)$106.70

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13 16 inches x 5 8 inch x 5 8 inch, 1 15 16 inches x 3 4 inch, 3 4 inch, and 1 3 8 inches x 1 inch x 1 2 inch. (Part No: 183427)$13.00

 
Tools
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: 183798)$15.60

Chain Binder - 1 4 inch chain binder, 2600 pound load limit. (Part No: 178272)$26.26

Chain Binder - 3 8 inch chain binder, 5400 pound load limit. Use with either 5 16 inch or 3 8 inch chain. (Part No: 178290)$33.00

Chain Binder - 3 8 inch chain binder, 5400 pound load limit. Use with either 5 16 inch or 3 8 inch chain. (Part No: 178290)$33.00

Chain Binder - 1 2 inch chain binder, 9200 pound load limit. Use with either 3 8 inch or 1 2 inch chain. (Part No: 178266)$48.50

Chain Binder - 1 2 inch chain binder, 9200 pound load limit. Use with either 3 8 inch or 1 2 inch chain. (Part No: 178266)$48.50

Clutch Alignment Tool - .655" x 15 Spline -
  • For Ford tractor models NAA, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 840, 850, 851, 900, 901, 941, 950, 951, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 5010< li>
  • Compatible with Ford Construction & industrial models 1801, 1821, 1841< li>
  • Tool For 1" 15 Spline Disc Using .655" ID Pilot Bearing< li> < UL> (Part No: 119884)
$6.96

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: 182666)$52.00

Eyebolt, Clutch -
  • For Ford tractor models NAA, 8N, 600, 700, 800, 900< li>
  • Replaces Ford OEM number 355584S8< li>
  • 7 16" x 20 x 2.68< li> < UL> (Part No: 166065)
$11.66

Grease Gun - Grease Gun. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: 182665)$70.00

Grease Gun - Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: 157100)$20.00

Grease Gun - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: 178294)$40.32

Grease Gun CLAMP - Clamp holds all 2-1 4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: 178308)$9.80

Grease Gun PowerLuber 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)$134.19

Grease Gun PowerLuber 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)$288.95

Grease Gun PowerLuber 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)$403.25

Grease Hose 18 Inch - 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: 157114)$7.86

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: 180261)$275.00

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 185142)$153.00

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 179619)$153.00

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004)$110.33

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 179618)$197.00

 
Wheels
11" x 28" Spin Out Rear Rim, Off-White -
  • For Ford tractor models NAA, 541, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131< li>
  • Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140< li>
  • Replaces Ford OEM number NDB1020B< li>
  • Width: 11"< li>
  • Diameter: 28"< li>
  • Type: Spin Out< li>
  • Rim Color: Off-White< li> < UL> (Part No: 158482)
$870.00

4" X 19" Front Rim, 6 Bolt -
  • For Ford tractor models NAA, 2N, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 681, 700, 740, 771, 800, 821, 851, 861, 871, 901, 950, 960, 981, 2000, 2031, 2111, 2120, 2131, 4000, 4031, 4110, 4120, 4131< li>
  • Replaces Ford OEM number C5NN1015A< li>
  • Width: 4"< li>
  • Diameter: 19"< li>
  • Bolts: 6< li>
  • Bolt Hole Diameter: 6"< li>
  • Pilot Hole: 4.625"< li> < UL> (Part No: 174109)
$83.38

Bolt. Front Wheel - This bolt is the Hub to Rim Bolt. Measures 1 5 8 inches x 20 UNF threads, .6 inch shoulder diameter, 1.346 inch usable length, 1.545 inch overall length. For 2000, 2N, 3000, 4000, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Replaces 81816078, C5NN1107B, C5NN1107D, C5NN1107E, 78-1107 and 781107. Uses nut part number C5NN1012B. (Part No: 154744)$3.26

Front Rim - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Additional $15 shipping due to size and weight. This additional charge will be added to your order. Replaces: 81812445, 83900158, D2NN1007L, 82006575, 81802273, 84190192, 87389515, 83958545, 83960326, 83988088, 87763496, C5NN1007B, 81821919, 8N1015C, 8N1015D, 957E1015D, E9NN1007SA, E6NN1007AA, C9NN1007B, E6NN1007LA. For the following: 2000, 2100, 2110, 2120, 2150, 230, 2300, 231, 2310, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 334, 335, 3400, 3430, 3550, 3600, 3910, 4000, 4100, 4400, 4610, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Dexta, Jubilee, NAA, Super Dexta (Part No: 103756)$55.00

Front Rim - Front rim 3 inch x 19 inch for 4.00 inch x 19 inch tire. 6-Lug, 4 5 8 inch pilot hole, 6 inch bolt circle. For tractor models 8N, NAA, Jubilee, 600, 800. Add $15 additional shipping due to size and weight. This additional charge will be added to your order. Replaces: 8N1015A, C5NN1015A. (Part No: 103760)$76.30

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. (Part No: 103768)$118.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Part No: 116854)$65.00

Front Wheel Bearing Kit - For model 9N, 2N 1939-1947, 8N 1948-1952, NAA, Jubilee thru 1954. Kit includes inner Cone (86609936), inner cup (86609935), outer cone (86576860), outer cup (86577043), seal (NCA1190A). (Part No: 100651)$23.76

Front Wheel Cap - For 8N, 9N, 2N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 all 1939 to 1964. Front Wheel Cap. (Part No: 183735)$10.95

Front Wheel Hub - Front Wheel Hub comes with Studs. For 8N, NAA. Uses CBPN1200A wheel bearing kit. Will also work with 9N and 2N tractors when retrofitted with 6 lug hub & rim. Replaces: 8N1104, NCA1104C, D5NN1104A (Part No: 184817)$66.88

Front Wheel Hub without Studs -
  • For Ford tractor models NAA, 8N, 501 (s n 137818-earlier), 541 (s n 137818-earlier), 600 (s n 137818-earlier), 601 (s n 137818-earlier), 611 (s n 137818-earlier), 620 (s n 137818-earlier), 621 (s n 137818-earlier), 630 (s n 137818-earlier), 631 (s n 137818-earlier), 640 (s n 137818-earlier), 641 (s n 137818-earlier), 650 (s n 137818-earlier), 651 (s n 137818-earlier), 660 (s n 137818-earlier), 661 (s n 137818-earlier), 671 (s n 137818-earlier), 681 (s n 137818-earlier), 700 (s n 137818-earlier), 701 (s n 137818-earlier), 740 (s n 137818-earlier), 741 (s n 137818-earlier), 771 (s n 137818-earlier), 800 (s n 137818-earlier), 801 (s n 137818-earlier), 811 (s n 137818-earlier), 820 (s n 137818-earlier), 821 (s n 137818-earlier), 840 (s n 137818-earlier), 841 (s n 137818-earlier), 850 (s n 137818-earlier), 851 (s n 137818-earlier), 860 (s n 137818-earlier), 861 (s n 137818-earlier), 871 (s n 137818-earlier), 881 (s n 137818-earlier), 900 (s n 137818-earlier), 901 (s n 137818-earlier), 941 (s n 137818-earlier), 950 (s n 137818-earlier), 951 (s n 137818-earlier), 960 (s n 137818-earlier), 961 (s n 137818-earlier), 971 (s n 137818-earlier), 981 (s n 137818-earlier), 2000 (s n 137818-earlier), 2031 (s n 137818-earlier), 2110 (s n 137818-earlier), 2111 (s n 137818-earlier), 2120 (s n 137818-earlier), 2131 (s n 137818-earlier), 4000 (s n 137818-earlier), 4031 (s n 137818-earlier), 4110 (s n 137818-earlier), 4120 (s n 137818-earlier), 4131 (s n 137818-earlier)< li>
  • Replaces Ford OEM number 86511582, 8N1104, D5NN1104A, NCA1104C< li>
  • Use 111238 if smaller inner race is needed< li> < UL> (Part No: 104754)
$58.00

Front Wheel Nut - These Front Wheel Nuts are 1 2 inch-20. Fits 8N (late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000. Replaces C5NN1012B, E1ADKN1012. (Part No: 108607)$0.76

Front Wheel Rim 5.50 x 16 - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Part No: 116854)$65.00

Front Wheel Stud Bolt - Front Wheel Stud Bolt measures 1 2 inch X 2 inch. WITHOUT nuts. Note: nuts are available by ordering part number C5NN1012B. Fits 8N (late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 108606)$2.56

Rear Rim - This rim is 9 inch x 28 inch wide base demountable rim with 6 loop clamps. Loops are designed for 5 8 inch bolts. Fits tire size 11.2 inch x 28 inch. Add $25.00 additional shipping due to weight. This additional charge will be added to your order. (Part No: 103780)$120.00

Rear Rim - This rear rim is six loop, 10 inch x 28 inch. Loops are designed for 5 8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 900, 2000, 4000, Dexta, Super Dexta and others by size. Replaces NCA1020B. Additional $42.50 shipping due to weight. This additional charge will be added to your order. Verify size before ordering. (Part No: 103719)$136.00

Rear Rim - This Six loop rim is 11 inch x 28 inch. Loops are designed for 5 8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900. Additional $25.00 shipping due to weight. This additional charge will be added to your order. (Part No: 104209)$144.00

Rear Rim - This Six loop rim is 12 inch x 28 inch. Loops are designed for 5 8 inch bolts. For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900, 2000, 3000, 4000. Additional $25.00 shipping due to weight. This additional charge will be added to your order. Replaces D4NN1050B, D9NN1050EA, 31319712G, 99A502 (Part No: 103720)$152.00

Rear Wheel Center - This disc is used on multiple Ford models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5 16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces Ford OEM numbers D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B. Additional $35 shipping due to weight. This additional charge will be added to your order. (Part No: 149804)$209.00

Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.516 inch outside diameter, 0.78 inch inside diameter, 0.089 inch thick. It replaces original part numbers C5NN1N195A, 81811561, 9N1195. (Part No: 164443)$1.26

TIRE GAUGE - Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: 184436)$13.50

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braided flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: 172349)$40.26

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 118299)$14.30

Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. This additional charge will be added to your order. (Part No: 650X16)$105.53

Tire Tube - For 5.50 inch , 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: 118295)$18.75

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: 178959)$51.00

Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: 178957)$69.00

Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: 158249)$63.25

Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: 178895)$109.00

Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: 184736)$69.88

Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. (Part No: 183819)$79.42

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Part No: 124526)$14.76

Wheel Clamp Lock Nut -
  • For Ford tractor models NAA, 8N< li>
  • 1-1 4" - 18 UNF thread< li>
  • No re-threading necessary on worn shafts< li> < UL> (Part No: 150684)
$46.00

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. Add $10 additional shipping due to size and weight. This additional charge will be added to your order. (Part No: 180445)$94.00

Wheel Nut & and Stud Pack (6) -
  • For Ford tractor models Dexta, NAA, Super Dexta, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2300, 2600, 2610, 2810, 2910, 3000, 3055, 3230, 3300, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 4630, 5110, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210< li>
  • Replaces OEM number 81816580, 81815739< li>
  • Sold in Packs of 6< li> < UL> (Part No: 177012)
$15.50

Wheel Stud, Rear - 5 8 inch-18 thread, .690 inch outside diameter on serration, length (without head) is 1- 15 16 inches. For tractor models: 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, (4000 1958-1964). (Part No: 111218)$4.56






PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy