Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
Search Button
All Manufacturers
Select a Manufacturer
All Models
Select a Model
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums
John Deere A & B Parts
Master Parts List
[Show Pictures]
 
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5 8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1 2 inches x 9-1 2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: 182644)$367.64
 
Brakes
Brake Gasket -
  • For John Deere tractor models B (s n 232468-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2743R< li> < UL> (Part No: 154791)
$7.30
Brake Housing Gasket. - Fits John Deere - A (sn: 584000 & up), [AO, AR (sn: 272000 & up)], [60, 620, 630 (No Hi-Crop)]; Replaces: A3789R (Part No: 178585)$7.56
Brake Linings With Rivets - For 60, 620 HI-CROP, 620 ORCHARD, 630 HI-CROP, 630 ORCHARD, 70 HI-CROP, 720 HI-CROP, 730 HI-CROP, A AFTER SN# 410000, AO AND AR AFTER SN# 250000, G, GH, GN, GW. Brake Linings with rivets. Includes (4) linings and 32 rivets. (Part No: 105603)$26.76
Brake Return Spring - For tractor models 50, B, BO, BR. (Part No: 125769)$10.99
Brake Shoe Lining Kit, Late - For B after 201000 with 9-3 4 inch linings, and 50 series. Set of 4 linings and rivets, each lining uses 8 rivets, measures 9.75 inches by 1.5 inches. Used to reline brake shoes. Replaces AB3848R, B223R, B2723R. (Part No: 105604)$28.95
Brake Shoe Spring - Fits John Deere - 820 2 cylinder, 830 2 cylinder (GAS), 830 2 cylinder (DSL), A, G, R, 60, 70, 80, 520, 530, 620, 630, 720, 730; Replaces: R21753, R21753R, A348R (Part No: 125768)$4.66
Brake Shoes, Set of 2 - These Brake Shoes are used on John Deere B serial number 201000 and up, and 50. Overall outer curved length: 9-3 4 inches, Width: 1-1 2 inches, 8 rivets retain lining to shoe. Replaces RE204403, AB3833R (Part No: 178908)$129.42
Pulley Clutch Facing -
  • For John Deere tractor models B (s n 201000-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2354R< li>
  • Floating Facings< li>
  • Order 2< li> < UL> (Part No: 105723)
$14.26
 
Clutch
Clutch Adjusting Disc - Made from ducitle iron. Will not crack under stress like the original grey cast iron design since ductile iron has far more tensile strength. This part is used on John Deere A up to serial number 647000, AO up to serial number 273079, AR up to serial number 273079. (Part No: 167578)$69.99
Clutch Adjusting Spring - This Clutch Adjusting Spring measures 1.915 inches long with a 0.120 inch wire thickness. The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. Three used per tractor. Sold individually. (Part No: 118280)$2.60
Clutch Cover - For A after SN# 648000, G after SN# 13804, 60, 620, 630, 70, 720, and 730. Not painted. This part has an I.D. of 12.1875 inches by 1.0625 inches Thick. Please verify size before ordering. Does not include springs part number R5071. Also Replaces F821R. (Part No: 105719)$38.99
Clutch Cover - For B (SN# 201000 & UP), 50, 520, and 530. Clutch Cover also replaces B3764R. Not painted. (Part No: 105725)$34.95
Clutch Cover Spring - Comes with rivet, 3 required per tractor sold individually. For tractor models A, G, 60, 520, 530, 620, 630. Replaces: Rivet 16H644, Spring A6121R (Part No: 126162)$14.99
Clutch Disc, Remanufactured -
  • For John Deere tractor models B, BN, BNH, BW, BWH< li>
  • Clutch Size: 7"< li>
  • Clutch Type: Woven< li> < UL> (Part No: 205717)
$86.01
Clutch Disc, Riveted - Fits B (SN# 201000 & above), 50, 520, 530. Replaces: AB3471R, AB4828R, RE29878 (Part No: 108434)$62.99
Clutch Drive Disc - Replaces OEM#s A2448R, AA2279R or AA232R. For model A (Serial# 488000 thru 647999), AR, AO (up thru Serial# 273079) (Part No: 112133)$169.95
Clutch Drive Disc - For tractor models A (From SN# 648000), AO, AR (From SN# 273080). Replaces A4028R, and AA4635R. (Part No: 105726)$145.99
Clutch Drive Disc, Sliding - For model (B SN# 201000 and up). (Part No: 126167)$63.40
Clutch Facing - Pulley clutch facing. Floating: B to 200999, BR, BO. 7-7 8 outside diameter, 4-7 8 inside diameter, 1.5 wide, .15 thick. For B, BO, BR (Part No: 105722)$14.00
Clutch Facing - Pulley clutch facing. Floating. For tractor models A, G, 60, 70, 620, 630, 720, 730. 10 inch outside diameter, 6-3 4 inch inside diameter, 1.575 inch wide, .15 inch thick. For 60, 620, 630, 70, 720, 730, A, G. Replaces: C614R, R90215. PRICED EACH. If you order 1, you will receive only 1 clutch facing. (Part No: 105721)$10.70
Clutch Facing, Pulley - Fits A serial number 648000 and up - 1 used per tractor, G - 1 used per tractor, 60 - 1 used per tractor, 70 - 2 used per tractor, 630 - 1 used per tractor, 730 - 2 used per tractor, AO serial number 273080 and up - 1 used per tractor, AR serial number 273080 and up - 1 used per tractor, D serial number 109944 and up - 1 used per tractor, 620 - 1 used per tractor, 720 - 2 used per tractor. Sold individually. Replaces AA6129R, AD1027R, AD752R, RE22932, RE29779. (Part No: 105718)$39.26
Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Part No: 126143)$10.16
Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1 4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Part No: 114893)$24.00
Clutch Handle Pivot Bolt - If your clutch handle is sloppy because the pivot bolt has seen better days, then simply replace it with this new clutch handle pivot bolt. This brand new bolt replaces part numbers B180R and R121198. Measures 0.650 inches outside diameter, to 0.530 inches outside diameter. 3-7 16 inches in length with 9 16 - 12 thread size. Uses B177R bushing, not included. (Part No: 126141)$28.76
Clutch Lever Pivot Bushing - Used with B180R Clutch Handle Pivot Bolt this bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. (Part No: 126142)$7.99
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models (A up to SN# 647999), (AO, AR up to SN# 273079). (Part No: 126148)$34.50
Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models (A from SN# 648000 and up), (AO, AR from SN# 273080 and up). (Part No: 126149)$34.50
Clutch Pin - Clutch linkage pin. Made in the USA, 1 2" diameter, 1 16" oversized to compensate for wear, use 1 2" drill to ream orginal hole, two used per tractor. For tractor models B, H, 50. (Part No: 178319)$6.96
Clutch Pin - Clutch linkage pin. Made in the USA, 9 16" diameter, 1 16" oversized to compensate for wear, use 9 16" drill to ream orginal hole, two used per tractor. For tractor models A, D, R, G, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: 178321)$10.70
Clutch Plate - Replaces OEM# A4355R. For A, D, G, 60, 620, 630, 70, 720 (Part No: 105720)$82.00
Clutch Plate - For tractor models: (A, AN, ANH, AW, AWH all serial number 648000 and up), (AO and AR serial number 273080 and up), G. 9-7 8 inch diameter by 0.375 inch thick. 1 Used Per Tractor. Replaces: F195R (Part No: 109780)$59.95
Clutch Pulley Brake Pad - For tractor models A, B, 50, 520, 530, 60, 630, 70, 720, 730. Sold individually. Replaces: AB4748R, AF4748R, RE29790 (Part No: 108125)$11.50
Clutch Pulley Cover - This clutch pulley cover fits the following tractor models: B up to serial number 200999, BO, and BR from serial number 325000 and up. It measures 10 inches in diameter. (Part No: 105724)$42.00
Dog, Clutch - For tractor models 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. Trhee required per tractor. (Part No: 126127)$31.50
 
Cooling System
Fan Belt - Drive belt for Generator and water pump. For tractor models A, AO, AR, 60 up to SN# 29999, 70 up to SN# 8099. (Part No: 183868)$26.76
Fan Drive Disc - For tractor models A, (B SN# 171992 and up), (G SN# 13910 and up), (H SN# 50500 and up), 50, 520, 530, 60, 630, 70, 720, 730. Also replaces B2123R. Measures 3.627 inches O.D., .747 inch Spline diameter, 10 splines, .989 inches thick. 2 Used per tractor, price is each. (Part No: 112427)$42.80
Fan Friction Washer -
  • For John Deere tractor models ANH, AO (s n 264644-later), AO, AR (s n 264644-later), AW, B, BN, BNH, BO (s n 334150-later), BR (s n 334150-later), BWH, D (s n 30400-later), G (s n 13910-later), GH (s n 13910-later), GM (s n 13910-later), GN (s n 13910-later), GW (s n 13910-later), H (a n 50499-earlier when converted to friction style fan drive), HNH (a n 50499-earlier when converted to friction style fan drive), HWH (a n 50499-earlier when converted to friction style fan drive), 50, 60, 70, 520, 530, 620, 630, 720, 730 (gas diesel LP)< li>
  • Replaces John Deere OEM number D399R, R105808< li>
  • 3-1 2" O.D.< li>
  • 1-1 8" I.D.< li>
  • 1.100" thick< li> < UL> (Part No: 115008)
$5.36
Fan Shaft Bearing - This Fan Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Part No: 172930)$36.00
Fan Shroud - For model A after SN# 487999, 60, 620, 630, all Rowcrop, Standard and Orchard. (Part No: 115522)$78.50
Gasket - Water Pump to Tank -
  • For John Deere tractor models B (s n B306600-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2887R< li> < UL> (Part No: 160355)
$4.06
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3 8 inches (11cm) length, 2-1 2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: 178758)$95.00
Pulley, Water Pump - 1 2" wide, used on pumps AB262R, AA5570R. For tractor models (50 SN# up to 5016058), (60 SN# up to 6029999), (A SN# 700200 and up), (AO, AR SN# 281400 and up), (B SN# B306600 and up). (Part No: 172278)$36.00
Radiator Bolt Kit - For tractor models (Unstyled A SN# 410000 to 476999), (AR SN# 250000 to 271999), (AO SN# 250000 to 271999). THIS KIT INCLUDES THE CORRECT LENGTH OF HARDWARE WHEN ADDING SHUTTERS. (Part No: 115510)$47.50
Radiator Bolt Kit - For tractor models (STYLED A, AN, AW, ANH, AWH SN# 477000 and up), (AR 272000 & up), (AO SN# 272000 & UP). (Part No: 115511)$51.00
Radiator Cap - A (Styled sn 477000 - 523599 AND sn 542700 and up), [ AO, AR (sn 260000 - 262699 AND sn 264300 and up) ], B (sn 60000 - 148999 AND sn 167000 and up), D (sn 143800 and up), G (sn 13000 - 20202), R, 60 (Orchard STANDARD ONLY- sn 600001 - 6042999). This radiator cap is for an unpressurized system and includes the gasket. The ID is 4-5 16" and is 1 2" tall. The OD measures 4.500". This cap has 3 tang's, The tang width is .560" and the inside center diameter measures 3.500". Replaces: AB1621R (Part No: 109740)$14.00
Radiator Core - Core size: Height 17-3 4, width 14-1 2, depth 2-1 8. For tractor models B, 50, 520 Replaces OEM# AB3599R, AB4666R (Part No: 101894)$250.00
Radiator Core - For Unstyled A 410000 to SN# 476999, Unstyled AO & AR 410000 to SN# 476999. 18 1 2 inches High x 18 5 16 inches Wide X 5 1 2 inches thick. Gasket Set is available separately as part number A432R. (Part No: 101892)$275.00
Radiator Core - Radiator Core - Styled A (serial number 488000 and up), AO (serial number 260000 and up), AR (serial number 260000 and up), 60. Order A2153R Gaskets if needed. Replaces: AA2235R, AA5582R (Part No: 101893)$295.00
Radiator Core Gasket -
  • For John Deere tractor models B (1939-53), 50, 520, 530< li>
  • Replaces John Deere OEM number B1507R< li>
  • 5-5 8" x 16"< li>
  • Bolt Holes: 18< li>
  • Material: Cork< li>
  • Sold as a pair< li>
  • Radiator Core Gasket - Paper use Item #: 112088< li> < UL> (Part No: 118495)
$17.95
Radiator Core Gaskets -
  • For John Deere tractor models B (1939-53), 50, 520, 530< li>
  • Replaces John Deere OEM number B1507R< li>
  • 5-1 2" x 16"< li>
  • 18 Bolt Holes< li>
  • Material: Paper< li>
  • Sold as set of 2 < li>
  • Radiator Core Gasket - Cork use Item #: 118495< li> < UL> (Part No: 112088)
$17.26
Radiator Core Gaskets - Cork -
  • For John Deere tractor models A (s n 488000-later), 60, 620, 630< li>
  • Replaces John Deere OEM number A2153R< li>
  • 5-1 2" x 18-1 2"< li>
  • Bolt Holes: 20< li>
  • Material: Cork< li>
  • Sold as a pair< li>
  • Radiator Core Gasket - Paper use Item #: 111905< li> < UL> (Part No: 118496)
$23.90
Radiator Filler Neck - For A, AO, AR, B, G Styled. Fits: (A Styled serial number 477000 - 523599 AND serial number 542700 and up), (B serial number 60000 - 148499 AND serial number 167000 - 200999), (G serial number 13000 - 20202). Replaces: AB1607R Radiator Filler Neck. Uses cap AB1621R. This is for narrow neck, 4-1 4 inch outside diameter and 2-5 16 inch where is slides into the tank. (Part No: 110046)$23.00
Radiator Gaskets - These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Part No: 111905)$23.90
Radiator Gasket Set - For tractor models (A unstyled up to SN# 476999 heavy duty), (AO unstyled heavy duty), (AR unstyled up to SN# 259999 heavy duty). (Part No: 179492)$13.26
Radiator Gaskets, Set of 2 - These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Part No: 111905)$23.90
Radiator Hose - Bulk 3 x 1-7/8" -
  • For John Deere tractor models B, BN (s n B60000-later), BNH (s n B60000-later), BO, BR, BW (s n B60000-later), BWH (s n B60000-later), 520, 530< li>
  • Compatible with John Deere Combine(s) 105< li>
  • Replaces John Deere OEM number H23740, B77R< li>
  • Replaces Case IH OEM number 407007R1< li>
  • I.D. (A): 1-7 8"< li>
  • O.D.: 2-1 4"< li>
  • Length: 3'< li>
  • For Hose Clamp use Item #: 130455< li> < UL> (Part No: 152028)
$20.50
Radiator Hose - Bulk 3 x 2-5/8" -
  • For John Deere tractor models A (s n 477000-later), AO (Styled s n 272000-later), AR (Styled s n 272000-later), B, 60, 620, 630< li>
  • Replaces John Deere OEM number A3317R, A4636R, B1808R, R32656< li>
  • I.D. (A): 2-5 8"< li>
  • O.D.: 3"< li>
  • Length: 3'< li>
  • For Hose Clamp use Item #: 130470< li> < UL> (Part No: 150822)
$38.26
Radiator Strap - For tractor models: 60, 620, 630, 70, 720, 730, A, AO, AR, (G from s n 13000 and up). (Part No: 180708)$22.00
Radiator Strap - For tractor models: 50, 520, 530, B, BO, BR. (Part No: 182810)$16.26
Water Pump - For B with SN# above B306600, 50 with SN# below 5016057, both with pulley width of 1 2". Water pump comes with pulley. (Part No: 111168)$136.90
Water Pump, 3/8 in. pulley - For A (SN# 7002000 & above), AO & AR (SN# 281400 & above), 620, 630, 60. Water Pump comes with 3 8" width Pulley. Comes with by-pass connection. Can be used with or without the by-pass connection. If by-pass is not used, plug can be ordered as part # F2282R. Replaces casting number R5318R. (Part No: 111167)$133.00
Water Pump Gasket -
  • For John Deere tractor models A (s n 700200-later), 60 (s n 6030000-later), 620, 630< li>
  • Replaces John Deere OEM number A4281R< li> < UL> (Part No: 154664)
$3.46
Water Pump Plug - Plug for AA6327R or AF2368R to plug off by pass tube when not needed. (Part No: 179547)$15.00
Wire Hose Clamp - 2-13/32" to 2-17/32" -
  • For John Deere tractor models B, BN, BNH, BO, BR, BW, BWH, 50, 520, 530< li>
  • Replaces John Deere OEM number B78R< li>
  • 2-13 32" - 2-17 32" (60mm -64mm)< li>
  • Ideal for 2-1 2" O.D. hose< li> < UL> (Part No: 130433)
$8.06
Wire Hose Clamp - 3" to 3-9/32" -
  • For John Deere tractor models A, B, BN, BNH, BW, BWH, 60, 620, 630< li>
  • Replaces John Deere OEM number A448R, B1813R< li>
  • 3" - 3-9 32" (76mm - 84mm)< li>
  • Ideal for 3-1 4" O.D. hose< li> < UL> (Part No: 130434)
$9.36
 
Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1 2" x 4" black & silver, vinyl cut. (Part No: 183241)$7.70
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1 2", black & yellow, vinyl cut (Part No: 183237)$34.00
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: 183582)$13.00
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: 183188)$13.00
2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: 183225)$28.50
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: 183579)$13.00
4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: 183248)$35.00
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: 183604)$35.00
Be Careful Plate - This plate is used on A, AN, (AW serial number 584000 and up), B, BN, (BW serial number 201000 and up), G, GM, (GN serial number 26000 and up), GW, R, 50, 520, 60, 620, 70, 720, 80, 820 2 cylinder. (Part No: 109913)$10.99
Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Part No: 173325)$19.70
 
Drive Train
Countershaft Idler Gear - For B (From S#201000), 50. Replace OEM Part Number B2417R. (Part No: 111048)$98.00
Flywheel Cover Inspection Plate - For tractor models A, B, 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: 125037)$29.99
Gear Shift Knob - Plastic knob, 3 8 inch fine thread. For tractor models (A styled from serial number 648000), AR, AO, (B styled from serial number 201000), (G styled from serial number 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cylinder). (Part No: 109545)$7.75
Inner Rear Axle Seal - This inner rear axle seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 50, B, BN, BNH, BW, BWH, BWH40 (Sn: 60000 & up) ], BO, BR (Sn: 329000 & up). Replaces: AB1325R, AB1326R, GG-335-20740, RE32442, RE57484, CR23710, 412119 (Part No: 106642)$10.70
Rear Axle Felt Seal - 3.50" I.D., 4.683" O.D., .425" thick. For tractor models (A up to SN# 547321, (AN up to SN# 547321), (AW up to SN# 547321), (ANH SN# 583999 & up), (AWH SN# 583999 & up), (60 all Orchard and Standard), (620 Orchard only), (630 Orchard only). (Part No: 179833)$29.00
 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 111377)$78.99
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: 178026)$14.00
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7 8 inches wide, 1-1 2 inch offset, 8-1 4 inch from farthest end of slot to center of mounting hole, 3-3 4 inch slot length, 3 8 inch mounting hole. (Part No: 173326)$27.00
Ammeter, Black - Black ammeter for John Deere. Fits A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720 gas or diesel, 730 gas or diesel, 820, 830. Replaces AF2749R, AM1864T (Part No: 150259)$22.00
Battery Box - Green -
  • For John Deere tractor models A (s n 584000-later), G (s n 26000-later)< li>
  • Replaces John Deere OEM number AA4841R, AA3954R, AA4941R< li>
  • Stamped Center Line< li>
  • 15-1 2" X 11-3 4" X 10-1 4"< li>
  • Mounts Under Seat< li>
  • Complete box - includes tray, upper & lower bushing< li>
  • Comes primered (color may vary). Prior to painting check fitment, sanding & skim coat may be needed< li>
  • Additional Handling & Oversize Fees Apply To This Item< li> < UL> (Part No: 112551)
$197.00
Battery Cable - Battery Cables: A to SN# 584000, B to SN# 200999, 0 gauge, length 28", terminal type 1-3. (Part No: 184450)$35.79
Battery Cable - For tractor models A to SN# 584000 up, B SN# 201000 up SN# 26001 up, 50, 60, 70D, 520, 620, 720D & 730D with cranking eng. Length 64", terminal type 1-3. (Part No: 173781)$36.50
Battery Strap - Battery Ground Straps. A to SN# 676599, B to SN# 286909, G to SN# 51142, 2010. 1 guage, length 13, terminal type Std+. For A, B, G (Part No: 184831)$18.50
Battery Strap - Battery Ground Straps. A to SN# 676000 up, B SN# 286910 up, G SN# 51143 up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 1 guage, length 6-1 2, terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Part No: 115790)$7.80
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)$35.98
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)$53.81
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1 2 inches diameter. (Part No: 182583)$28.99
Coil, 6V - Distributor Coil, 6 volt. Delco Remy equipped. For tractor models B, M, 40, 50(after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M. Replaces AM373T. (Part No: 105281)$14.26
Coil Bracket - This distributor coil bracket is used for tractor models: A, B, G, 50, 60, 70, 520, and 530. (Part No: 110868)$15.50
Coil, Wico - This Magneto Coil is for Wico Model X series magnetos. Fits models A, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BO, BR, BW, BW40, BWH, D, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, W111, W113, (R with pony engine). Replaces AR12006, X5700, X5700B, X5700C. (Part No: 111196)$87.00
Condenser - For tractor models (A, AO, AR, B, BN, BNH, BW, BWH all styled with distributor SN# XD100 and up) (Part No: 172664)$6.16
Distributor - Built exactly like the original, this new distributor replaces Delco 1111558. Complete and ready to install. If replacing a Magneto you need 2 A4157R distributor hold down clamps. (Part No: 178488)$370.00
Distributor Cap - This Distributor cap for a 2 Cylinder with a Delco Distributor, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o-clock and 3:00 o-clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Part No: 111725)$10.30
Distributor Cap, Horizontal - For Delco distributor on: A, B, G, 50, 60, 70. (Part No: 105568)$29.99
Distributor Cap, Vertical, 6 Volt - Distributor cap for Delco distributor, 2 cylinder, vertical, Please note the orientation of the 2 non-plugged terminals on top of the distributor cap (click "enlarge image"), there are two different orientations available (see Part No: 1935038 for the other orientation). Fits A, B, G, M, 320, 330, 40, 420, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 103152)$10.40
Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Part No: 103153)$9.00
Distributor Point Set - This Point Set is for a WICO XB distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A(659290-662873. (Part No: 172995)$19.50
Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Used on some of the following using Delco distibutors: A, AH, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BW, BWH, BWH40, D, G, GH, GM, GN, GW, 1010, 2010, 3010, 4010, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730. Replaces: 12H290R, 817363, 1909206, 1914142, 1916805, 1916806 (Part No: 111468)$14.99
Electronic Ignition Conversion Kit, 12 Volt Negative Ground - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558 distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system. (Part No: 105065)$110.99
Electronic Ignition Conversion Kit, 12 Volt Positive Ground - Electronic Ignition Conversion Kit, 12 Volt Positive Ground - Electronic Ignition Conversion Kit - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system. (Part No: 108156)$131.00
Electronic Ignition Conversion Kit, 6 Volt Positive Ground - Electronic Ignition Conversion Kit - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558 distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 6 volt POSITIVE ground system. (Part No: 122090)$133.46
Generator Cutout Assembly - For A and B to 1947. Replaces 1116809DR. (Part No: 173060)$27.90
Generator - Delco Style (10159), Remanufactured, Delco Remy, 1100506 -
  • For John Deere tractor models A, AO, AR, B, G, GH, GN, GW, H, HNH, HWH< li>
  • Replaces Delco Remy manufacturer number 1100506, 1101371, 1101377, 1101390< li>
  • Replaces manufacturer number 10159, 340-140, 92-01-3039< li>
  • Delco Style < li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li>
  • Amperage: 17< li>
  • Regulator: External < li> < UL> (Part No: 203524)
$420.01
Generator - Delco Style (10166), Remanufactured, Delco Remy, 1100955, TY1442 -
  • For John Deere tractor models A, G, GH, GN, GW, 50, 60< li>
  • Replaces John Deere OEM number TY1442, AA4921R, AF699R, AA4001R< li>
  • Replaces Delco Remy manufacturer number 1100955, 1101755, 1101777< li>
  • Replaces manufacturer number 10166, 340-30, 340-30A, 92-01-3037< li>
  • Delco Style < li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Amperage: 10< li>
  • Regulator: External < li> < UL> (Part No: 203526)
$405.01
Generator Pulley - Used on John Deere models: A, B, G, 50, 60, 70, AO, AI, AR, BO, BR, D, H. This pulley fits Delco generator numbers: 1100955, 1101356, 1101371, 1101777, 1100506, 1100508, 1101390, 1101755, 1100955, 1101385, 1101401, 1101720, 1101756, 1101784, 1101377. The pulley measures 4.500 inches outside diameter, 0.507 inch belt groove width, 0.670 inch inside diameter, with a 0.127 inch keyway. This part replaces OEM B1030R (Part No: 179405)$51.70
Governor Spring -
  • For John Deere tractor models B (s n 201000-later), R (w Pony Motor), 50, 520, 530< li>
  • Replaces John Deere OEM number B2636R< li> < UL> (Part No: 125553)
$47.00
Ignition Key - Only -
  • For John Deere tractor models A, AO, AR, B, G, 80, 420, 820 (2-Cylinder), 830 (2-Cylinder), 1010, 2010, 2510, 3010, 3020, 4010, 4020, 5010, 5020, 8020
  • Replaces John Deere OEM number A4700R< li> < li>
  • Compatible with Massey Ferguson tractor models Super 90, TO20, TO30, TO35, 35, 40, 50, 65, 85, 88< li>
  • Compatible with Massey Ferguson Construction & industrial models 200< li>
  • Replaces Massey Ferguson OEM number 180292M1, 192427M1< li> < UL> (Part No: 121147)
$3.50
Ignition Kit, Delco Clip-Held Distributor Cap - Contains points, condenser, and rotor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. For: A, AN, AH, AR, AO, B, BN, BW, D, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010(to 42000), 2010(to 42000), 3010 (to 1E32999), 4010(to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111558. (Part No: 103151)$10.16
Ignition Switch -
  • For John Deere tractor models A (Ignition s n 477000-502231), B (Ignition 325000-later), D (Ignition s n 143800-188057), 2155, 2350, 2355, 2355N, 2510, 2550, 2555, 2750, 2755, 2855, 2855N, 2950, 2955, 3020 (Ignition s n 68000-122999), 3055, 3150, 3155, 3255, 4020 (Ignition s n 91000-200999), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010 (s n 8000-later), 5020 (Ignition s n 24999-ealier), 6030, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6320, 6320L, 6400, 6400L, 6405, 6410, 6410L, 6415, 6420, 6420L, 6500, 6500L, 6505, 6510, 6510L, 6520, 6520L, 6605, 6615, 6715, 7020, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7510, 7520, 7600, 7610 (s n 89999-earlier), 7700, 7710, 7720, 7800, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430 (1974-1981), 8440, 8450, 8520, 8520T, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T< li>
  • Compatible with John Deere Combine(s) CTS, 4425, 4435, 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9500 SH, 9510, 9550, 9550 SH, 9560, 9560 SH, 9560 STS, 9570, 9570 STS, 9600, 9610, 9650, 9650 CTS, 9650 STS, 9660, 9660 CTS, 9660 STS, 9670, 9770 STS, 9860 STS, 9870 STS< li>
  • Compatible with John Deere Harvester(s) 7440, 7445, 7450, 7455, 9900, 9910, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976, 9986< li>
  • Compatible with John Deere Construction & industrial models 210C, 300D, 310, 310A, 310B, 310C, 310D, 310E, 310G, 310SE, 310SG, 315C, 315D, 315SE, 350D, 410 (also the ignition switch), 410B, 410C, 410D, 410E, 410G, 450C, 482C, 500 (s n 68000-later), 500A (s n 123113-earlier), 500C, 510, 510B, 510C, 510D, 600 (s n 91000-200999-later), 610B, 610C, 710B, 710C, 710D, 760, 760A< li>
  • Replaces John Deere OEM number R39554, AR46184, AR47373, AB1837R< li> < UL> (Part No: 121159)
$12.76
Key Switch, 2 Terminal - With keys. For tractor models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AA5592R, AB4063R, AB4087R. (Part No: 111037)$32.99
Light Clamp - This Light Clamp fits: (A Styled models up to serial number 583999 with cast iron dash), (B Styled models up to serial number 200999 with cast iron dash), (G serial number 13000 & up for rear light only), H, (60, 620, 630 Standard & Orchard), (8020 Used as an oil level pipe clamp). Replaces: A2613R (Part No: 126559)$10.30
Light Switch, 6 Volt -
  • For John Deere tractor models A (s n 477000-583999), B (s n 325000-later), D (s n 143800-186751), G (s n G13000-525999)< li>
  • Replaces John Deere OEM number AF708R, AB2687R, AF687R< li>
  • 6 Volt< li> < UL> (Part No: 173454)
$46.20
Light Switch Knob -
  • For John Deere tractor models A, B, D, G, H, L, LA, R< li>
  • Replaces John Deere OEM number F690R< li> < UL> (Part No: 126562)
$16.26
Magneto Cap - For Wico model C Magneto, tractor models A, AO, AR, B, BO, BR, D, G, H, R. Has "WICO" heat stamped on outer face like original. (Part No: 107080)$65.00
Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Part No: 105667)$49.95
Magneto Cap with Gasket - For WICO model X, for tractors AO, AR, A, B, BO, BR, D, G, H, R. Replaces: gasket: X5618, X5644, cap: X5643 (Part No: 105667)$49.95
Magneto Coil - For WICO model C magneto. For tractors A, AO, AR, B, BO, BR, D, G, H. Replaces: AR12011R and X2766. (Part No: 105659)$89.99
Magneto Coil - For WICO model X. For tractors A, AO, AR, B, BO, BR, D, G, H, R (Part No: 111196)$87.00
Magneto Condenser - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: 179181)$24.40
Magneto Ignition Kit - Ignition kit, less rotor. Contains:Points, gauge, condenser. 2-piece points using Wico XB Distributor. For A(659290- 662873)~ AR, AO(275397-532), B(268804 and up), 50(5000001 - 5016449). For 50, A, AO, AR, B (Part No: 179217)$32.73
Magneto Point Set - For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: 112107)$20.30
Magneto Point Set - For XH894, XH477B, XH1042, XH3001, XH909 Magnetos. (Part No: 130478)$23.00
Magneto, Remanufactured, AA3870R -
  • For John Deere tractor models A (s n 488000-later), B (s n 90001-later), G (s n 11981-later), H (s n 12001-later)< li>
  • Replaces John Deere OEM number AA3870R, AH653R< li>
  • Short lug - 3 8"< li>
  • For Tune-Up Kit use Item #: 105594< li> < UL> (Part No: 203721)
$650.01
Magneto, Remanufactured, AB2875R -
  • For John Deere tractor models A (s n 487999-earlier), B (s n 90000-earlier), G (s n 11980-earlier), H (s n 12000-earlier)< li>
  • Replaces John Deere OEM number AB2875R, AB3674R< li>
  • Long lug - 1 2"-3 4"< li>
  • For Wico X, XH, XV Tune-Up Kit use Item #: 107080< li> < UL> (Part No: 203605)
$740.01
Magneto Rotor - For WICO X Magnetos. Fits A, AO, AR, D, G, GH, R, All with WICO magneto (SN# XC100>) (Part No: 168696)$24.76
Magneto Tune Up Kit - Fits Wico X, XB, XH, XV magnetos Kits contain heavy duty point set, vibration-resistant condensor, and rotor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. (Part No: 105594)$61.00
Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: 182504)$14.99
Rotor - Used with Delco distributors with a clip held cap. For tractor models: A, AO, AR, B, D, G, M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 1010(1112577), 2010(1112577), 3010(1112577), 3020(up to serial number 58899 and 1112577), 4010(up to serial number 39499 and 1112581). Replaces 1905590. (Part No: 110177)$2.76
Spark Plug - Extended tip, 14mm thread, 3 4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: 179436)$3.50
Spark Plug - Extended tip, 14mm thread, 3 8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: 179437)$3.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: 182459)$3.16
Spark Plug Wire Holder - This is a Rubber Spark Plug Wire Holder used on John Deere A, B, G, 50, 60, 70 Tractors. It measures 0.755 inches thick, 0.755 inches wide and 1.375 inches long. Replaces A470R (Part No: 126684)$6.49
Spark Plug Wire Set - This is an Original Style with Cotton Braid Wire and copper core with RAJAH terminals has one end preassembled, Crimp Other End With A Crimping Tool. Replaces AA1222R, AA1890R, AB3480R, AB3481R, AB830R, AD1415R, AD1454R, AD1544R (Part No: 178937)$36.50
Spark Plug Wire Set - 2 cylinder spark plug wire set with 90 degree boots. For the following models: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, L, LA, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 128569)$14.99
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)$0.00
Starter Armature - Used with Delco Starter # 1107155, 1107424, 1107445 on John Deere (B with serial number 96000 to 200999), BO, BR, (70, 730, 80, 820, 830 with a pony start diesel). Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing Bushing Stop: 0.823 inches, Drive End to Bearing Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Part No: 182636)$79.00
Starter Brushes, Carbon, Set of 4 -
  • For John Deere tractor models A, 60, 720, 730< li>
  • Replaces Delco Remy Starter number 1906909< li>
  • Set of 4 Carbon Starter Brushes< li> < UL> (Part No: 184440)
$12.20
Starter - Delco Style (4647), Remanufactured, Delco Remy, 1108914, AA3262R -
  • For John Deere tractor models A (s n 584000-later), AO (s n 272000-later), AR (s n 272000-later)< li>
  • Replaces John Deere OEM number AA3262R, AA4930R< li>
  • Replaces Delco Remy manufacturer number 1108914< li>
  • Replaces manufacturer number 140-0998, 4647< li>
  • Delco Style < li>
  • Voltage: 6< li>
  • Rotation: Clockwise< li> < UL> (Part No: 205557)
$570.01
Starter - Delco Style DD (4678), Remanufactured, Delco Remy, 1108950, AA4002R -
  • For John Deere tractor models A (s n 584000-later), AO (s n 272000-later), AR (s n 272000-later), 60< li>
  • Replaces John Deere OEM number AA4002R, AA4931R, AA6044R, AR11150, TY6630< li>
  • Replaces Delco Remy manufacturer number 1108950, 1108989, 1103004< li>
  • Delco Style: Direct Drive< li>
  • Voltage: 12< li>
  • Rotation: Clockwise< li>
  • Teeth: 10< li> < UL> (Part No: 203211)
$690.01
Starter Drive - 12 Volt, 10 Teeth. Used with the following starters: 1107127, 1108914, 1108919, 1108950, 1108989 for Model A, G and 60 tractor. (Part No: 107474)$19.26
Starter Drive - For B, 50. Starter Drive used with Starter 1108155. 9 Teeth. Note: Not a complete starter. (Part No: 110780)$42.50
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: 182608)$17.00
Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Part No: 189672)$42.51
Starter Pedal Lever - For tractor models A, B, H. Starter Pedal Lever. (Part No: 115160)$21.19
Starter Rod Bushing -
  • For John Deere tractor models B (s n 201000-later), 50, 520< li>
  • Replaces John Deere OEM number B2287R< li>
  • Inner Diameter: 0.406"< li>
  • Outer Diameter: 1.000"< li>
  • Thickness: 0.505"< li>
  • Mounts on top of flywheel cover< li> < UL> (Part No: 126702)
$26.26
Starter Switch - Starter Switch button type For 50, 60, 70, A, B, G, R. (Part No: 105692)$11.48
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: 182606)$14.59
Voltage Regulator - For B, R, both 1947 to 1954, 25 combine, 45 combine, 55 combine, 65 combine. 6 volt positive ground. Regulator for use with generators 1100506, 507, 1101390, 397, 1947580. Saddle Mount. (Part No: 105284)$20.00
Voltage Regulator, 6 Volt - 6 volt. For tractor models A, 55, 60, 70, 95 tractors. (Part No: 105284)$20.00
Voltage Regulator Conversion Kit - Used with VR1813 and VR1814 regulators when replacing Delco Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. A, AO, AR, B, BO, BR, G, H, L, LA, M, MC, MI, MT (Part No: 184930)$57.00
Voltage Regulator, External, 12 Volt - This 12 Volt Saddle Mount Voltage Regulator has 4 Terminals. For models A, D, G, 50, 60, 55 Combines, 65 Combines, 95 Combines. Use with generators 1100955, 956, 1101777, 784, 1947579. Replaces regulators 1118266, 306, 791, VR1816. Saddle Mount. (Part No: 105588)$27.76
Voltage Regulator, External, 12 Volt - This 12 Volt Saddle Mount Voltage Regulator has 3 Terminals. For 12V A, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, all using generator 1100309. Replaces regulator 1118792. Saddle Mount (Part No: 105293)$32.76
 
Engine Bearings
Axle Felt Retainer - Rear -
  • For John Deere tractor models A (s n 547322-later), AW (s n 547322-later), 50 (88" tread only), 520 (88" tread only), 530 (88" tread only)< li>
  • Replaces John Deere OEM number A3041R< li>
  • Bare Steel< li>
  • Inside Diameter: 3.033"< li>
  • Outside Diameter: 4.727"< li> < UL> (Part No: 165218)
$44.26
Axle Felt Seal - Rear -
  • For John Deere tractor models A (s n 547322-later), AW (s n 547322-later), 50 (88" tread only), 520 (88" tread only), 530 (88" tread only)< li>
  • Replaces John Deere OEM number A3043R, AA3657R< li>
  • Inside Diameter: 3.375"< li>
  • Outside Diameter: 4.656"< li>
  • Width: 0.438"< li> < UL> (Part No: 165219)
$29.26
Engine Rod Bearing (STD) - Rod Bearing in standard. For B, BN, BW, all from SN# 96000, 50. Standard size journal measures 2.7485". 2 required per engine price is for each. Replaces YTO CB-469P-STD, AB4941R, NAB491R, B3202R, B3470R, and AB4627R, (Part No: 106735)$22.25
Main Bearing - .020" Oversize - Set -
  • For John Deere tractor models B, BO, BR< li>
  • Compatible with John Deere Engine(s) 175 (gas), 190 (gas)< li>
  • Bearing Size: .020" Oversize< li>
  • Sold in complete sets< li> < UL> (Part No: 159184)
$500.00
Main Bearing - Standard - Set -
  • For John Deere tractor models B, BO, BR< li>
  • Compatible with John Deere Engine(s) 175 (gas), 190 (gas)< li>
  • Bearing Size: Standard< li>
  • Sold in complete sets< li> < UL> (Part No: 159183)
$570.00
PTO Shaft Oil Seal Housing Gasket -
  • For John Deere tractor models A (s n 488000-later), ANH (s n 488000-later), AO (less Powertrol), AR (less Powertrol), AW (s n 488000-later), B (s n 201000-later), BN (s n 201000-later), BNH (s n 201000-later), BW (s n 201000-later), BWH (s n 201000-later), G (s n 43352-later), GH (s n 43352-later), GM (s n 43352-later), GN (s n 43352-later), GW (s n 43352-later), R, 50, 60 (s n 6025403-earlier with engine driven PTO), 70 (s n 7017500-later with transmission driven PTO & less Powertrol)< li>
  • Replaces John Deere OEM number A2396R< li> < UL> (Part No: 153580)
$4.56
Rod Bearing - Rod Bearing in 0.010. For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Priced each. If you order 1, you will receive bearings for 1 rod. Journal measures 2.990 inches. Replaces RP251433 and CB-468P-010. (Part No: 106733)$17.25
Rod Bearing - Rod Bearing in 0.010. For B, BN, BW, all from SN# 96000, 50. Journal measures 2.740 inch. 2 required per engine price is for each. Replaces YTO CB-469P-010, AB4942R, and NAB4924R. (Part No: 106736)$22.25
Rod Bearing - Rod Bearing in STANDARD. For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Priced each. If you order 1, you will receive bearings for 1 rod. Standard journal measures 3.000 inches. Replaces AA5351R, NAA5351R, and CB-468P-STD. (Part No: 106732)$19.19
Rod Bearings - Rod Bearing in 0.020. For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Priced each. If you order 1, you will receive bearings for 1 rod. Journal measures 2.98 inches. Replaces AA6089R, NAA6089R, and CB-468P-020. (Part No: 106734)$16.75
Rod Bearings - Rod Bearing in 0.020. For B, BN, BW, all from SN# 96000, 50. Journal measures 2.730 inch. 2 required per engine price is for each. Replaces YTO CB-469P-020, AB4944R, NAB4944R. (Part No: 106737)$21.75
 
Engine Gaskets
Carburetor Mounting Gasket -
  • For John Deere tractor models A (series), B (series), D, G, H< li>
  • Replaces John Deere OEM number 321R< li>
  • Carburetor to manifold mounting gasket< li> < UL> (Part No: 112103)
$5.30
Cork Flywheel Spacer Washer Oil Seal - This Cork Flywheel Spacer Washer Oil Seal has a 2.24 inch Inside Diameter, a 2.648 inch Outside Diameter and is .32 inch wide. Installs in oil slinger housing behind the flywheel. Used with AB251R or AB4109R spacer. It Fits: B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40. Replaces: B130R (Part No: 182948)$21.76
Head Gasket -
  • For John Deere tractor models A (1940-1953, s n 584000-later), AO (1940-1953, s n 272000-later), AR (1940-1953, s n 272000-later)< li>
  • Compatible with John Deere Engine(s) 321< li>
  • Replaces John Deere OEM number A2329R, A6120R< li>
  • Has one metal side< li>
  • 1940-1953< li> < UL> (Part No: 174639)
$47.00
Head Gasket Set - To serial number 487999. Upper Gasket Set. For tractor models A, AO, AR. Comes with Lead Washers. (Part No: 183861)$162.50
Oil Pump Gear Cover Gasket -
  • For John Deere tractor models A (s n 424025-later), ANH (s n 424025-later), AO (s n 251486-later), AR (s n 251486-later), AW (s n 424025-later), B, BN, BNH, BO, BR, BW, BWH, G, GH, GM, GN, GW, H, HNH, HWH, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840< li>
  • Replaces John Deere OEM number B246R< li>
  • 0.020" Thick< li>
  • 4 Bolt Hole< li> < UL> (Part No: 164422)
$7.30
Oil Pump to Crankcase Gasket -
  • For John Deere tractor models A (s n 424025-later), AO (s n 251486-later), AR (s n 251486-later), AW (s n 424025-later), B, BN, BNH, BO, BR, BW, G, GH, GM, GN, GW, R, 50, 60, 70, 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number B251R< li>
  • 0.031" Thick< li>
  • 3 Bolt Hole Pattern< li> < UL> (Part No: 164421)
$7.20
Overhaul Gasket Set - For A after serial number 584000. AO, AR SN# 272000 to 281999. Gas 2 Cyl, 321 CID 5-1 2" Bore. Overhaul gasket set 1 used per engine. Does not include Rear Crankshaft Seal Packing. (Part No: 106920)$174.50
Overhaul Gasket Set - For B, BN, BW with 2cyl 190 CID Gas after SN# 201000. Full Gasket Set. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Part No: 106921)$80.00
Overhaul Gasket Set - For A, AH, AN, and AW S#488000 to 583999 and AO and AR S#260000 to 271999. Full Gasket Set WITHOUT CRANKSHAFT SEALS. (Part No: 106920)$174.50
Overhaul Gasket Set - For A, AH, AN, AW, all SN# 584000 and up. AO, AR SN# 272000 to 281999. Full Gasket Set (Part No: 106920)$174.50
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: 178141)$9.36
Valve Cover Gasket - This valve cover gasket fits the following tractor models: A, AO, and AR. Replaces part number: A1575R. (Part No: 179397)$17.00
 
Engine Overhaul Kits
Engine Rebuild Kit - Less Bearings, 321 -
  • For John Deere tractor models A (s n 584000-later), AO (s n 272000-later), AR (s n 272000-later)< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • Bore: 5.500"< li>
  • Stroke: 6.750"< li>
  • 5.625" piston compression height< li>
  • Less pan gasket< li>
  • Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals< li>
  • Kit does not include connecting rod or main bearings< li>
  • For standard connecting rod bearing use Item #: 106734< li> < UL> (Part No: 130640)
$730.00
Rebore Kit - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore STANDARD. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin, pin size 1.750 inch. (Part No: R2457)$524.40
Rebore Kit - Piston Kit For A, AH, AN, and AW S#584001 & up, AO and AR S#272001 & up, and 60 5 1 2 inch - Bore STANDARD. Contains pistons, rings, pins, and retainers. (Part No: R2027)$545.10
Rebore Kit, .045 - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore - .045 OVERBORE. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin, pin size 1.750 inch. (Part No: 184834)$588.25
Rebore Kit, .090 - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore - .090 OVERBORE. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin. (Part No: R2459)$588.99
Rebore Kit, .125 - For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2 inch Bore - .125 OVERBORE. Contains pistons, rings, pins, and retainers. (Part No: 185777)$588.25
Rebore Kit, .125 Oversize - Piston Kit For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore, .125 oversize. Contains pistons, rings, pins, and retainers. (Part No: 185832)$456.00
Rebore Kit, .125 Oversize - Piston Kit for B, BN, BR, and BW Serial number 60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1 2 inch bore plus .125. Contains Pistons, rings, pins and retainers. (Part No: 184994)$502.22
Rebore Kit, Standard - Piston Kit For B, BN, BR, and BW S#60, 000 thru 96, 000, 50 all with 1.23 inch piston pin and 4 1 2 inch bore. Contains pistons, rings, pins and retainers. (Part No: R7353)$448.50
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (A from SN# 488000 and up), (AO, AR from SN# 260000 and up), 60. (Part No: VTKJD60)$276.41
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (B up to SN# 95999), BO, BR. (Part No: 184140)$220.60
Valve Train Kit - Kit contains valves, guides, springs and locks. For tractor models (B from SN# 96000 and up), 50. (Part No: 185059)$211.77
 
Engine Parts
Compression Relief Petcock - Brass. For A, B, D, G and GP series. (Part No: 126174)$49.95
Crankcase Vent Tube - For tractor models: 60 without power steering, 620, 630, (A from s n 648000), (AO, AR from s n 273080). (Part No: 187327)$51.04
Cylinder Head - For tractor models (B unstyled SN# 1000-59999, (BO, BR SN# 325000-328999). Replaces B357R. Comes with Valve guides and Seats only. (Part No: AB311R)$474.86
Cylinder Head, Remanufactured, B1306R -
  • For John Deere tractor models B (s n B60000-B95999), BN (s n B60000-B95999), BNH (s n B60000-B95999), BO (s n 329000-later), BR (s n 329000-later), BW (s n B60000-B95999), BWH (s n B60000-B95999)< li>
  • Replaces John Deere Casting number B1306R< li>
  • Engine 190 (gas)< li>
  • Cylinders: 2< li>
  • Casting No. B1306R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200273)
$790.01
Cylinder Head, Remanufactured, B1784R, B2501R, B2871R, AB4204R -
  • For John Deere tractor models B (s n B96000-later), BN (s n B96000-later), BNH (s n B96000-later), BW (s n B96000-later), BWH (s n B96000-later)< li>
  • Replaces John Deere Casting number B1784R, B2501R, B2871R, AB4204R< li>
  • Cylinders: 2 (gas)< li>
  • Casting No. B1784R, B2501R< li>
  • Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed< li>
  • Cleaned and tested for cracks< li> < UL> (Part No: 200274)
$900.01
Float Valve - Stainless steel needle float valve~ hard chrome needle. For: A, B, C, D, G series~ 50, 60 all fuel. Replaces AR10077. For 50, 60, A, B, C, D, G (Part No: 183782)$16.50
Governor Shaft Bearing - This Governor Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Part No: 172930)$36.00
Ring Gear, Flywheel - This ring gear is for tractor models (B SN# 201000 and up), 50, 520, 530. 170 Teeth. Replaces original part number B2462R (Part No: 110998)$119.99
Ring Gear, Flywheel - This ring gear is for tractor models (A SN# 584000 and up), (AO, AR SN# 272000 and up), 60. (Part No: 110999)$115.00
Ring Gear, Flywheel - This ring gear has 168 teeth and inside diameter just under 20 inches. For tractor models (A SN# 477000 to 583999), (AO, AR up to SN# 271999), (G, 70, 720, 730 diesel). (Part No: 110919)$129.99
Steering Wheel Starter Crank - Fits John Deere - A (sn 584000 and up), B (sn 201000 and up), 50, 60, 70 (Gas), 520 (up to sn 5208099), 620 (up to sn 6213099); Replaces: AB3580R (Part No: 126729)$58.00
Valve, Exhaust - For tractor models A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. (Part No: 128581)$32.99
Valve, Exhaust - For tractor models (A up to SN# 487999), (AO, AR up to SN# 259999). Replaces A4739R, AA1811R, AA4959R. (Part No: 179494)$29.76
Valve, Exhaust - For tractor models (B up to SN# 95999), BO, BR. Replaces B2878R. (Part No: 179501)$31.69
Valve Guide - For A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. Valve Guide. (Part No: 185355)$10.90
Valve Guide - For tractor models (A up to SN# 487999), (AO, AR SN# up to 259999. Replaces A35R (Part No: 188953)$22.96
Valve Guide - For tractor models (B up to SN# 95999, BO, BR. Replaces AB4058R (Part No: 179496)$11.26
Valve, Intake - Single Intake Valve - For model B Serial #96000 and up, M. (Part No: 108980)$24.26
Valve, Intake - For tractor models A, AH, AN, AW all with SN# after 488000. AO, AR both with SN# after 272001. 60. Intake Valve. (Part No: 128573)$20.90
Valve, Intake - For tractor models (A up to SN# 487999), (AO, AR up to SN# 259999). (Part No: 179182)$24.76
Valve, Intake - For tractor models (B up to SN# 95999), BO, BR. (Part No: 179500)$19.76
Valve Lock - Pair - This pair of valve locks is a set for 1 valve. For tractor models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Part No: 185432)$21.99
Valve Lock Pair - For tractor models (A up to SN# 487999), (AO, AR both up to SN# 259999). (Part No: 180664)$21.50
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve-Kit)$0.00
Valve Spring - For tractor models 60, A, AO, AR, R. (Part No: 184186)$19.50
Valve Spring Retainer - For tractor models (A up to SN# 487999), (AO, AR up to SN# 271999), R. (Part No: A245R)$30.75
 
Engine Pistons and Sleeves
Piston Pin Bushing - For model A with rod no. A2344R, G, 60, 70, 620. (Part No: 108184)$14.76
Piston Pin Bushing - For 1.417" Diameter Piston Pin. On tractor models B From S#96000, 50, 520. All with rod numbers B3201R, B3652R or B1770R. 2 Required per engine. (Part No: 184564)$16.50
 
Engine Rings
Piston Rings .045 - Piston Ring Set. 1 required for complete engine. 0.045 OVERBORE, standard bore size 5.5", 4 compression rings at .186 inch, 1 oil ring @.3105 inch on 321 CID gas engine. Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-45)$157.31
Piston Rings .090 - Piston Rings Set. 1 required for complete engine. 0.090 OVERBORE, standard bore size 5.5", 4 compression rings at .186", 1 oil ring @.3105" on 321 CID gas engine. Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: 120988)$194.00
Piston Ring Set - Set for 1 engine. Used on engines with 3 Compression rings and 2 Oil Ring at 1 4 inch each, on each piston. For tractor models A, AO, AR. (Part No: 129032)$178.00
Piston Ring Set -
  • For John Deere tractor models B (s n 59999-earlier, With 2-Cylinder Gas Engine), BO (s n 328999-earlier, With 149 2-Cylinder Gas Engine), BR (s n 328999-earlier, With 149 2-Cylinder Gas Engine)< li>
  • 4-1 4" + .030" with 4-3 16" Compression and 4-3 16" Oil< li> < UL> (Part No: 167088)
$71.00
Piston Ring Set, .045 Overbore - For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".045 oversize. For pistons that use: 4 compression rings at 3 16 inch and 1 oil ring at 5 16 inch. Complete set for 1 engine. (Part No: R2030R)$130.36
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models A, AO, AR, 60 (all gas)< li>
  • Compatible with John Deere Engine(s) 321 (gas)< li>
  • This is a custom made set that requires a 4 week lead time< li>
  • Standard Bore: 5.500"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (3) @ .250"< li>
  • Oil Rings per Piston: (2) @ .250"< li>
  • Top Groove Size: .250"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .250"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .250"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .250"< li>
  • 4th Groove Style: Spacer Chrome Rail Oil Inner Spring< li>
  • 5th Groove Size: .250"< li>
  • 5th Groove Style: Cast Iron Oil< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129032< li> < UL> (Part No: 129126)
$178.00
Piston Ring Set - .045" Oversize - 2 Cylinder -
  • For John Deere tractor models B (s n 60000-95999), BO (s n 329000-337514), BR (s n 329000-337514)< li>
  • Compatible with John Deere Engine(s) 175 (gas)< li>
  • Replaces John Deere OEM number AB3727R< li>
  • Standard Bore: 4.500"< li>
  • Ring Size: .045" Oversize< li>
  • Compression Rings per Piston: (3) @ .188"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .188"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .188"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129168< li> < UL> (Part No: 129167)
$96.00
Piston Ring Set, .090 - For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".090 oversize. For pistons that use: 4 compression rings at 3 16 inch and 1 oil ring at 5 16 inch. Complete set for 1 engine. (Part No: 129106)$150.00
Piston Ring Set - .090" Oversize - 2 Cylinder -
  • For John Deere tractor models B (s n 96000-200999), BO (s n 329000-337514), BR (s n 329000-337514)< li>
  • Compatible with John Deere Engine(s) 175 (gas)< li>
  • Standard Bore: 4.500"< li>
  • Ring Size: .090" Oversize< li>
  • Compression Rings per Piston: (3) @ .188"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .188"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .188"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For standard use Item #: 129167< li> < UL> (Part No: 129168)
$96.00
Piston Ring Set, .125 Oversize - For model For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".125 oversize.. Piston Rings set for 1 engine fits pistons in rebore kit R1981. (Part No: 129107)$150.00
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32"), 4. Number and size of oil rings for each piston (Ex: (1) 5 32"). (Part No: RING-SETS)$0.00
Piston Ring Set - Standard - 2 Cylinder -
  • For John Deere tractor models B (s n 60000-95999), BO (s n 329000-337514), BR (s n 329000-337514)< li>
  • Compatible with John Deere Engine(s) 175 (gas)< li>
  • Replaces John Deere OEM number AB3982R< li>
  • Bore: 4.500"< li>
  • Ring Size: Standard< li>
  • Compression Rings per Piston: (3) @ .188"< li>
  • Oil Rings per Piston: (1) @ .188"< li>
  • Top Groove Size: .188"< li>
  • Top Groove Style: Barrel Face Triple Chrome< li>
  • 2nd Groove Size: .188"< li>
  • 2nd Groove Style: Torsional< li>
  • 3rd Groove Size: .188"< li>
  • 3rd Groove Style: Torsional< li>
  • 4th Groove Size: .188"< li>
  • 4th Groove Style: Cast Iron Oil Inner Spring< li>
  • Sold as a complete 2 cylinder set< li>
  • For .045" use Item #: 129168< li> < UL> (Part No: 130039)
$96.00
Piston Rings, STD - Piston Ring Set, Complete for 1 engine. 321 CID Gas engine STANDARD 5.5 inch bore, 4 compression rings at .186", 1 oil ring at .3105". Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: 130038)$164.00
Ring Set - For B, BN gas SN# 201000 UP, 50 gas, 2 Cyl, 190 CID 4-11 16" bore. Set for one engine. Each piston contains 4 compression 3 16, 1 Oil 5 16. (Part No: 128898)$150.00
 
Exhaust System
Chrome Curved Exhaust Stack - For Styled B, 50, 520, 530. Chrome Curved Exhaust Stack. (Part No: 115071)$191.48
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 118823)$116.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119038)$91.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 114858)$120.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 173286)$112.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 173287)$132.30
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 119080)$170.60
Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: 173281)$82.00
Chrome Straight Exhaust Pipe - For Styled B, 50, 520, 530. Chrome Straight Exhaust Pipe, 4 bolt flange. The original pipe has a dent for the steering column. This pipe is skinner than the original and does not need the dent. This pipe is 3 inches outside diameter and 24 inches long. (Part No: 178672)$174.00
Exhaust Chrome Curved Stack - Chrome For Unstyled A, G, 60, 70, 620, 630, 720, 730. 4 inch outside diameter, 24 inch in length. (Part No: 115068)$203.83
Exhaust Chrome Straight Pipe - Chrome Pipe is double wall construction with 4 bolt flange is 4" O.D. Length 24". For Unstyled A, G, 60, 70, 620, 630, 720, 730 (Part No: 111268)$180.00
Exhaust Pipe - 2 bolt inlet, 21" vertical length, 19" horizontal length, 1-7 8" outlet O.D. Used with manifold B2179R, AB3980 casting# B2803R and muffler AB2700R. For tractor models B, BN, BNH, BW all with SN# B96000-B200999 built between 1939-1947. (Part No: 110483)$38.00
Exhaust Pipe - 2 bolt inlet, 25" vertical length, 20" horizontal length, 1-7 8" outlet O.D. Used with manifolds B2282R, B2472R, AB3980R casting# B2803R and muffler AB2700R. For tractor models B, BN, BNH, BW. All SN# B201000 and up. (Part No: 108024)$38.00
Exhaust Stack -
  • For John Deere tractor models B (S N B96000 - Later), BN, BW, 50, 520, 530< li>
  • Straight Pipe< li>
  • 4 Hole Base Plate< li>
  • 24" Tall< li>
  • Inside Liner For Long Life< li>
  • Chrome Plated< li>
  • Curved Stack - Chrome Plated use Item #: 115069< li> < UL> (Part No: 114752)
$135.88
Exhaust Stack -
  • For John Deere tractor models A, G, 60, 70, 620, 630, 720, 730< li>
  • Style: Straight< li>
  • 4 Hole Base Plate< li>
  • O.D.: 4" < li>
  • Length: 24"< li>
  • Double Wall Liner< li>
  • Stainless Steel< li>
  • Straight Stack - Chrome Plated use Item #: 115068< li> < UL> (Part No: 115066)
$180.88
Exhaust Stack -
  • For John Deere tractor models B (after SN B96000), 50, 520, 530< li>
  • Style: Straight< li>
  • 4 Hole Base Plate< li>
  • Length: 24"< li>
  • Double Wall Liner< li>
  • Stainless Steel< li>
  • Straight Stack - Chrome Plated use Item #: 115071< li> < UL> (Part No: 115069)
$148.52
Manifold - All Fuel -
  • For John Deere tractor models A (s n 488000 - 583999), AO (s n 272000 - later, 1940-1947), AR (s n 272000 - later)< li>
  • Replaces John Deere OEM number A2383R< li> < UL> (Part No: 126523)
$191.00
Muffler - Unstyled (no dent) For tractor models A, G, 620, 70, 720. Replaces AF3770R. Outlet is 2 1 2 inches, 24 1 4 overall length. (Part No: 113316)$61.00
Muffler Clamp, 1-1/2 - New Clamp for 1-1 2 inch outside diameter muffler inlet. (Part No: 108865)$3.20
Muffler Clamp, 1-1/4 - New Clamp for 1-1 4 inch outside diameter muffler inlet. (Part No: 182682)$3.70
Muffler Clamp, 1-3/4 - New Clamp for 1-3 4 inch outside diameter muffler inlet. (Part No: 108866)$3.56
Muffler Clamp, 1-3/8 - New Clamp for 1-3 8 inch outside diameter muffler inlet. (Part No: 182687)$1.60
Muffler Clamp, 2-1/4 - New Clamp for 2-1 4 inch outside diameter muffler inlet. (Part No: 108870)$3.56
Muffler Clamp, 2-3/4 - New Clamp for 2-3 4 inch outside diameter muffler inlet. (Part No: 108872)$3.55
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: 108873)$4.66
Muffler Clamp, 3-1/2 - New Clamp for 3-1 2 inch outside diameter muffler inlet. (Part No: 108874)$10.20
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: 108875)$4.66
Muffler Clamp, 4-1/2 - New Clamp for 4-1 2 inch outside diameter muffler inlet. (Part No: 118838)$10.30
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: 118841)$12.76
Muffler, Vertical - Vertical muffler with dent, round body 4-Bolt Base plate, 2-1 2" exhaust O.D., ~ 24-1 2" total length~ 3-3 4 body diameter. For tractor models: (A, AR, AN, AW, AWH all 1933-1952), G (SN# 410000> 1938-1953), 60, 70, 620, 720 (gas & all fuel). Replaces AF3770R and R21826. (Part No: 101170)$33.00
Muffler, Vertical - Round body 4-1 4" shell diameter, 4 bolt mounting plate, A= 4-1 2" inlet length, B= backing plate, C= 14-1 2" shell length, D= 2-1 2" outlet length, E= 2-5 8" outlet O.D., F= 21" overall length. For tractor models (A, AN, ANH, AR, AW all SN# 410000 and up), 60, 620, 70, 720. This style is not available from the OEM. (Part No: 101168)$32.50
Muffler, Vertical - Has 4 Hole Baseplate. Outlet is 2 1 4 inch O.D., 24 inches overall length. For tractor models B SN# B96000 and above, BN, BW, 50, 520, 530. Has 4 bolt square mounting flange. (Part No: 101171)$25.50
Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: 108632)$6.96
Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: 108633)$8.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: 108635)$10.30
Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: 108636)$10.30
Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: 108643)$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: 108645)$13.26
Rain Cap - This rain cap is for a 4.50 inch pipe. (Part No: 108749)$14.00
Rain Cap - This rain cap is for a 5.0 inch pipe. (Part No: 108750)$15.26
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 179749)$5.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: 185428)$9.50
Stainless Steel Muffler -
  • For John Deere tractor models A (s n 476999-earlier), AR, G, GM, 60, 70, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number AA2214R, AF3770R< li>
  • Polished Stainless Steel< li>
  • Overall Length: 24"< li>
  • Shell Length: 28.850"< li>
  • Shell Diameter: 3.735"< li>
  • Outlet OD: 2.440"< li> < UL> (Part No: 164542)
$155.00
Stainless Steel Straight Exhaust Pipe - For Styled B, 50, 520, 530. Stainless Steel Straight Exhaust Pipe. (Part No: 178673)$195.60
Straight Pipe - Stainless Steel, Straight Stack. Double wall construction with 4 bolt flange. 24 inches tall, 3 1 2 inch outside diameter. For tractor models Unstyled A, G, 60, 70, 620, 630, 720, 730. (Part No: 178912)$205.89
Stud, Manifold - 7 16" x 5-1 2". For tractor models (A from SN# 410000 to 487999), (AO, AR from SN# 250000 to 259999). Use R5294 nut. (Part No: 178415)$6.96
Stud, Manifold - 7 16" x 4-3 8". For tractor models A, (AO, AR from SN# 272000 to 281999), B, (BO, BR from SN# 325000 and above), H. Replaces R2622R. Uses R5294 nut. (Part No: 178414)$8.30
Stud, Manifold - 7 16" x 3-1 2". For tractor models (A from SN# 488000 and above), (AO, AR from SN# 272000 to 281999). Uses R5294 nut. (Part No: 178410)$6.96
Stud, Manifold - 7 16" x 4-3 4". For tractor models (A all-fuel from SN# 488000 to 583999), (AO, AR from SN# 250000 to 259999), (B from SN# 1000 to 529999). Uses R5294 nut. (Part No: 178413)$6.96
Stud, Manifold - 7 16" x 4". For tractor models (B from SN# 6000 and above), (BO, BR from SN# 239000 and up). Uses R5294 nut. (Part No: 178412)$6.96
Stud Nut, Manifold - Original 7 16 inch style with oversized shoulders. Replaces 10A1052, 17890A, 30-3462161, 369065X1, 50A1008, 915834. For the following tractors: A, B, AI, AR, BO, BR, H (Part No: 183464)$1.70
 
Fuel System / Air Intake
3-Way Fuel Valve - Made of brass. For tractor models (A SN# 497590 to 697756), (AR, AO SN# 260000 to 280849), (B SN# 94494 to 305246), (D SN# 148872 to 191777), (H SN# 20650 and up), (G SN# 13000 to 59701). (Part No: 125700)$89.95
3-Way Fuel Valve - For tractor models (A SN# 410859-476999), (B SN# 1000-11621), (D SN# 30400-143799), GP. (Part No: 121906)$74.95
3-Way Fuel Valve - For tractor models (AR SN# 250000-259999), (B SN# 11622-59999), (BR SN# 325000 and up), (G (SN# 1000-12999). (Part No: 121905)$74.95
Air Cleaner Oil Cup - Cup is 5 3 4 inches O.D. at the lip. Fits B SN# 60000 and up, BR-BO SN# 329302 and up, H, 50, 520 and 530. For clamp style air cleaners, not clip style. Replaces 1001012M91, 10P1146, 10P931, 1754014M1, 1K-6054, 1K-6054, 311510, 362974R91, 375550R91, 378333R1, 52864DA, AB1626R, AB3477R, AM3172T, AM465T, AM468T, AT10592, G46325 (Part No: 108775)$28.99
Air Filter, Crankcase - For tractor models A, D, G. (Part No: 182545)$26.54
Air Filter, Crankcase - For tractor models B, H. (Part No: 182547)$25.26
Carburetor Bowl Nut Spring - A, B, D, (G DLTX24 Only), GP, (50 All fuel only up to serial number 5015950), (60 All fuel only up to Serial Number 6013899). Used on Marvel Schebler DLTX10, DLTX15, DLTX16, DLTX18, DLTX19, DLTX24, DLTX33, DLTX34, DLTX41, DLTX53, DLTX6, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73 Replaces John Deere Part Numbers: R10078, R10078R (Part No: 118930)$4.50
Carburetor Choke Shaft, DLTX - Carburetor Choke shaft and lever. For tractors: A, B, G, using Marvel-Schebler carburetor models: DLTX34, DLTX51, DLTX53. For 105, 1207, 1209, 1214, 1217, 1219, 130, 135, 1380, 1480, 183, 220, 230, 240, 330, 335, 375, 385, 430, 435, 45, 480, 483, 485, 530, 535, 55, 6602, 78, 95. (Part No: 110736)$26.26
Carburetor Elbow & Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1 8 inch pipe threads. Female end is 1 4 inch flair. (Part No: 110005)$4.40
Carburetor Float, DLTX - For Early A, Early B, D, GP, G. Carburetor Float for use with DLTX10, DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX34, DLTX38, DLTX41, DLTX51, DLTX53, DLTX63. (Part No: 108457)$23.99
Carburetor Float, DLTX - For A, AO, AR, B with Marvel-Schebler Carburetors DLTX13, DLTX67, DLTX71, DLTX72, DLTX73. (Part No: 108459)$32.50
Carburetor Kit -
  • For John Deere tractor models A, B, D, G< li>
  • For Marvel Schebler carburetor numbers: DLTX5, DLTX6, DLTX8, DLTX10, DLTX11, DLTX13, DLTX15, DLTX16, DLTX17, DLTX18, DLTX19, DLTX24, DLTX31, DLTX33, DLTX34, DLTX38, DLTX39, DLTX41, DLTX51, DLTX53, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73, DLTX107U, DLTX108U< li>
  • Includes Gaskets, Needle & Seat< li> < UL> (Part No: 100736)
$24.50
Carburetor Kit, Basic - Kit for Marvel DLTX18, DLTX38, DLTX41, DLTX53, DLTX71, DLTX72, DLTX19, DLTX24, DLTX39, DLTX51, DLTX10, DLTX34, DLTX67, DLTX73, DLTX3, DLTX63, DLTX6, DLTX31, DLTX8, DLTX11, DLTX13, DLTX5, DLTX16, DLTX15, DLTX17, carbs used on A, B, D, G, GP. (Part No: MS104)$52.33
Carburetor Repair Kit - Basic carburetor repair kit contain needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture numbers: DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX33, DLTX41, DLTX51. For A, G, GM, GP (Part No: 121862)$46.00
Carburetor Throttle Lever - For tractor models: A, B, G. Fits Marvel Schebler carbs DLTX8, DLTX18, DLTX24, DLTX33, DLTX34, DLTX51, DLTX53. Replaces AR10026R. (Part No: 182805)$52.00
Choke Cable - Universal choke cable 72 inches long, 7 16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: 178125)$17.00
Choke Knob - For tractor models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: 109932)$9.95
Fuel Cap - Unstyled (no lettering), 2-11 16" I.D. x 5 8" Height. For tractor models A, B, D, G (Part No: 126515)$13.50
Fuel Cap, Vented - For tractor models A, B, G, H, 50, 60, 70, Says Buy Clean Fuel, Keep it Clean . 2 notch cap for a 2 inch tank inlet. Replaces AD709R (Part No: 107951)$5.76
Fuel Control Rod - For tractor models: (A electric start from s n 497590 to 583999), (AR electric start up to s n 259999), (G from s n 13000 and up). (Part No: 179151)$38.26
Fuel Filter Repair Kit -
  • For John Deere tractor models A (s n 584000-later, automatic shut off), 50 (s n 5016133-later, automatic shut off), 60 (s n 6028469-later, automatic shut off), 70 (s n 7006494-later, automatic shut off), 80 (diesel with Pony start), 520 (automatic shut off), 530 (automatic shut off), 620 (automatic shut off), 630 (automatic shut off), 720 (gas diesel), 730 (gas diesel), 820 (diesel with Pony start), 830 (diesel with Pony start), 840 (diesel with Pony start)< li>
  • Replaces John Deere OEM number A4978R, A4983R, AA4297R, C1778R< li>
  • Contains: Diaphragms, washer, screen, gasket< li> < UL> (Part No: 127447)
$21.76
Fuel Line -
  • For John Deere tractor models A (sn"477000 - 622820), AO (sn:272000-later (Styled), AR (sn:272000-later (Styled)< li>
  • Replaces John Deere OEM number AA5067, AA2349R< li>
  • Must use with a three way valve< li> < UL> (Part No: 109865)
$41.99
Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: 107976)$34.76
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: 114940)$8.99
Nozzle -
  • For John Deere tractor models A (s n 477000-later), A (s n 41000-476999), AO (s n 272000-later), AO (s n 250000-271999), AR (s n 272000-later), AR (s n 250000-271999)< li>
  • Replaces John Deere OEM number R10116< li>
  • For DLTX 33, 41, 53, 71, 72 Carbs< li> < UL> (Part No: 112215)
$46.76
Rubber Fuel Tank Pad -
  • For John Deere tractor models AO (s n 272000-later), AR (s n 272000-later), B (s n 96000-later), BN (s n 96000-later), BNH (s n 96000-later), BW (s n 96000-later), BWH (s n 96000-later), G (s n 13000-later), GH (s n 13000-later), GN (s n 13000-later), GW (s n 13000-later), 60 (Standard s n 604299), 620 (Orchard)< li>
  • Replaces John Deere OEM number B1825R< li>
  • 1-1 2" O.D.< li>
  • 1 2" Thick< li>
  • 1 2" Center Hole< li> < UL> (Part No: 126657)
$5.76
Sediment Bowl Assembly - Large Bowl. 1 8 inch pipe thread to fuel line, 3 8 pipe to tank. For tractor models A, B, 60, 620, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25 inch bowl. This will replace the AUTOMATIC SHUT OFF assembly with a manual shut off for the late A and B models. Replacement bowl available as part S.65504. (Part No: 105393)$20.81
Sediment Bowl Assembly - Cast top with glass bowl, all fuel style for use with 3-way valve. For tractor models AO, AR, B, BO, BR, D, G, GP, H. (Part No: 118722)$45.40
Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1 8 and an overall height of 2 3 8. For the following models using a 2 3 8 inch tall glass bowl: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010, 4030, 4230. Replaces C1777R. (Part No: 105365)$4.99
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3 8 Inch center hole. Replaces: L885T (Part No: 105364)$3.70
Sediment Bowl Screen - 2" -
  • For John Deere tractor models A (Styled & Unstyled), AI (Unstyled), ANH (Styled & Unstyled), AW (Styled & Unstyled), B (Styled & Unstyled), BN (Styled & Unstyled), BNH (Styled & Unstyled), BO (Unstyled), BR (Unstyled), BW (Styled & Unstyled), BWH (Styled & Unstyled), D (Styled & Unstyled), G (Styled & Unstyled), GH (Styled & Unstyled), GM (Styled), GN (Styled & Unstyled), H (Styled), HNH (Styled), HWH (Styled), 50 (Automatic Shut Off), 60 (Automatic Shut Off), 70, 80 (Pony Start Diesel), 520 (Automatic Shut Off), 530 (Automatic Shut Off), 620 (Automatic Shut Off), 630 (Automatic Shut Off), 720, 730, 820 (Pony Start Diesel), 830 (Pony Start Diesel), 840 (Pony Start Diesel)< li>
  • Compatible with John Deere Combine(s) 55< li>
  • Replaces John Deere OEM number AA519R< li> < UL> (Part No: 121909)
$5.36
Single Induction Early Carburetor Kit -
  • For John Deere tractor models A, B, D, G< li>
  • For the following Marvel Schebler Carbs only, please check your number; DLTX5, DLTX6, DLTX8, DLTX11, DLTX13, DLTX16, DLTX24, DLTX31, DLTX38, DLTX51, DLTX7, DLTX18, DLTX19, DLTX24, DLTX33, DLTX39, DLTX53, DLTX3, DLTX6, DLTX16, DLTX63, DLTX5, DLTX15, DLTX17< li>
  • No jets or nozzles< li>
  • Helps complete your carbuteor rebuild< li> < UL> (Part No: 113675)
$46.00
Single Induction Late Carburetor Kit -
  • For John Deere tractor models A, B, 50 (up to sn 5015950), 60 (up to sn 6013899)< li>
  • Replaces John Deere OEM number A258E, AR10075R, R10050R, R10060R, R10078R, 12H64R, 15-223, 21H962R, 21H971R, 21H994R, A765R, R10041R, R10045R, R10049R, R10067R, R10147R, R10151R, R10163R< li>
  • For Marvel Schebler carbs only DLTX67, DLTX71, DLTX72, DLTX73 - Please check your carb number before ordering< li>
  • No jets or nozzles< li>
  • Helps complete your carbuteor rebuild< li> < UL> (Part No: 113674)
$38.00
Throttle Handle - Throttle handle for John Deere models A (after serial #584000) and B (after serial #201000) (Part No: 179396)$48.50
Throttle Shaft -
  • For John Deere tractor models A, B, 50, 60< li>
  • Replaces John Deere OEM number AR10058, DLTX67, DLTX71, DLTX72, DLTX73< li> < UL> (Part No: 126748)
$21.99
Vent Tube and Radiator Overflow Packing - This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Part No: 183845)$10.02
 
Gauges
Amp Gauge - This gauge is white face for tractor models A, B, D, G, H. Amp Gauge. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, white faceplate and a black bezel. Replaces OEM #s AM354T, AB2568R, AB1190R. (Part No: 150258)$24.99
Amp Gauge - For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Part No: 150259)$22.00
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1 4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: 178318)$57.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: 178285)$40.00
Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1 8 inch NPT female to 3 16 inch tubing female. It is used on some gauges without removable fitting. (Part No: 178157)$3.95
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8 inch pipe thread to 1 8 inch tube. Brass. (Part No: 179540)$17.50
Oil Pressure Gauge - For tractor models A, B, D, G, UNSTYLED. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. This oil pressure gauge has a metal base, glass lens and a black bezel. This gauge does not have studs and is designed to screw into the governor or oil filter base. This oil pressure gauge is a mechanical gauge. The measurement of the threaded fitting is 1 8” NPT male thread. Replaces OEM #s Replaces: AM737T, AB292R, AA1730R (Part No: 150255)$22.00
Oil Pressure Gauge - For tractor models A, B, D, G, STYLED. Oil Pressure Gauge without John Deere logo, on white face. With studs. Replaces AB1549R (Part No: 150254)$25.99
Tachometer - This new tachometer fits; A serial number 648000 and up, AO and AR serial number 272000 and up, B serial number 201000 and up, [ 50, 520, 530, 60, 620, 630, 70, 720, 730 (Gas Lp) ], [ 70, 720, 730 (Diesel) ], [ 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Serviceable, Face plate will have the wrong Mph.) ]; Replaces: AB5132R, AB5134R, AF1719R, AF2066R, AF2698R, AR20055R, AR20825, AR20836, AR21661, AR21662, AR21663, AR21663R, AR21664R (Part No: 150247)$110.50
Tachometer Bracket - For tractor models 50, (A from SN# 648000 and above), (B from SN# 201000 and above), (AO, AR from SN# 272000 and above), 60. (Part No: 126741)$43.26
Tachometer Cable - For tractor models 50, (A from SN# 648000 and above), (AO, AR from SN# 272000 and above), (B from SN# 201000), G, 60, (70 gas). Replaces AB4765R, AB4776R. (Part No: 101923)$45.50
Temperature Gauge, AA883R -
  • For John Deere tractor models A (s n 476999-earlier), B (s n 166999-earlier), D (s n 125430-143799), G (s n 12999-earlier), H< li>
  • Replaces John Deere OEM number AA883R, AA3538R< li>
  • Metal Base< li>
  • Glass Lens< li>
  • Black Bezel< li>
  • White Face< li>
  • Lead Length: 23"< li> < UL> (Part No: 150250)
$41.26
Temperature Gauge Black Face -
  • For John Deere tractor models A (styled), D (styled), G (styled), M (mid 1952-later), R (mid 1952-later), 40 (1952-later), 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840< li>
  • Replaces John Deere OEM number AM3950T, AA6295R, AA7263R, AF2192R, AF2774R, AM2444T, AM3092T, AR20783, AT13849T< li>
  • Black Bezel< li>
  • Black Face< li>
  • Lead Length: 48"< li>
  • For temperature gauge with a white face use 150249< li> < UL> (Part No: 150248)
$23.30
Temperature Gauge - White Face -
  • For John Deere tractor models A (styled), B (s n 60000-306600), D (styled), G (styled), M (mid 1952-earlier), R (mid 1952-earlier)< li>
  • Replaces John Deere OEM number AM2444T, AA1342R, AA3534R, AA3535R< li>
  • Black Bezel< li>
  • White Face< li>
  • Lead Length: 48"< li>
  • For temperature gauge with a black face use 150248< li> < UL> (Part No: 150249)
$31.50
Water Temperature Gauge - Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Part No: 150251)$31.26
Water Temperature Gauge - For tractor models A, B, D, G and H. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 3 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5 8 inch 18 NF end with a 1 2 inch NPT pipe bushing. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. OEM #s AA3538R and AA883R. (Part No: 150256)$29.99
Water Temperature Gauge - For tractor models A, B, D, G and H. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 6 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5 8 inch 18 NF end with a 1 2 inch NPT pipe bushing. This gauge has a plain face without a John Deere logo. Can also be used on later models but the face plate color is not correct for tractors after mid 1952. Replaces OEM #s AM610T, AM1609T and AA1342R. (Part No: 150257)$31.50
 
Hitch / Drawbar
Drawbar Pivot Pin - For tractor models 320, (A from SN# 561903 and above), (B from SN# 186134 and above), 50, 520, 530, 60, (620 up to SN# 13099), 40, 330, 420, 430, (M, MT with swinging drawbar). Replaces B2198R. (Part No: 126345)$35.00
Evener Bar Upper Link Knuckle -
  • For John Deere tractor models A, B, G, 50, 60, 70< li>
  • Replaces John Deere OEM number 31583A< li> < UL> (Part No: 126354)
$58.76
HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3 16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5 32 inch, length 2 15 16 inches), four(4) of HP-5 (wire diameter 1 8 inch, length 2 9 16 inches), and three(3) of HP-6 (wire diameter 3 32 inch, length 1 5 8 inches). (Part No: 182461)$10.86
Hitch Ball 10000LB 2-5/16 - 2-5 16 inch ball size, 1-1 4 inch stud thread, 2-1 2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: 178287)$29.50
Hitch Ball 15000LB 2-5/16 - 2-5 16 inch ball size, 1-3 8 inch stud thread, 2-5 8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: 178289)$16.00
Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3 4 inch stud thread, 1-7 8 inch stud length, 3500 lb. max load capacity, one two chrome hitch ball class. (Part No: 157028)$9.80
Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1 8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: 157024)$8.80
Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5 16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: 157017)$12.26
Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8 inch mounting pins and adapter bushings, 27-1 4 inches width, 3-1 2 inch x 3-1 2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. This additional charge will be added to your order. (Part No: 180731)$325.00
Sway Chain Assembly -
  • For John Deere tractor models A (With 800 Lift Kit), B (With 800 Lift Kit), G (With 800 Lift Kit), 50 (With 800 Lift Kit), 60 (With 800 Lift Kit), 70 (With 800 Lift Kit)< li>
  • Replaces John Deere OEM number 14779, 31606A, 31602A, 331603A, DA2632A, DA4560A, RV695A< li>
  • Includes 1 Chain, 1 Large Clevis w Drilled Pin and Cotter Pin, 1 Small Clevis w Drilled Pin and Cotter Pin < li>
  • 2 Used Per Tractor. < li> < UL> (Part No: 126736)
$71.00
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: 112156)$30.26
 
Hydraulic System
Filter Assembly, Hydraulic Oil - 20 GPM Capacity Assembly with 10 Micron Element. 3 4 NPT ports. 4 inch diameter-7-1 2 inches long. Equipped with standard By-Pass Valve-opens at 15 PSI. Includes filter element. Order Replacement Element as part number 1A9021 (Part No: 182540)$33.26
FILTER ELEMENT - 10 Micron replacement element for SF1-10. (Part No: 120092)$9.69
Hydraulic Block-Off (Dummy Plug) - Fits all with locking nut style coupler. Measures 0.685 inches outside diameter, 5.377 inches overall length, For locking nut style coupler. Note: Fits PowerTrol SN # PCV-100 to 67904. Only fits early serial numbers. Later serial numbers use AA4321R. This part replaces AA3762R, AA4980R (Part No: 178584)$49.26
Hydraulic Block Off Plug (Dummy Plug) - Used on Swinging style lever Powr-Trol Serial number PCV-67905 and up. This part has 1 2 inch pipe thread. This part replaces John Deere part numbers AA4981R, AA4321R (Part No: 178972)$46.76
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: 118257)$10.20
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1 2 inch inside diameter. 2 Wire. Solid Male 1 2 inch NPT thread on both ends. (Part No: 179906)$48.52
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1 2 inch I.D. double wire braid (SAE-2R) with 1 2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Part No: 118256)$12.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1 2 I.D. 2 Wire. Solid Male 1 2 NPT thread on both ends. (Part No: 118259)$13.50
Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. There is an additional shipping cost for this product: $5.00 (Part No: 118260)$14.00
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1 2" I.D. double wire braid (SAE-2R) with 1 2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Part No: 118261)$16.26
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: 172285)$14.26
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: 172338)$14.00
 
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 170217)$14.76
Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 114630)$14.20
Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 169771)$7.86
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2 inch diameter, 8 inches overall length, 7-1 4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 173612)$195.00
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2 inch diameter, 8 inches overall length, 7-1 4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 173612)$195.00
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: 161111)$116.00
Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: 180533)$23.00
Hub Assembly - Hub with bushings (3 4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1 4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 180514)$30.80
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5 8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: 182627)$54.00
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 182589)$51.00
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 182592)$89.69
Round Bale Tine 43 Inches - Fully Hardened. (Part No: 182594)$109.34
Round Bale Tine 49 Inches - Fully Hardened. (Part No: 152690)$83.00
Round Bale Tine 55 Inches - Fully Hardened. (Part No: 182593)$128.00
Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 180300)$4.40
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: 107928)$16.50
 
Lights
Bullet Tail Light-12 Volt - This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 12 Volt with Glass Lense. 3 1 2 inches long. Also available in 6 volt, order part number R4384 instead. (Part No: 105310)$42.50
Dash Light - 6 Volt - For JD B, BR, D, AR, R, 70D, 80. (Part No: 105318)$25.99
Headlight - This headlight, sold each, is for models A, AO, AR, B, D, G, H, R, 50, 60, 70. Teardrop Headlight, 12 volt, 5" Diameter. Also replaces AF3816R. (Part No: 105332)$65.00
Headlight, 12 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3144R, AD2450R, AD2451R. (Part No: 178399)$104.00
Headlight, 6 Volt - 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3145R, AD2450R, AD2451R. (Part No: 125712)$86.99
Headlight Lens - Replacement glass lens is 4.75 inch outside diameter for headlamp assemblies AA3075R, AF3817R. For tractor models A, B, D, R, 70D, 80, 820, 830. (Part No: 111330)$13.26
Headlight Reflector - Item is interchangeable with your original and measures 4-1 2 inch measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Part No: 112482)$11.95
Headlight, Teardrop - Teardrop Headlight - 6 Volt - 5 inch Diameter For tractor models A, AO, AR, B, D, G, H, R, 50, 60, 70. Also replaces OEM# AF3817R. Restoration Quality. (Part No: 105331)$47.00
Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Part No: 154899)$4.70
Knob, Light Switch - Work or tail light knob. For tractor models A, B, D, G, R. (Part No: 126172)$9.56
Lens - Lens, combination front or rear light, for 5 inch diameter lights, for light TP-AA3075R on tractors: A, B, D, G, R, 7 0D, 7 20D, 730D, 80, 820, 830. Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R Replaces A2731R (Part No: 111330)$13.26
Light Bracket, Headlight - For tractor models A after SN# 584000, B after SN# 243385. Light Bracket. (Part No: 126504)$42.75
Light Bracket, Rear - For tractor models A from SN# 477000 to 5000011. For B from SN# 60000 to 95999. For D after SN# 143800. Rear Light Bracket. (4244R). (Part No: 180695)$90.00
Light Bracket, Rear - For A from SN# 500012 to 583999. For B from SN# 96000 to 200999. For G from SN# 13000 to 25999. Rear Light Bracket. (Part No: 179822)$78.00
Light Lens - For 7 inch Teardrop Lights. For tractor models A, AO, AR, B, BO, BR, D. Replaces: B1725R (Part No: 150692)$23.26
Light Switch, 3-Position - For tractor models A, B, D, G, H, L, LA. Replaces AB2687R, AF687R, AL2857T. (Part No: 105312)$26.76
Light Switch with Knob - Switch for tractor models A, B, D, G, R. Also replaces AA4982R. (Part No: 114720)$19.69
Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)$75.13
Rear Combo Light 12 V - Fits A after SN 584000, [B, R (When converted to 12 volt)], G After SN 26000. Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Part No: 178256)$90.00
Red Light with Brass Ring - For tractor models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: 150646)$19.76
Ring - Moulding trim ring for headlights or rear lights, for light TP-AA3075R.* Manufactured to restoration standards. For tractor models 70, 720, 730, 80, 820, 830, A, B, D, G, R. (Part No: 124994)$14.50
Tail Light - For A after SN# 584000, G after SN# 26000 12V Tail Light, 5". Picture shows two for clarity but price is for ONE light. (3863R) (Part No: 125673)$70.00
Tail Light - For B after SN# 201000, R. 6 volt, 5 inch diameter Tail Light. Used in combination with the Bullet Tail Light. (3866R) Replaces: AB3549R (Part No: 125718)$71.00
Tail Light, Bullet Shape - For B from SN# 201000 and R. Bullet Tail Light, 6 Volt, with glass lens. (R4384) Replaces: AM1310T, AB3976R, AM1291T (Part No: 105309)$42.50
Tail Light, Combo Light - For tractor models B after SN# 201000, R. 6V Rear Combo Light, 5". Replaces: AB4037R, AB3976R, AB3975R, AA3075R, AA4529R (Part No: 113257)$87.00
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: AD1855R, AD2082R, AD2834R, AD2835R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R (Part No: 150699)$2.30
Tail Light, White - For B after SN# 201000, R. 6 volt, 5 inch diameter. Tail Light used in combination with the Bullet Tail Light. (Part No: 113257)$87.00
Tail Light - with Bullet Tail Light - For A after SN# 584000, G after SN# 26000 12V Tail Light, 5" with Bullet Tail Light. (3864R) AA3075R, AA4529R, AB3975R, AB3976R, AB4037R (Part No: 178256)$90.00
Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1 2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: 173803)$52.50
 
Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. This additional shipping charge will be added to your order. (Part No: 186987)$438.47
Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. This additional charge will be added to your order. (Part No: B257X)$430.31
Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)$110.28
Coupler -
  • For John Deere tractor models A, B, G, M< li>
  • Replaces John Deere OEM number A3134R< li>
  • For Locking Nut Style Coupler< li>
  • 1 2" Pipe Threader< li> < UL> (Part No: 126178)
$46.76
Coupler Cover -
  • For John Deere tractor models A (late), B (late), G (late), R, 50, 60, 70< li>
  • Replaces John Deere OEM number A3255R, A3614R< li>
  • For Swing Style Couplers< li> < UL> (Part No: 110634)
$32.95
Deluxe Canopy, 3 Bow - This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: 178876)$196.10
Gear Shift Ball -
  • For John Deere tractor models A (s n 499000-later), B (s n 150000-later), H (s n 10000-later), 50, 60 (s n 604300-later), 520, 530, 620, 630, 720, 730< li>
  • Replaces John Deere OEM number H717R< li> < UL> (Part No: 126524)
$26.76
Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: 180453)$49.76
Hydraulic Coupler -
  • For John Deere tractor models A, ANH, AO, AR, AW, B, BN, BNH, BW, BWH, G, GH, GM, GN, GW, MC (s n 36948-later), 40, 50, 60, 70, 320, 330, 420, 430, 435, 440, 1010 (s n 42000-earlier)< li>
  • Replaces John Deere OEM number A3613R, AA5535R< li>
  • Powr-Trol s n PCV67905-later< li>
  • Swing style lever coupler< li>
  • Thread: 1 2" Pipe< li> < UL> (Part No: 126179)
$44.76
Hydraulic Coupler & Cover -
  • For John Deere tractor models A, ANH, AO, AR, AW, B, BN, BNH, BW, BWH, G, GH, GM, GN, GW, MC (s n 36948-later), 40, 50, 60, 70, 320, 330, 420, 430, 435, 440, 1010 (s n 42000-earlier)< li>
  • Replaces John Deere OEM number A3613R, A3614R, AA5535R< li>
  • Powr-Trol s n PCV67905-later< li>
  • Swing style lever coupler< li>
  • Thread: 1 2" Pipe< li>
  • Includes: Cover & Coupler< li> < UL> (Part No: 110633)
$79.00
Power Trol Lever -
  • For John Deere tractor models A (sn:477000-later), AO (sn:272000-later (Styled), AR (sn:272000-later (Styled), B (sn:B60000-later), BN (sn:B60000-later), BNH (sn:B60000-later), BW (sn:B60000-later), BWH (sn:B60000-later), G, GN, GW< li>
  • Replaces John Deere OEM number AA3744R < li> < UL> (Part No: 109509)
$51.00
Umbrella Bracket Assembly - For tractor models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Part No: 179139)$108.00
Umbrella Bracket Assembly - For tractor models A, AO, AR, B, BO, BR, D, G, GP, H, L, LA, LI. (Part No: 179958)$76.00
 
Oil System
Engine Oil Pump Strainer - Used on John Deere models: A Serial Number 584000 and up, B Serial Number 201000 and up, 50, 60, 70 gas LP, 630, 730 gas LP, 520, 530, 620, 720 gas LP. (Part No: 164417)$33.00
Engine Oil Pump Strainer Screen - Used on John Deere: A Serial Number 424025-487999, B up to Serial Number 95999, G, AO Serial Number 251486-259999, AI Serial Number 251486-259999, AR Serial Number 251486-259999, BO, BR. (Part No: 164415)$33.00
Oil Filter - Oil filter element, cartridge type 6-7 16" Tall, 3-1 8" Wide. Does not come with seal or gasket. For tractors: A, B, D Serial number 146500 and up, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030. Replaces AA3680R, AR21777R, AR26350, AR28110R (Part No: 109417)$10.60
Oil Level Indicator - This oil level indicator is a replacement for the oil level petcock. Remove the original petcock and replace with this conversion. Has 3 8 inch NPT male fitting. Dipstick is 4.91 inches long. For model early model A series, B, (late model D, DI, W111, W113), G series, H series, R, 50, 60, 70. Originally used as an aftermarket product in the 1940's. (Part No: 1998TA-New)$46.50
Oil Pump Drive Shaft Coupling - For tractor models A series after sn 424025, B series, G series, 50, 60, 70 gas, 520, 530, 620, 630, 720 gas, 730 gas. (Part No: 182803)$24.00
 
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: 183950)$25.26
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100244)$6.00
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100244)$6.00
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102408)$37.00
Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102407)$14.70
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100116)$36.70
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100115)$14.70
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100114)$6.30
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100121)$14.70
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: 100120)$6.10
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108348)$18.00
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108346)$60.00
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 108344)$8.90
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102411)$42.80
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102410)$15.80
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 102409)$6.00
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100119)$34.00
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100118)$14.70
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 100253)$6.00
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Part No: 184741)$63.05
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)$68.39
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)$99.22
 
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8 inch 6 spline Q.D. tractor yoke. 1-3 8 inch round bore with 1 2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3 4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1 16 inch) bearing diameter x 74.6 mm 2.940 (2-15 16 inch) overall length (43-3 4 inch). Verify length before ordering. (Part No: 180775)$206.00
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 inch 6 spline Q.D. tractor yoke, 1-3 8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3 4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1 16 inch) bearing diameter x 74.6 mm 2.940 (2-15 16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: 124815)$295.00
PTO Flipper Guard - (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, (70D with Non-live PTO & Non hydraulics). Replaces: Guard: AA3522R, Pin: F710R, Spring: F711R (Part No: 178326)$34.95
PTO Flipper Guard Spring - For tractor models (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: 115822)$7.49
PTO Oil Seal - Fits John Deere - [A, AH, AN, ANH, AW, AWH (Used as a rear PTO oil seal (serial number 488000-UP)], [AO, AR (Used as a rear PTO oil seal serial number 260000 and up)], [B, BN, BNH, BW, BW40, BWH, BWH40 (Used as a rear PTO oil seal serial number 149700 and up)], [BO, BR (Used as a rear PTO oil seal serial number 333100 and up)], [G, GH, GM, GN, GW (Used as a rear PTO oil seal serial number 43352 and up)], [R, 50, 520, 530, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D (used as a rear PTO oil seal)], 2010 (used as a transmission drive shaft seal), [3010, 4010 (Used as a front PTO oil seal)]; Replaces: AA2296R, AT11888, AT11931, AT16076. (Part No: 152182)$10.16
PTO Safety Clutch, 40 HP - 1-3 8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: 183648)$280.00
PTO Seal - This PTO seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. For tractors equipped with PTO shield and flipper guard casting #B1679R. It Fits: A, AN, ANH, AW, AWH (Up to Serial Number 487999), AO, AR (Serial Number 258330 - 259999), B, BN, BNH, BW, BWH (Up to Serial Number: 149699), BO, BR (Serial Number 331077 - 333099). Replaces: AB2578R, 476838 (Part No: 153586)$22.00
PTO Shaft Oil Seal Housing - Used on John Deere A up to Serial Number 487999 and John Deere B up to Serial Number 149699. This is a new part, made just like the original. Uses AB2578R seal, not included. (Part No: 125634)$155.00
PTO Shield - For A, B, G, LA. For EARLY 50, 60, 70, all with Live PTO & Powr-Trol. PTO Shield replaces #AA2297R. (Part No: 109984)$77.00
 
Seats
Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 178435)$83.00
Arm Rests, Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 110196)$90.00
Backrest, Black - Superior, weatherproofed covers, material identical to cushions. Tee-nuts & cap screws included for easy installation. Holes are pre-set & drilled. Black. For tractor models A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21965R) (19-1 2x5-1 4). (Part No: 101303)$45.00
Pan Seat - This tractor seat is 19 inches wide with nine holes. For A, B, D, G, H, L. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Part No: 101352)$34.26
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V)$1518.86
Seat Back - Yellow, wood back. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P N R0172 if needed. (Part No: 110194)$75.00
Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 179186)$56.00
Seat Back - Black, wood, 6 inches high. For tractor models A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. 16.5 inch bolt spacing. (Part No: 116170)$35.26
Seat Bottom - Durable, weatherproofed leatherette cover & solid one-piece foam filler assure complete customer satisfaction. Seat has a painted wood bottom and 4" foam cushion. Seat is 19.5" X 14.5". For tractor models A, B, G, 50, 60, 70. (Part No: 101300)$62.00
Seat Bottom - *** USE JT77Y *** Yellow, wood back. 191 2" x 14 1 2". For D, G, R, 50, 60, 70 80, 520, 530, 620, 630, 720, 730, 820, 830. For seat back order part R0173. NOTE: If tractor has Float Ride, order p n 0994RTP bottom instead. Picture shows seat back. Not included in price. Order P N R0173 if needed. (Part No: 101300)$62.00
Seat Bottom - Black, wood, 19 1 2 inches x 14 1 2 inches. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: 116729)$91.19
Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3 4 inches deep). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: 180784)$116.00
Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. Price is for a pair (2 pieces). This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Part No: 109602)$3.56
Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. This additional charge will be added to your order. (Part No: 155584)$144.00
Seat, Universal - BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $30 additional shipping per seat due to size and weight. This additional charge will be added to your order. (Part No: 101374)$97.00
Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: 183807)$126.00
Seat, Universal - Seat assembly, black leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 183989)$186.10
Seat, Universal - Seat assembly, blue leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180782)$86.00
Seat, Universal - Seat assembly, yellow leatherette upholstery, dimensions: 18-3 4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward rear adjustment (slide track 9 inches wide x 11-1 4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: 180783)$86.00
Tie-On Seat Cover - Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: 179179)$54.00
Tie-On Seat Cover - Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: 179810)$44.00
Tie-On Seat Cover - Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: 179516)$52.00
Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)$182.49
Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. This additional charge will be added to your order. (Part No: 101375)$97.00
 
Sheet Metal / Body Parts
Battery Base - Use with AA3954R. For A (From S#584000), G (From S#26000). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces original part number AA4013R (Part No: 112487)$55.00
Battery Base - Use with R1521 & R1522 For B (From S# 201000), R, 80, 820, 830 with Pony Motor. Replaces OEM# AR1326R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 126477)$56.80
Battery Box - For model A with Serial Number 584000 and up, G with Serial Number 26000 and up. Also replaces AA4841R, AA4941R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104073)$124.00
Battery Box - This battery box is for a model B with Serial Number 201000 and up, or model R With Pony Start. Replaces OEM# AB3593R, AB4101R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104076)$190.90
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: 165963)$41.19
Clam Shell Fender Bracket Pair - Fits John Deere - A (up to sn 650763), B (up to sn 260983), G (up to sn 41667). Additional $10.00 shipping due to weight. This additional charge will be added to your order.Replaces: LH - A4050R, RH A4049R (Part No: 127037)$197.00
Deluxe Hardware Kit - Includes hardware for: Hood, Medallion (aka nose cone), Grills, Center plate, Radiator shutters and Flywheel cover. It is used on John Deere A serial number 648000 and up, B serial number 275242 and up, G serial number 48608 and up. This is a 102 piece set and contains replacements for John Deere part numbers 12H10, 12H291R, 24H1136, A2181, A4126R, A4668R, B1544R, R20817 (Part No: 126198)$109.00
Fender - Right hand or left hand, fits either side. Clamshell style fender does NOT come with bracket for the following models: A, B, G, 50, 520, 60, 620, 70, 720 Diesel, 630, 730 Diesel. Additional $10 shipping due to weight. This additional charge will be added to your order. Fender measures 27 3 4 tall and 33 inches wide at tallest and widest dimensions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 108307)$138.00
Fender Bracket, Left - For A, B and G. Fender Bracket - Left. Additional $5.00 shipping due to weight. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 110027)$73.50
Fender Bracket, Right - For A, B and G. Fender Bracket - Right. Additional $5.00 shipping due to weight. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 110028)$81.90
Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Part No: 103959)$7.30
Flywheel Cover Guard - Used on John Deere A 477000 - 498999, 1939-1940 4 Speed, AR and AO To serial number 271999. This part should be fit to tractor before painting. (Part No: 126484)$129.99
Flywheel Cover Guard - Used on John Deere B serial number 60000 to 95999, 1939 - 1940 4 Speed. Replaces John Deere part number AB1856R. Fit to your tractor before painting. (Part No: 126486)$129.99
Grill Screen - For one side For B, and H. These ARE PRE-FORMED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 112106)$70.00
Hood Bolt Kit -
  • For John Deere tractor models A (sn:477000 - 586999), B (sn:60000 - 200999)< li>
  • For electric start, long hood tractors only< li>
  • For hood, grilles & battery covers< li> < UL> (Part No: 117519)
$45.76
Hood Patch - Weld-on Style Patch is approximately 7 inches x 7 inches and has a 4-1 4 inch hole. Used when converting to a thru-hood exhaust. Used on A, G, 60. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 113997)$29.95
Pilot Punch Set - Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16 and 1 2. (Part No: 186563)$146.94
Step Pad - For tractor models A, 60, B, 50, G, 520, 530, 620, 630, 70, 720, 730, 80, 820, 830, 2010, 1520, 1530, 2040, 2150, 2155, 2240, 2020, 2510, 2520, 2030, 2440, 3020, 2350, 2355, 2550, 2555, 2750, 2755, 2630, 2640, 4010, 3120, 4020, 2840, 4050, 4000, 4230, 4320, 4520, 4620, 4430, 4240, 4440, 4250, 4255, 5010, 5020, 6030, 8650, 920, 1120, 8850, 2130, 8450, 2120, 1830, 8020. (Part No: 109589)$28.50
Step with Bracket - Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces OEM# A5234R or F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 104024)$60.00
 
Steering
Front Axle Housing Lock Bolt -
  • For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320< li>
  • Compatible with John Deere Harvester(s) 9900< li>
  • Replaces John Deere OEM number B2694R< li>
  • Uses 1" NC Nut< li> < UL> (Part No: 108966)
$22.80
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1 8 inch keyway, 0.9715 inch total width for 1 2 inch belt. (Part No: 164438)$48.76
Spindle - Spindle, LH RH, Dimension A-14.375 inch, B-1.5 inch, C-1.625 inch, D-1.312 inch. Fits A, AO, AR, B, G, GH, 50, 520, 530, 60, 620, 630, 70, 720 All with Factory Wide Fronts only. The wheel bearing kit used on this spindle is kit part number WBKJD1. (Part No: 102209)$305.00
Spindle Bushing - Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 108046)$9.76
Spindle Thrust Washer - This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Part No: 108047)$5.99
Steering Arm - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Left. (Part No: 104951)$193.20
Steering Arm - Left - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Left. Replaces B1236. (Part No: 104951)$193.20
Steering Arm - Right - For A, B, G, 50, 60, 70, all with round tube wide front axle. Steering Arm - Right. Replaces B1236. (Part No: 104950)$189.00
Steering Wheel - 16" diameter, 3 4"-7 8" keyed, stepped hub, 3 flat spokes. For tractor models (B unstyled SN# 1000-59999), BR, BO. (Part No: 101444)$39.00
Steering Wheel - For A, D, G. Steering Wheel. Verify 18 Inch Diameter, Round Spokes, 13 16" Stepped Hub. (Part No: 101439)$43.54
Steering Wheel - For A, D, G. Steering Wheel. 18" Diameter, Flat Spokes, 13 16" Stepped Hub. R3220 (Part No: 101436)$44.20
Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5 8" Diameter, 13 16" Keyed Hub. 2447R (Part No: 101444)$39.00
Steering Wheel -
  • For John Deere tractor models A (s n 476999-earlier), AO (s n 271999-earlier), AR (s n 271999-earlier), D (s n 109944-143800), G (s n 7099-earlier)< li>
  • Replaces John Deere OEM number AA380R< li>
  • 18" diameter< li>
  • 13 16" keyed stepped hub< li>
  • 3 bare metal flat spokes< li> < UL> (Part No: 101437)
$51.50
Steering Wheel Shaft Bushing -
  • For John Deere tractor models A (s n 460000-later), G (s n 47996-later), 60, 70, 620, 720< li>
  • Replaces John Deere OEM number A1910R< li>
  • 1.002" O.D.< li>
  • .940" I.D.< li>
  • 1.725" Long< li> < UL> (Part No: 114892)
$20.50
Steering Wheel Shaft Bushing -
  • For John Deere tractor models B (s n 201000-later), BN (s n 201000-later), BNH (s n 201000-later), BW (s n 201000-later), BWH (s n 201000-later), R, 50, 80, 520, 620, 820, 830< li>
  • Replaces John Deere OEM number B37R< li>
  • 1.739" Length< li>
  • 0.940" Outer Diameter< li>
  • 0.887" Inner Diameter< li> < UL> (Part No: 126725)
$21.00
Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 1.197" Inside Diameter, a 1.700" outside diameter and is 455" Wide. Fits B, BN, BNH, BW, BWH (serial number 60000 and up), (50, 520, 530 with Manual Steering Only) It replaces original part number JD7396 (Part No: 126732)$20.26
Steering Worm Shaft Bearing -
  • For John Deere tractor models A, G< li>
  • Replaces John Deere OEM number JD7205< li>
  • Bore: 1.360"< li>
  • Width: .375"< li>
  • Radius: .14"< li> < UL> (Part No: 126731)
$19.76
 
Tools
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: 183798)$15.60
Castle Nut - 1/2" -
  • For John Deere tractor models A (s n 647999-earlier), AO (s n 273079-earlier), AR (s n 273079-earlier), 50 (s n 5020400-later), 520, 530< li>
  • Replaces John Deere OEM number A335R, 14H994, AA4967R, B3279R< li>
  • 1 2" -20 NF< li> < UL> (Part No: 126122)
$2.30
Castle Nut - 9/16" -
  • For John Deere tractor models A (s n 648000-later), AO (s n 273080-later), AR (s n 273080-later), G, R, 60, 70, 80, 620, 630, 720, 730, 820, 830, 840< li>
  • Replaces John Deere OEM number R20228, 14H862, AD2850R, D2789R< li>
  • 9 16" - 18NF Grade 5< li> < UL> (Part No: 126123)
$1.99
Chain Binder - 1 4 inch chain binder, 2600 pound load limit. (Part No: 178272)$26.26
Chain Binder - 3 8 inch chain binder, 5400 pound load limit. Use with either 5 16 inch or 3 8 inch chain. (Part No: 178290)$33.00
Chain Binder - 1 2 inch chain binder, 9200 pound load limit. Use with either 3 8 inch or 1 2 inch chain. (Part No: 178266)$48.50
Chain Binder - 1 2 inch chain binder, 9200 pound load limit. Use with either 3 8 inch or 1 2 inch chain. (Part No: 178266)$48.50
Clutch Dog -
  • For John Deere tractor models B (s n200999-earlier), H, HNH, HWH< li>
  • Replaces John Deere OEM number B145R< li>
  • Forged like original< li>
  • 3 used per tractor< li>
  • Sold individually< li> < UL> (Part No: 126128)
$58.76
Clutch Dog -
  • For John Deere tractor models B (s n 2000000-later), 50, 520, 530< li>
  • Replaces John Deere OEM number B2351R< li> < UL> (Part No: 126129)
$42.99
Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: 182666)$52.00
Grease Gun - Grease Gun. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: 182665)$70.00
Grease Gun - Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: 157100)$20.00
Grease Gun - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: 178294)$40.32
Grease Gun CLAMP - Clamp holds all 2-1 4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: 178308)$9.80
Grease Gun PowerLuber 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)$134.19
Grease Gun PowerLuber 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)$288.95
Grease Gun PowerLuber 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)$403.25
Grease Hose 18 Inch - 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: 157114)$7.86
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: 180261)$275.00
Pressure Plate Spring Washer -
  • For John Deere tractor models A, B, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 840< li>
  • I.D. 0.572 < li>
  • O.D. 0.937< li>
  • Thickness 0.035< li>
  • Steel Spring< li> < UL> (Part No: 126159)
$3.56
Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 185142)$153.00
Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 179619)$153.00
Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004)$110.33
Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 179618)$197.00
 
Wheels
Bearing Cone - For tractor models 50, 60, 70, A, BW, D, G. (Part No: 179949)$26.90
Bearing Cone - BEARING CONE For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Part No: 109633)$20.60
Bearing Cone - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 179943)$53.70
Bearing Cone - Outer bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Part No: 172510)$9.70
Bearing Cone - Outer bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 50, 60, 70, A, BW, D, G (Part No: 180091)$27.00
Bearing Cone - Inner bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: 179943)$53.70
Bearing Cup - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 179944)$10.86
Bearing Cup - Outer bearing cup. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Part No: 180095)$6.00
Bearing Cup - Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Part No: 121350)$19.76
Bearing Cup - BEARING CUP For 50, B, BO, BR (Part No: 180095)$6.00
Bearing Cup - BEARING CUP For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH (Part No: 118705)$16.50
Bearing Cup, Inner - For tractor models A series excluding AN, BW, D, G series~ 50~ 60~ 70, 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 179944)$10.86
Clamp Lock Nut - 3 4-16 thread, fits front wheel on B, M, MT, 40, 420S, 420T, 1010 & 2010. For 1010, 2010, 40, 420S, 420T, B, M, MT (Part No: 111996)$14.00
Clamp Lock Nut - 1-14 thread, fits front wheel on A, D, G, R, 50, 60, 70, 3010 & 4010. For 3010, 4010, 50, 60, 70, A, D, G, R (Part No: 111995)$17.76
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. Replaces: JD1293, JD3039 (Part No: 103768)$118.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. This additional charge will be added to your order. (Part No: 116854)$65.00
Spindle Dust Shield -
  • For John Deere tractor models A, AO, B, BN, BNH, BWH, G, GH, GN, GW, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320< li>
  • Compatible with John Deere Harvester(s) 9900< li>
  • Replaces John Deere OEM number B2693R, 4020KR< li>
  • Used with AR50962 and AR50963 knees< li> < UL> (Part No: 110385)
$11.26
TIRE GAUGE - Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: 184436)$13.50
Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braided flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: 172349)$40.26
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 118299)$14.30
Tire, Three Rib - Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. This additional charge will be added to your order. (Part No: 650X16)$105.53
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: 118295)$18.75
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: 178959)$51.00
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: 178957)$69.00
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: 158249)$63.25
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: 178895)$109.00
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: 184736)$69.88
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Part No: 183819)$79.42
Wheel Bearing Kit - For A, B, D, G, 50, 520, 60, 620, 70, 720, 730, (AO, AR, GH, 530, 630, all with Factory Wide Fronts ONLY). Wheel Bearing Kit for 1 Wheel. Kit contains 1 each of the following p n 3383, 3320, 2785, 2720, D636R; which cross to the numbers JD7270, JD7224, JD7266, JD7216, D636R. (Part No: 102226)$113.00
Wheel Stud - Wheel stud measuring 1 2 x 1 1 2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A, For the following tractors: A, B, G, M, 50, 60, 70, 630, 730, MI, MT, 320, H, R, 40, 80, 330, 420, 430, 520, 530, 620, 720, 820, 830, 1010, 1020, 1520, 2010, 2020, 2030, 3010, BW, BWH (Part No: 111560)$3.60
Wheel Stud - Wheel stud measuring 1 2 x 1 1 2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A (Part No: 111560)$3.60





PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy