Low Prices - Fast Shipping - Thousands of Items in Stock!

Secured by SSL	Order online or call (800) 853-2651

• Tractor Parts • Manuals • Videos & DVDs • Hats • Books Featured Item    PTO Overide Clutch • Contact Us • Shipping Rates • Return Policy • Ordering Help • Company Info • Parts Warranty • Tractor Info    (YT Home)

John Deere 70 Parts [ Show All Pictures ]   Brakes Brake Lining Kit - Fits R, 70, 80, 520, 530, 620, 630. Does NOT fit High-Crop Models. Includes: 4 linings with 40 rivets. (Part No: AR604R) $49.05 Brake Linings With Rivets - For 60, 620 HI-CROP, 620 ORCHARD, 630 HI-CROP, 630 ORCHARD, 70 HI-CROP, 720 HI-CROP, 730 HI-CROP, A AFTER SN 410000, AO AND AR AFTER SN 250000, G, GH, GN, GW. Brake Linings with rivets. Includes (4) linings and 32 rivets. (Part No: AA4253R) $28.12 [Show Picture]   Clutch Clutch Cover - For A after S N 648000, G after S N 13804, 60, 620, 630, 70, 720, and 730. Not painted. Springs available as p n R5071 for $16.88 per spring, three required. Specify in comments section if needed. (Part No: F821) $30.00 [Show Picture] Clutch Drive Disc - 20 tooth, 6 spline, 9.940 inch diameter. For Models: 70, 720, 730. (Part No: F1228R) $116.00 [Show Picture] Clutch Drive Disc, Sliding - Sliding Drive Disc is 20 spline, 10 inch O.D. For models 60, 620, 630, 70, 720, 730 tractors. (Part No: A4355R) $62.46 [Show Picture] Clutch Facing - Pulley clutch facing. Floating. For A, G, 60, 70, 620, 630, 720, 730. 10 inch outside diameter, 6-3\4 inch inside diameter, 1.575 inch wide, .15 inch thick. For 60, 620, 630, 70, 720, 730, A, G. PRICE IS FOR ONE CLUTCH FACING. MUST BE ORDERED IN QTY OF 2. (Part No: TP-C614R) $13.50 [Show Picture] Clutch Facing, Pulley - Replaces AA5082R. Fits 60, 620, 630, 70, 720, 730. (Part No: AA6129R) $44.90 [Show Picture] Clutch Plate, Power Shaft w/ Facing - 1.40" ID, 5.00" OD .290" thickness. For Models: (50 s n 5032350 and up), 520, 530, 620, 630, (70 s n 7039400 and up), (720, 730, 80, 820, 830. (Part No: RE29794) $28.29 [Show Picture]   Cooling System Fan Belt - Drive belt for Generator and water pump. For A, AO, AR, 60 up to s n 29999, 70 up to s n 8099. (Part No: TP-A4287R) $22.82 [Show Picture] Radiator Cap - For Models: 50 S N 5016616 and later, 60 Regular S N 6030927 and later, 60 Standard S N 6043000 and later, 70, 70 Diesel, 80, 420, 430, 435, 440, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830, 840, 1010, 8020. (Part No: 400065) $20.24 [Show Picture] Radiator Cap, Pressurized - For Models: 50, 60, 70, 80, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830, 1010. (Part No: AA5757R) $13.00 [Show Picture] Radiator Core - For Models: G (with water pump after S N 60700), 70, 720, 730 ALL with gas engines. Radiator Core 21 1 2" H x 21 1 2" W x 2 1 8" D.Gasket set available as part R2180G $17.68. (Part No: AF1321R) $236.69 Radiator Core - Radiator Core - Styled G with S N 1300 and up, 70, 720, 730, 80, 820, 830. Gasket available as part #F661R $4.79 (2 req'd).Please put in comment section. (Part No: AF643R_) $232.64 [Show Picture] Water Pump - For Models: 2280, 2420, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 400, 401, 440, 440A, 440B, 480, 70, 70D, (1020, 1520, 1530, 2030, 2440, 820, 830, all with Diesel Engines), 2020 DSC, (2040, 2240, both with Diesel S N under 349999). Water Pump with gasket. Replaces casting numbers R41039, R55758, AR67452, AR55094. (Part No: RE19944) $159.98 [Show Picture]   Decals and Emblems Decal, Fear This JD Jumping Deer - Yellow and black, 12-1 2 x 3. For all Models. (Part No: S.67829) $20.50 [Show Picture] Decal, Fear This JD Landing Deer - Yellow and black, 12-1 2 x 3. For all Models. (Part No: S.67828) $20.50 [Show Picture] Front Grill Name Plate - Says 'John Deere'. For Model 40, 50, 60, 70, 80, Late R, Early 420. Replaces OEM# AA5383R. (Part No: R1964) $40.92 [Show Picture] Loader Decal, Black - Universal John Deere loader decal, 2" x 24". (Part No: JDL2B) $14.63 [Show Picture] Loader Decal, Black - Universal John Deere loader decal, 2" x 24". (Part No: JDL2B) $14.63 [Show Picture] Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Part No: JDL2Y) $14.63 [Show Picture]   Drive Train Dog, Clutch - For Models: 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. (Part No: C74R) $16.86 [Show Picture] Flywheel Cover Inspection Plate - For Models: A, B, 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: AB3579R) $27.90 [Show Picture]   Electrical System (Starters, Generators, Coils, Wiring, etc.) Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR) $0.00 Battery Cable - Battery Cable for models A to s\n 584000\up, B s\n 201000\up s\n 26001\up, 50, 60, 70D, 520, 620, 720D & 730D w\cranking eng. 0 gauge, length 64", terminal type 1-3. (Part No: TP-AB3546) $30.42 [Show Picture] Battery Cable - Battery Cables: 70, 720G, 1 guage, length 73, terminal type 1-3*. For 70, 720 (Part No: TP-AF1754R) $26.41 [Show Picture] Battery Strap - Battery Ground Straps. A to s\n 676000\up, B s\n 286910\up, G s\n 51143\up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 1 guage, length 6-1\2, terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Part No: TP-AB4100R) $9.84 [Show Picture] Coil Bracket - Universal Coil Bracket (Part No: R1940) $4.95 [Show Picture] Coil, 6V - Distributor coil, 6 volt. Delco Remy equipped. For models: B, M, 40, 50(after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M (Part No: TP-AM373T) $20.56 [Show Picture] Coil, Heavy Duty - 6 Volt - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011) $33.92 [Show Picture] Coil, High Performance - Pertronix ''Flame Thrower'' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $33.92 [Show Picture] Coil, High Performance (Chrome) - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $34.63 [Show Picture] Coil, High Performance (Chrome) - 12-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $34.63 [Show Picture] Coil, Ignition 12V - Distributor coil, 12 volt For models: A series, G, 50 to s n 5021479, 60, 70, except LP. Not for models with a magneto. (Part No: TP-AA4983R) $20.86 [Show Picture] Distributor - Wico B-4 - For Models: 70, 720, 730, 80, 820, 830 FOR PONY STARTING MOTOR ENGINE. Wico Model B-4 Distributor, complete, new. (Part No: AR1370R) $311.85 [Show Picture] Distributor Cap - 2 Cylinder, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o'clock and 3:00 o'clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Part No: 1935038) $6.99 [Show Picture] Distributor Cap, Vertical, 6 Volt - Distributor cap, 2 cylinder, vertical, Please note the orientation of the 2 non-plugged terminals on top of the distributor cap (click 'enlarge image'), there are two different orientations available (see Part No: 1935038 for the other orientation). Fits: A, B, G, M, 320, 330, 40, 420, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 1909008) $6.99 [Show Picture] Distributor Dust Cover - Fits early Delco distributor with clip held cap. For Models: A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Part No: 1900119) $11.50 [Show Picture] Electronic Ignition Conversion Kit - For Tractor Models: M gas, w Delco 1111709; 40, 320 and 330 gas w Delco 1111709, 1112571; 50, 60 and 70 LPG w Delco 1111418; 420, 430 and 440 gas w Delco 1112571. For 12 Volt, NEGATIVE ground system. (Part No: 1123) $91.49 [Show Picture] Electronic Ignition Conversion Kit - For Models: 50, 60 and 70 Gas w Delco 1112569; 520 and 530 Gas w Delco 1112569; 60, 70, 620, 630, 720, 730 Gas w Delco 1112576. Electronic Ignition Conversion Kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Part No: 1122) $91.49 [Show Picture] Electronic Ignition Conversion Kit - Use on the following tractors: 50, 60, 70, 520, 530, 620, 630, 720, and 730 with 2-cylinder gas engine using Delco distributor # 1112569 or 1112576. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 12 volt POSITIVE ground systems. (Part No: 1122P12) $90.88 [Show Picture] Electronic Ignition Conversion Kit - Use on the following tractors: M, 40, 320, 330, 420, 430, and 440 with 2-cylinder gas engine using Delco distributor # 1111709 or 1112571 or 50, 60, 70, with LPG engine using distributor 1111418. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 6 volt POSITIVE ground systems. (Part No: 1123P6) $91.65 [Show Picture] Ignition Kit, Delco Clip-Held Distributor Cap - Contains Points, gauge, condenser. For: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010(to 42000), 2010(to 42000), 3010 (to 1E32999), 4010(to For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M (Part No: ATK1DC) $6.98 [Show Picture] Ignition Kit, Delco Clip-Held Distributor Cap - Contains points, condenser, rotor, and proper point gap gauge. For: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010(to 42000), 2010(to 42000), 3010 (to 1E32999), 4010(to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. (Part No: ATK1DCR) $9.76 [Show Picture] Ignition Tune Up Kit - Ignition tune-up kit for John Deere tractors with 2 cylinder gas engines. Contains: Spark plugs, heavy duty points, condenser, rotor, and gap gauge. Using 7\8-18 thread, 5\8 reach, 15\16 hex spark plug. For Delco distributor thru 1963. Fits tractors: 4 For 320, 330, 40, 50, 520, 530, 60, 620, 630, 70, 720, 730 (Part No: JTTK3) $19.00 [Show Picture] Ignition Tune Up Kit - Ignition tune-up kit for John Deere tractors with 2 cylinder gas engines. Contains: spark plugs, heavy duty points, condenser, rotor, and gap gauge. Using 18m, 1\2 reach, 7\8 hex spark plug. For Delco distributors thru 1963. Fits tractors: 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: JTTK4) $14.80 [Show Picture] Magneto Cap, 2 Cylinder - For models using WICO XH magneto ONLY. (Part No: 1006501) $53.59 [Show Picture] Solenoid, 6 Volt - 3 terminal, Delco starters 1107466, 1107474. (Part No: DR1465) $16.98 [Show Picture] Spark Plug Covers - For Models: 50 S N 5018449 and earlier, 60 S N 6035399 and earlier, 70 S N 7012349 and earlier. Left Hand Side (Part No: A4589R) $43.54 [Show Picture] Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: CPN12259) $12.58 [Show Picture] Spark Plug Wire Set, Universal, 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $16.46 [Show Picture] Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER) $0.00 Starter Switch - Starter Switch button type For 50, 60, 70, A, B, G, R. (Part No: 820052) $8.64 [Show Picture] Starter Switch - Replaces; 193D496. For Models: 520, 530, 620, 630, 70, 720, 730. (Part No: 1930496) $11.97 Switch Starter - Switch, starter, with side screw terminal for tractors: 50, 60, 70, 520, 620, 720. (Part No: 1932850) $7.98 [Show Picture] Tune Kit - For John Deere tractors with 2 cylinder gas engines Using 7 8"-18 thread reach, 15 16 hex spark plugs. For Delco distributor thru 1963. Fits tractors 40, 50, 6 0, 70, 320, 330, 520, 530, 620, 630, 720, 730. Includes: Spark plugs, heavy duty points, condenser, rotor, and gap gauge, universal spark plug wires, and vertical distributor cap. FOR 12 VOLT SYSTEMS. (Part No: JTTK13-12V_) $38.57 [Show Picture] Tune Kit - Tune Kit - For John Deere tractors with 2 cylinder gas engines Using 18mm, 1 2'' reach, 7 8'' hex spark plugs. For Delco distributor thru 1963. Fits tractors 50, 60, 70, 520, 530, 620, 630, 720, 730. Includes: Spark plugs, heavy duty points, condenser, rotor, and gap gauge, universal spark plug wires, and distributor Vertical cap. FOR 12 VOLT SYSTEMS. (Part No: JTTK14-12V) $34.37 [Show Picture] Tune Kit - For John Deere tractors with 2 cylinder gas engines Using 7 8"-18 thread reach, 15 16 hex spark plugs. For Delco distributor thru 1963. Fits tractors 40, 50, 60, 70, 320, 330, 520, 530, 620, 630, 720, 730. Includes: Spark plugs, heavy duty points, condenser, rotor, and gap gauge, universal spark plug wires, and distributor cap. FOR 6V VOLT SYSTEMS. (Part No: JTTK13-6V*) $38.57 [Show Picture] Tune Kit - Tune Kit - For John Deere tractors with 2 cylinder gas engines Using 18mm, 1 2'' reach, 7 8'' hex spark plugs. For Delco distributor thru 1963. Fits tractors 50, 60, 70, 520, 530, 620, 630, 720, 730. Includes: Spark plugs, heavy duty points, condenser, rotor, and gap gauge, universal spark plug wires, and distributor cap. FOR 6V SYSTEMS. (Part No: JTTK14-6V) $38.01 [Show Picture] Voltage Regulator - 6 volt. For Models: A, 55, 60, 70, 95 tractors. (Part No: 1118790) $35.88 [Show Picture] Voltage Regulator, External - For 12V A, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, all using generator 1100309. Replaces regulator 1118792. Saddle Mount (Part No: VR1820) $35.33 [Show Picture] Voltage Regulator, External, 6-Volt - For M, 40, 70, 320, 330, 420, 430, 440, all using 6V generators 1101852, 857, 859. Replaces regulators VR1814, 1118291, 308, 780. (Part No: GDR6003_) $24.95 [Show Picture]   Engine Bearings Rod Bearing - For 70, 720, 730, all with Diesel Engine. Rod Bearing - 2 REQUIRED PRICE IS FOR 1 PAIR. Available in Standard, .010 or.020. Specify in comments section which size required when ordering. (Part No: CB644P) $39.90   Engine Gaskets Flywheel Housing Gasket - For Models: 540G, 5410, 5420, 5420N, 544C, 544D, 548D, 5500, 5500N, 550B, 5510, 5510N, 5520, 5520N, 555, 555A, 555B, 570B, 590D, 595D, 610B, 610C, 6200, 6200L, 6300, 6300L, 640, 6400, 6400L, 640D, 640E, 640G, 648D, 6500, 6500L, 655, 655B, 670A, 670B, 672A, 672B, 690D, 690E, 693D, 70, 70D, 710B, 710C, 710D, 7200. (Part No: R97351) $14.42 [Show Picture]   Engine Overhaul Kits Engine Major Overhaul Kit - Made by TISCO. For Models: 940, 2130, 2350, 2355, 2355CS, 2360, 2535, 2550, 2555CS, 2730, 2735, 3330, 3430, 6602, 70, 70D, 210C, 310D, 310C, 315C, 400G, 415B, 415C, 490, 515B, 34, 44, 45, all with 4.239D Diesel, 300 Series 4 cylinder, 4.19" Bore, 1.375" pin. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings Bushings Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Thrust Bearing Size of Standard, .010, .020 or.030, Connecting Rod Bearing Size of Standard, .010, .020, or.030. Camshaft Bushing of out dia.020 O S or in dia.020 O S, and specify conn. Rod (m)R51727, use R74194. (Part No: AT86992) $931.35 Rebore Kit - DIESEL - STD - Piston Kit For 70, 720 and 730 DIESEl. 6 1 8" bore STANDARD. Contains pistons, rings, pins, and retainers. (Part No: R2034) $614.31 [Show Picture] Rebore Kit - DIESEL -.045 - Piston Kit For 70, 720 and 730 DIESEl. 6 1 8" bore.045 oversize. Contains pistons, rings, pins, and retainers. (Part No: R2466) $614.31 [Show Picture] Rebore Kit - DIESEL -.090 - Piston Kit For 70, 720 and 730 DIESEl. 6 1 8" bore.090 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1990) $614.31 [Show Picture] Rebore Kit - DIESEL -.125 - Piston Kit For 70, 720 and 730 DIESEl. 6 1 8" bore.125 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1991) $614.31 [Show Picture]   Engine Parts Balancer Shaft - Left - For Models: JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Left Hand. (Part No: AR61352) $122.49 Balancer Shaft - Right - For Models: JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. Balancer Shaft - Right Hand. (Part No: AR61351) $122.49 Balancer Shaft, LH - This shaft is not the style that has the weight bolted on. For Models: JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Part No: RE26283) $122.49 [Show Picture] Balancer Shaft, RH - This shaft is not the style that has the weight bolted on. For Models: JD480B, 1830, 2020, 2030, 210C, 2130, 2250, 2270, 2280, 2320, 2360, 2420, 2420, 2440, 2510, 2520, 290D, 300D, 310A, 310B, 310C, 310D, 315C, 315D, 3300, 3430, 3830, 400G, 401B, 401C, 401D, 410, 410B, 415B, 450C, 450D, 455D, 480C, 482C, 70, 70D. (Part No: RE26282) $122.49 [Show Picture] Flywheel Ring Gear - For Models: 70, 720, 730 all with gas engines. (Part No: F1227R) $114.04 Flywheel Ring Gear - 168 teeth. For Models: (A s n 477000 to 583999), (AO, AR up to s n 271999), (G, 70, 720, 730 diesel). (Part No: A2238R) $114.04 [Show Picture] Heat Exchanger - For Models: 60, 620, 630, 70, 720, 730. Replaces BMD# BH-A4644R. (Part No: A4644R) $20.57 [Show Picture] Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve Kit) $0.00   Engine Pistons and Sleeves Piston Pin Bushing - For Model: A w rod no. A2344R, G, 60, 70, 620. (Part No: 828764) $36.88   Engine Rings Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32in.), 4. Number and size of oil rings for each piston (Ex: (1) 5 32in.). (Part No: RING SETS) $0.00   Exhaust System Exhaust Chrome Curved Stack - Chrome For Unstyled A, G, 60, 70, 620, 630, 720, 730. 4 inch outside diameter, 24 inch in length. (Part No: R3551) $120.12 [Show Picture] Exhaust Chrome Straight Pipe - Chrome Pipe with 4 bolt flange is 4" O.D. Length 24". For Unstyled A, G, 60, 70, 620, 630, 720, 730 (Part No: R3550) $101.64 [Show Picture] Heat Exchanger - For Models:60, 70, 620, 630, 720, 730. (Part No: A4664R) $20.67 Heat Exchanger, Clamp - Clamp w stud and nut, use with B3213R & A4664R heat exchangers. (Part No: A4645R) $8.42 [Show Picture] Muffler - Unstyled (no dent) For Models: A, G, 620, 70, 720. Replaces AF3770R. (Part No: AA300R) $51.97 [Show Picture] Muffler, Vertical - Vertical muffler with dent, round body 4-Bolt Base plate, 2-1\2in. exhaust OD, ~ 24-1\2in. total length~ 3-3\4 body diameter. For tractor models: (A, AR, AN, AW, AWH all 1933-1952), G (s n 410000> 1938-1953) , 60, 70, 620, 720 (gas & all fuel). Replaces AF3770R and R21826. (Part No: AA2214R) $38.52 [Show Picture] Straight Pipe - Stainless Steel. For Models: Unstyled A, G, 60, 70, 620, 630, 720, 730. (Part No: R3549) $110.88 Vertical Muffler - With inlet I.D. plate. Outlet O.D. is 2-5 8", Length is 21". OVAL SHAPED. For Models 60, 620, 630, 70, 730 Gas; and for diesel Models 70, 720, 730. (1084R) (Part No: AR20450R) $46.72 [Show Picture]   Fuel System / Air Intake Carburetor Bowl - Fits double barrel DLTX model Marvel Schebler carburetors. For Models: 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: A5173R) $33.00 Carburetor Float - For 50, 60, 70, 520, 530, 620, 720, 530, 630, 730. Carburetor Float. (Part No: AR10069) $29.17 [Show Picture] Carburetor Kit, Basic - Kit for Marvel DLTX75, DLTX83, DLTX86, DLTX96, DLTX105, DLTX99, DLTX81, DLTX84, DLTX82, DLTX102, DLTX97, DLTX94, DLTX106, DLTX85, DLTX101, DLTX98, DLTX95 carbs used on 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: MS105) $24.00 [Show Picture] Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Comes with VITON needle float valve. Carburetor manufacture numbers: DLTX81, DLTX82, DLTX84, DLTX85 and AA5344R, For 60, 620, 630, 70, 720, 730 (Part No: BK35V) $27.62 [Show Picture] Carburetor, Rebuilt - Rebuilt carburetors are sometimes hard to keep in stock. We will try to fill your order whenever possible and as quickly as possible. Please allow up to one week for shipping of a rebuilt carb. If you have a good core, we can rebuild yours. Turn around time is about 1 week and you do not have the core charge. Call us for order information if you would like to send in your core. Rebuild cost does not include float. (Part No: CARBNOTE) $0.0 Carburetor, Rebuilt - Fits 70, 720 - replacement for OEM DLTX81, DLTX82, DLTS84, DLTX85, DLTX95. Add $100.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1522-CARB) $260.10 Choke Cable - Universal choke cable 72 inches long, 7 16 inch thread dia. (Part No: CC72) $9.99 [Show Picture] Choke Knob - For Models: A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: B1951R) $21.70 [Show Picture] Fuel Filler Grommet - 2-1 2" ID, 4-1 2 OD. For Models: early 50, 60, 70 and 60, 620, 630 orchard models. (Part No: A5137R) $25.00 Fuel Filter Canister - 2 required per tractor. For Models: R, 70, 80, 720, 730, 820, 830. Diesels. (Part No: R473R) $30.00 [Show Picture] Fuel Strainer - Large Bowl. For Models: A, B, 60, 620, 630, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25" bowl. (Part No: S.61581) $25.10 [Show Picture] Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $33.66 [Show Picture] Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $59.99 [Show Picture] Grommet, Fuel Filler, Black - For Models: 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7 8 inch outside diameter, 2 1 4 inch inside diamter, and 3 1 2 inch diamter on underside lip. (Part No: A5157R) $19.00 Speed Control Plate w/ Linings - For Models: 50, 60, 70, (520 up to s n 5208099), (620 up to s n 6213099), (720 up to 7214899). Replaces R227852. (Part No: AA6077R) $26.25 [Show Picture]   Gauges Amp Gauge - For: A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. Gauge has 'JOHN DEERE' printed on a Black Face. Replaces AF2749R. (Part No: R3803) $25.18 [Show Picture] Hourmeter, Analog - 2", black, 12-24 volt. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $43.74 [Show Picture] Oil Pressure Gauge - Complete assembly w oil tube and mounting hardware, Lighted. 80 psi. (Part No: SSW0002) $10.95 [Show Picture] Oil Pressure Gauge - For 50, 60, 70, 520, 530, 620, 630, 720, 730, all gas engines. Oil Pressure Gauge with 'JOHN DEERE' printed on Black Face. Comes with studs. (3801R) (Part No: AF2752R) $25.18 [Show Picture] Water Temperature Gauge - For 50, 60, 70, 520, 530, 620, 630, 720, 730. Water Temperature Gauge with 'JOHN DEERE' printed on Black Face. Comes with 36" Lead. (Part No: R3813) $29.93 [Show Picture] Water Temperature Gauge - For 50, 60, 70, 520, 530, 620, 630, 720, 730. Water Temperature Gauge with "JOHN DEERE" printed on Black Face. Includes 72" Lead. (Part No: R3814) $31.97 [Show Picture]   Hitch / Drawbar Drag Link Sleeve - For 60, 70, 620, 630, 720, 730 with Adjustable Round Front Axle. OEM# C838R, C840R (Part No: R3851) $87.78 [Show Picture] Drawbar Lock - For CAT I drawbars only ( drawbars that are 1in. thick x 2-1 2in. width) . Prevents drawbar from rotating. (Part No: 49A29) $26.72 [Show Picture] Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. (Part No: HF141101) $255.69   Lights Lens - Lens, combination front or rear light, 5 diameter, for light TP-AA3075R on tractors: A, B, D, G, R, 70D, 720D, 730D, 80, 820, 830.* Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R (Part No: TP-A2731R) $28.38 Light Bracket - For 50 after S N 5002931, 60, 60 Standard after S N 6043000, 60 LP after S N 6026000, 70, 720. Light Bracket. (4387R) (Part No: A4465R) $38.42 [Show Picture] Light Switch w/ Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $24.50 [Show Picture] Rear Combo Light - For 50, 520, 530, 60, 620, 630, 70, 720, 730 - ALL GAS. 70, 720, 730, 820, 830 - ALL DIESEL WITH ELECTRIC START. 12V Rear Combo Light, 5". (3869R) (Part No: AA5199R) $78.99 Rear Combo Light - For 70, 720, 730, 80, 820, 830 - ALL WITH DIESEL WITH PONY MOTOR. 6V Rear Combo Light, 5". (3870R) (Part No: AF3088R) $78.99 Red Light w/ Brass Ring - For Models: A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AA925R) $13.80 [Show Picture] Ring - Moulding trim ring for headlights or rear lights, for light TP-AA3075R on tractors: A, B, D, G, R, 70D, 720D, 730D, 80, 820, 830.* Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R (Part No: TP-AA3241R) $24.24 Work/Tail Light - 2 wire connectors. For Models: 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AR77326) $65.86 [Show Picture]   Miscellaneous Cab Foam Kit - With Headliner 7-Piece - Black For Models with 1300 Series Hiniker Cab (Part No: R1235) $239.90 Cab Foam Kit - With Headliner 10-Piece - Black For Models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Part No: R1236) $264.89 [Show Picture] Cab Foam Kit - 7-Piece - Black For Models with Hinson Cab. (Part No: R3247) $238.86 CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof Extension Cables. (Part No: CC7M1C) $335.61 [Show Picture] Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately. (Part No: B257X) $402.16 [Show Picture] Canopy Mounting Kit, 2 Post - Mounts the canopy to all our 2 post ROP frames except EMF1 (Hoop Type Frame). (Part No: B6603) $51.48 [Show Picture] Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $38.28 Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $77.88 Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. (Part No: B257XSTD) $292.51 [Show Picture] Deluxe Canopy, 3 Bow - Red. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $153.92 [Show Picture] Deluxe Canopy, 3 Bow - Yellow. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100Y) $153.92 [Show Picture] Deluxe Canopy, 3 Bow - Blue. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100B) $153.92 [Show Picture] Deluxe Canopy, 5 Bow - Red. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504R) $199.90 [Show Picture] Deluxe Canopy, 5 Bow - Yellow. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504Y) $199.90 [Show Picture] Deluxe Canopy, 5 Bow - Blue. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504B) $199.90 [Show Picture] Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $106.60 [Show Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: 60, 620, 630, 70, 720, 730. (Part No: 1212356) $299.95 [Show Picture]   Oil System Oil Filter - Oil filter element, cartridge type. For tractors: A, B, D, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030 gas, crankcase. (Part No: TP-AR26350) $9.39 [Show Picture] Oil Pump Shaft - Late style w o keyway. For All Models s n up to 214999 w 6.404D early power booster 6 cyl engine. (Part No: R64568) $106.70 [Show Picture]   PTO Brake Plate, (PTO) - With facing. For Models: 50, 60, 70, 520, 530. Replaces RE20726. (Part No: AA5284R) $43.12 [Show Picture] Clutch Disc, (PTO) - With Facing. For Models: 50 (>s n 5032350), 60, 70 (>s n 7039400), 80, 520, 530, 620, 630, 720, 730, 820, 830. Replaces RE29784. (Part No: AR1294R) $21.50 [Show Picture] Clutch Drive Disc (PTO) - 3.375" ID, 5.625" OD, .06" thickness, 6 tangs. For Models 50, 60, 70, 520, 530, 620, 630, 720, 730. Price is for each, you may need more than one depending on your application. (Part No: A5145R) $10.90 [Show Picture]   Paint Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $39.97 Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $18.73 Paint, Aluminum, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $8.02 Paint, Classic Green, 1 Gallon - For 2 cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215GAL) $39.97 Paint, Classic Green, 1 Quart - For 2-cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215QT) $18.73 Paint, Classic Green, Aerosol, 6 Cans - For 2 cylinder JD, spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215SP) $5.19 Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $39.97 Paint, Gloss Black, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $5.19 Paint, Green, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210GAL) $47.93 Paint, Green, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210QT) $21.52 Paint, Green, Aerosol, 6 Cans - Shipped in pkg of 6 cans. Price shown is per can. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210SP) $7.86 Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530GAL) $64.18 Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530QT) $27.22 Paint, Industrial Yellow, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530SP) $7.86 Paint, JD Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190GAL) $39.97 Paint, JD Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190QT) $18.73 Paint, JD Yellow, Aerosol, 6 Cans - Shipped in pkg of 6 cans. Price shown is per can. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190SP) $5.19 Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $39.97 Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $18.73 Paint, Satin Black, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $5.19 Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $39.97 Paint, Soft Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200QT) $18.73 Paint, Soft Black, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $5.19   Seats Arm Rests - Pair - Yellow Vinyl on Wood Cushion Only For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1187) $40.73 [Show Picture] Arm Rests - Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1188) $68.07 [Show Picture] Arm Rests - Pair - Black Vinyl on Wood Cushion Only For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1189) $40.73 [Show Picture] Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1190) $68.07 [Show Picture] Backrest, Black - Superior, weatherproofed covers, material identical to cushions. Tee-nuts & cap screws included for easy installation. Holes are pre-set & drilled. Black. For Models: A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21965R) (19-1\2x5-1\4). (Part No: JT300B) $25.42 [Show Picture] Backrest, Yellow - Superior, weatherproofed covers, material identical to cushions. Yellow. For Models: A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21966R) (19-1\2x5-1\4. (Part No: JT300Y) $29.90 [Show Picture] Pan Seat, Universal - Gold zinc plated, 3-1 2" center to center on mounting holes, 1 2" by 1 2" center square. (Part No: B1865) $36.96 [Show Picture] Seat Back - Yellow, wood, 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. For seat bottom order part 0172R. (Part No: R0173) $30.02 [Show Picture] Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R0993) $45.90 Seat Back - Black, wood, 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R0864) $32.64 [Show Picture] Seat Belt - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $35.90 [Show Picture] Seat Bottom - Durable, weatherproofed leatherette cover & solid one-piece foam filler assure complete customer satisfaction. Plated steel all-around corner brackets. Yellow. For Models: A, B, G, 50, 60, 70 series (22-1\4 x 14-3\4). (Part No: JT77Y) $38.90 [Show Picture] Seat Bottom - Black, wood, 20 inches x 15 inches. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R0863) $43.86 [Show Picture] Seat, Universal - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $139.90 [Show Picture] Tie-On Seat Cover - Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2602) $37.79 [Show Picture] Tie-On Seat Cover - Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: R1014) $37.79 [Show Picture] Tie-On Seat Cover - Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016) $37.79 [Show Picture]   Sheet Metal / Body Parts Battery Box - For 70, 720, and 730, all Gas. Battery Box. Made In USA. Also replaces AF3005R. (R0916) (Part No: AF1597R) $121.66 [Show Picture] Battery Box - With tool box door, for diesel models w Pony motor: 70, 720. (Part No: AF2077R) $147.31 Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $22.95 [Show Picture] Fender - Right hand or left hand, fits either side. Clamshell style fender does NOT come with bracket for the following models: A, B, G, 50, 520, 60, 620, 70, 720 Diesel, 630, 730 Diesel. Add $10 shipping due to weight. Fender measures 27 3 4 tall and 33 inches wide at tallest and widest dimensions. (Part No: AA4655R) $124.81 [Show Picture] Grill Rod - For 60, 620, 630, 70, 720, 730. Grill Rod. (4275R) (Part No: A4317R) $10.15 Grill Screen - For 60, 60 Standard after S N 6043000, 620, 630, 70, 720, 730. Grill Screen(R0848) (Part No: A4316R) $40.75 [Show Picture] Step w/Bracket - Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: R2098) $68.36 [Show Picture] Tool Box - Universal Tool Box 15 1 2" X 4 3 4" X 4 1 4". Painted Red. (Part No: R2685) $25.45 [Show Picture] Tool Box - Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5 8" wide and 4-1 2" deep. (Part No: TB100FM) $33.88 [Show Picture] Tool Box Cover w/ Hinge - Grated top. For Models: 60, 70, 620, 630, 720, 730. (standard models). (Part No: R4774) $43.89 [Show Picture] Tool Box Cover w/ Hinge - Smooth top. For Models: 60, 70, 620, 630, 720, 730. (standard models). (Part No: R4775) $44.62 Tool Box Side - Fender Mount For 60, 620, 630, 70, 720, 730 Standard (Part No: R4271) $38.41 [Show Picture]   Steering Center Pivot Housing with Bushing - For Models: 50, 520, 530, 60, 620, 630, 70, 720, 730 all with square tube axle only. Center Pivot Housing with Bushing. Add $15 additional shipping cost for this item due ot weight (70 lbs) (Part No: AA5765R) $342.54 [Show Picture] Drag Link End Assy - For 50, 60, 70, 520, 530, 620, 630, 720, 730. OEM# C838R, C840R (Part No: R3849) $53.04 [Show Picture] Drag Link Rod - For 60, 70, 620, 630, 720, 730 with Adjustable Round Front Axle (Part No: R3850) $36.72 [Show Picture] Front Axle Assembly, Wide, w/o hubs - Schwartz replaces original Axle For 60, 620, 630, 70, 720, 730, all with 2 piece pedestal. Complete Front Axle without Hubs contains, Standard Duty Front Axle, Steering Bracket Assembly, lock washers, cap screws, Long Saddle Assembly, Spacers, Spindles, Cotter pins, and Nuts. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 276 lbs. (Part No: 21051) $935.52 Pivot Bolster - For Models: A, B, G (48-80 Tread), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: R3060) $364.98 Power Steering Fill Hole Plug - For 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830. Power Steering Fill Hole Plug, Metal. (Part No: R2480) $16.52 [Show Picture] Retainer, Front Axle Wear Sleeve - Retainer. For model applications: A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: TP-D635R) $12.08 [Show Picture] Spindle - Spindle, LH RH, Dimension A-14.375 inch, B-1.5 inch, C-1.625 inch, D-1.312 inch. Fits A, AO, AR, B, GH, 50, 520, 530, 60, 620, 630, 70, 720 All w Factory Wide Fronts only. (Part No: AA5789R) $183.50 [Show Picture] Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, , 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5 8" Diameter, 13 16" Keyed Hub. 2447R (Part No: AA280R) $71.35 [Show Picture] Steering Wheel - For R, 70, 720, 80, 820 Without Power Steering. Steering Wheel, 20" Diameter, 4 Spokes, 11 16" Keyed Hub. (Part No: AR505R) $50.00 [Show Picture] Steering Wheel Acorn Nut - Stainless steel. For Models: 50 S N 20400 and above, 60 S N 37000 and above, 70 S N 13000, and above, 520 S N 8099 and below, 620 S N 13099 and below, 720 S N 14899 and below, 80, 820 S N 3099 and below. (Part No: F1745R) $19.00 [Show Picture] Steering Wheel Acorn Nut - STEERING WHEEL ACORN NUT (Stainless Steel) FOR 50 (From S# 20400), 60 (From S# 37000), 70 (From S# 13000), 520 (To S# 8099), 620 (To S# 13099), 720 (To S# 14899), 80, 820 (To S# 3099) - Replaces #F1745R (Part No: R4506) $18.90 [Show Picture] Steering Wheel Cap - For Use with R3555, R3858 & R3895For Models with Power Steering\ (Part No: R3859) $47.84 [Show Picture] Steering Wheel Plate - Fits John Deere 50 SN #5020400 & up, 60 SN #6037000 & up, 70 SN #7013000 & up, 520 up to SN #5208099, 620 up to SN #6213099, 720 up to SN #7214899, 80 & 820 up to SN #8203099 (All w Power Steering), Replaces #F1744R (Part No: F1744R) $17.90 [Show Picture]   Wheels Bearing Cone - BEARING CONE For 50, 60, 70, A, BW, D, G (Part No: 2785-TIM) $18.92 Bearing Cone - Outer bearing cone. For models: 50, 60, 70, 520 with 48-80 adjustable or 38 fixed thread~ 620, 630, 720 and 730 excluding roll-o-matic, 3010 and 3020 with 38 fixed thread, 4010 with 38 fixed thread. For 620, 630, 70, 720, 730 (Part No: 2790) $17.68 Bearing Cone - BEARING CONE For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: 3383) $22.30 Bearing Cone - Outer bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 50, 60, 70, A, BW, D, G (Part No: TP-JD7216) $18.92 Bearing Cone - Inner bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: TP-JD7224) $22.30 Bearing Cup - BEARING CUP For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: 3320-TIM) $15.54 Bearing Cup - Inner bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: TP-JD7270) $15.54 Bearing Cup - Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Part No: TP-JD7266) $7.88 Clamp Lock Nut - 1-14 thread, fits front wheel on A, D, G, R, 50, 60, 70, 3010 & 4010. For 3010, 4010, 50, 60, 70, A, D, G, R (Part No: LN10-6) $15.04 Front Wheel Bearing Kit - Front Wheel Bearing Kit- Wheel bearing kit FOR 1 WHEEL. Contains: bearings, inner and outer cups & cones. for A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 50, 60, 70, A, BW, D, G (Part No: FW109S) $60.24 [Show Picture] Front Wheel Bearing Kit - Front Wheel Bearing Kit- Wheel bearing kit FOR 1 WHEEL. Contains: bearings, inner and outer cups & cones.. For models: 50 adjustable serial number 5019165 and up~ 60 serial number 6034694 and up~ 70 excluding standard serial number 7011653 and up~ 520 with 48-80 adjustable or 38 fixed thread~ 620, 630, 720 and 730 excluding roll-o-mat For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730 (Part No: FW151S) $55.44 [Show Picture]

Shopping Cart View Cart Checkout Phone Orders (800) 853-2651 Customer Service (360) 379-4808 Monday - Friday: 10:00 AM-6:30 PM EST Order online anytime! Your Shopping is Secure! Member of the Better Business Bureau

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us! We carry tractor parts and manuals for: Allis Chalmers, Case, Farmall, Ferguson, Ford, Fordson, International, International Harvester, John Deere, Massey Ferguson, Massey Harris, Oliver, and more. Products include: 3 Point Hitch parts, Alternators, Battery Accessories, Bearings, Belt-fan, Generator & Alternator, Brake Parts, Carburetor Repair Kits, Coils, Decals, Fenders, Generators, Hydraulic Cylinders, Ignition Kits, Manifolds, Mufflers, Paint, PTO Clutches, Radiators, Seals & Gaskets, Starter Drives, Starters, Tie Rod Ends, Tractor Gas Tanks, Tractor Seats, Water Pump Repair Kits, Water Pumps, Wheel Bearing Kits [Product Files] Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation Antique Tractor Headquarters All Rights Reserved TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.