Low Prices - Fast Shipping - Thousands of Items in Stock!

Secured by SSL	Order online or call (800) 853-2651

• Tractor Parts • Manuals • Videos & DVDs • Hats • Books Featured Item    I&T Shop Manuals • Contact Us • Shipping Rates • Return Policy • Ordering Help • Company Info • Parts Warranty • Tractor Info    (YT Home)

Ford NAA (Golden Jubilee) Parts [ Turn Off Pictures ]   Brakes Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255) $69.90 [Enlarge Picture] Brake Backing Plate Felt Seal - For Models: 8N, NAA, Jubilee. (Part No: 8N2217) $2.59 [Enlarge Picture] Brake Drum - For 8N, NAA, Jubilee. An additional $7.00 will be added to shipping per drum (heavy item).(22#) (Part No: 8n1126) $103.46 [Enlarge Picture] Brake Drum Repair Kit - For Models: 8N, NAA Jubilee. Replaces: 8N2027B Contains: Anchor (2), H2041 Adjuster Screw, 8N2217 Felt Backing Plate Seal, 8N2048 Adjuster Socket, 8N2223 Adjuster Nut, 8N2049 Adjuster Spring, 8N2297B Return Spring, 8N2299 Secondary Spring LH only. Brake Hardware Kit for 1 wheel. (Part No: 8NAA2250) $29.23 [Enlarge Picture] Brake Shoes - Brake Shoes For 8N, NAA, Jubilee - Set of 4. (Part No: 8N2200B) $47.41 [Enlarge Picture] Bushing - Brake cross shaft bushing. Press into transmission housing. For tractors: Late 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477) $5.59 [Enlarge Picture]   Clutch Clutch Alignment Tool - 1-3 8 inch, 10 spline, .670 inch pilot. For Models with single clutch: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: S.70930) $8.49 [Enlarge Picture] Clutch Disc - 10" Clutch Disc NAA, Jubilee, 600, 700, 800, 900 (4 speed to serial # 14257) - 10 Spline x 1 3 8" Hub - This Is A Retrofit For 9" Clutch, Must Use 10" Pressure Plate. (Part No: NCA7550A) $70.35 [Enlarge Picture] Clutch Disc, New - 9" Clutch Disc, Hub-1 3 8 inch, Splines-10, 6 springs. Fits: 9N, 2N, 8N, NAA (4 speed), NAB, Jubilee, 600, 700, 800, 900 (to serial # 14257), 1800, 2130. Improved from original by added springs. (Part No: 91A7550WHD) $37.93 [Enlarge Picture] Clutch Kit, 9 Inch, Single Clutch - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. 9" Clutch & Pressure Plate Kit For single clutch models, 3 & 4 speed transmission. Contains NEW: clutch pressure plate, disc, release bearing, pilot bearing and alignment tool. (Part No: 8N7563K) $125.95 [Enlarge Picture] Clutch Pedal Arm Bushing - For models 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002" I.D. x 1-1 2" long. Minimum Order Qty is 2. (Part No: 8N7508B) $5.43 [Enlarge Picture] Clutch Pedal Shaft Bushing - 7 8 Inch inside diameter. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A) $5.21 [Enlarge Picture] Clutch Release Arm Kit - For 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm Kit contains: eyebolt #355584S8, pin #8N7533, and clutch release arm #8N7511B. (Part No: S.66657) $48.60 [Enlarge Picture] Pilot Bearing - For Models: 9N, 2N, 8N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A) $5.49 [Enlarge Picture] Pressure Plate - 9in. single, flat flywheel. For Models: 1800, 2130, 2N, 8N, 9N, NAA, NAB, Jubilee, 600, 700, 800, 900 w single clutch. (Part No: 8N7563) $69.90 [Enlarge Picture] Release Bearing - For Ford Tractors with 9" and 10" Single Clutch 1939-1964. (Part No: 78-7580A) $20.50 [Enlarge Picture] Release Bearing Hub - For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 8N, 900, 901, 950, 951, 9N, NAA, Jubilee, NAB. (Part No: 9N7561) $20.42 [Enlarge Picture]   Cooling System Fan Belt - Notched belt is 41 3 8 inches long. For models 8N late (with side mount distributor), NAA (1952-1954, Jubilee. This belt also works with # 8NL10300ALT Alternator conversion kit. (Part No: 8N8620) $5.26 [Enlarge Picture] Fan Blade - 4 Blade - For Models: 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125" Centers. Diameter is 15.75". (Part No: 8N8600A) $43.27 [Enlarge Picture] Fan Blade - 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D) $74.23 [Enlarge Picture] Fan Shroud - For Models: NAA, Jubilee, 501, 541, 600, 700, 800, 900, 601, 611, 621, 701, 801, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. Fan Shroud, Metal. (Part No: NCA8146A) $62.50 [Enlarge Picture] Radiator - For 4-cylinder GAS and Diesel engines (before 1965) on: NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Not for HD Industrial & Forklifts (Part No: C5NN8005AB) $235.64 [Enlarge Picture] Radiator Cap - Cap, radiator, 4 psi. For tractors NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4cyl gas & diesel (1953 to 1964 except Majors. (Part No: 1T8100A2) $8.06 [Enlarge Picture] Radiator Drain Tap - Drain Tap-For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. This is also the same tap for the engine block in the 9N, 2N, 8N, NAA engines. (Part No: C9NN8115A) $3.56 [Enlarge Picture] Radiator Hose Set - Used with 4 cylinder 134-172 GAS engine. Includes Upper and Lower hose. 312588 Lower & NAA8260B Upper for: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, ``(2000, 4000 MANUAL steering only). (Part No: 134-172HOSESET) $10.20 [Enlarge Picture] Radiator Hose, Upper - Hose for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, Series. Can replace 310048. (Part No: NAA8260B) $4.63 [Enlarge Picture] Radiator Mounting Pads - Package of 2. For models NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Replaces B9NN8125A. (Part No: 180705M1) $5.90 [Enlarge Picture] Thermostat - 160 degree lo-temp, with gasket. For gas engines 1953 to 1964. (Part No: EAF8575BWG) $10.54 [Enlarge Picture] Thermostat Housing - For Models: NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Gasket available as part #EAF18255A, request in comments section of order form. (Part No: 310031) $41.81 [Enlarge Picture] Water Pump - For NAA, Jubilee (Part No: CDPN8501B) $46.13 [Enlarge Picture] Water Pump Kit - Repair kit. For 2N, 8N, 9N, NAA, Jubilee (Part No: CPN8591B) $30.51 [Enlarge Picture] Water Pump Pulley, Single Groove - For Models: NAA, Jubilee. Single Groove Water Pump Pulley. (Part No: EAF8509A) $25.90 [Enlarge Picture]   Decals and Emblems Decal Set, Complete - For Models: NAA, Jubilee. (Part No: R4665) $30.00 [Enlarge Picture] Decal, Fear This Ford - 12-1 2 x 3. For all Ford tractors. (Part No: S.67825) $18.08 [Enlarge Picture] Ford Script Painting Mask - Includes 1 smaller 7-1 4" x 1-3 4" and 1 large 9" x 3" painting masks. For Models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.67163) $18.86 [Enlarge Picture] Hood Emblem - Restoration quality w studs and retaining clips. For Models: NAA (not Jubilee), 501, 601, 701, 801, 861, 901, 1801, 2031, 4030, 4031, 4040, 4140. Chrome, Gold and red. (Part No: 311231) $66.99 [Enlarge Picture]   Drive Train Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. **$15 ADDED TO SHIPPING DUE TO WEIGHT** (Part No: 8N4235C) $139.90 [Enlarge Picture] Axle Bearing Assembly - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. This includes rear axle bearing and cup. Replaces 9N4222, 2N4221. (Part No: S.18516) $42.95 [Enlarge Picture] Axle Clamp Lock Nut - Clamp lock nut, rear axle, 1-1 4". For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21) $24.24 [Enlarge Picture] Axle Kit, Rear - Kit contains 2 rear axle shaft bearings, 2 Rear axle washers, 2 rear axle housing gaskets, 2 rear axle shaft bearing cup, 2 rear axle nut and lock rings, 2 rear axle shaft gaskets, 2 rear axle seals, 2 rear axle outer oil seals, 2 axle housing to center housing gaskets. For Models: NAA, Jubilee. (Part No: AXLEKIT-NAA) $155.06 [Enlarge Picture] Axle Ring - For 8N 1948-1953, Jubilee & NAA. (Part No: 8N4187) $1.36 [Enlarge Picture] Axle Seal, Outer Pair - For Models: 8N S N 486753 UP, NAA, Jubilee. Comes in pairs. (Part No: D5NN4115A) $9.78 [Enlarge Picture] Axle Shaft Gasket - For Models: 600, 700, 800, 900, 8N, NAA, Jubilee. ID = 2 inch, OD = 2 1 4 inch. (Part No: 8N4284) $2.98 [Enlarge Picture] Axle Shaft Nut - 1.25", 18 hex. For Models: (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179) $4.86 [Enlarge Picture] Countershaft - For NAA, Jubilee. Countershaft. (Part No: NAA7111C) $166.29 [Enlarge Picture] Differential Pinion Cone, Front - Bearing, Tapered Cone. For Models: 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, DEXTA 1957-4 1962, NAA, Jubilee 1953-1954. (Part No: BB4621B) $30.95 [Enlarge Picture] Differential Pinion Pilot Bearing - For Models: 2120 W 4 SP.TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 600 W 4 SP.TRANS. SN<54165 - 1958, W 5 SP. S N <196155 -1959, 601 W 4 SP.TRANS. S N 54166> -1958-62, 5 SP. S N 106116> - 1960-64, NAA, Jubilee 1953-1954. (Part No: 81T4625MA2) $36.00 [Enlarge Picture] Gasket, Axle housing to center - Gasket center housing to rear axle hsg. Tractors: NAA, 600, 2120, LCG (1953 & up). (Part No: NAA4036A) $1.95 Gasket, Gear Shift Cover Plate - For 4 speed transmissions. For Models: 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Price is for each. (Part No: 8N7223) $2.50 [Enlarge Picture] Gasket, Main Drive Gear Bearing Retainer - For Models: 9N, 2N, 8N, NAA, Jubilee, NAB. Sold in quantities of 2. Price is for 1. (Part No: 9N7086) $0.52 [Enlarge Picture] Gear Shift Lever, w/ Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 3 8in. UNF thread for the shift knob (knob included) (the older shift levers had 5 16in. UNF thread). Note: uses gear shift knob p n BB7213A. Fits: 8N, NAA, Jubilee, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B) $67.90 [Enlarge Picture] Gear Shift Pin - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000(>1965 (w 3 & 4 Speed transmission). (Part No: 9N7221B) $3.25 [Enlarge Picture] Gear, 1st, 4 Speed Transmission - 60 28 tooth. For Models: 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100) $200.14 [Enlarge Picture] Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-64), 8N (1948-52). 17 teeth. (Part No: B9NN7114A) $106.40 [Enlarge Picture] Gear, 3rd, 4 Speed Transmission - 52 tooth. For Models: 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All w 4 speed transmissions. (Part No: 8N7102) $182.70 [Enlarge Picture] Gear, 4th, 4 Speed Transmission - Has 28 & 36 teeth. For Models: 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112) $227.75 [Enlarge Picture] Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B) $91.52 [Enlarge Picture] Gears, 2nd Mainshaft & Countershaft, 4 Speed Transmission - For 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 cyl engines & 4 speed transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set) $154.54 [Enlarge Picture] Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171) $59.90 [Enlarge Picture] Input Shaft - 4 Speed, 15 Spline. For Models: 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 841, NAA, NAB, Jubilee. (Part No: 311203) $260.62 [Enlarge Picture] Main Shaft Connecting Coupling - For Models: 2000, 3000, 8N, NAA, Jubilee all with 4 Speed Transmission. Main Shaft Connecting Coupling has 21 teeth, 16 spline. (Part No: E6NN7106AA) $50.65 [Enlarge Picture] Oil Seal, Main Drive Gear - Oil Seal For 3 & 4 Speed transmission Main Drive Gear on: 9N, 2N, 8N, 600, 700, 800, 900, NAA, NAB, Jubilee. **Minimum order qty is 2** (Part No: 8N7052A) $3.06 [Enlarge Picture] Reverse Idler Assembly - Fits 5 Speed Transmissions '55 - '64. Replaces NDA7723C, NDA7141A, NDA7140A. (Part No: NDA7723C) $248.16 [Enlarge Picture] Shift Knob - Knob, transmission gear-shift lever. For all 4- & 5- speed transmission models (1950-1964 s n 252844 & up). (Part No: BB7213A) $2.99 [Enlarge Picture] Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066) $6.30 [Enlarge Picture] Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067) $6.88 [Enlarge Picture] Transmission Rebuild Kit - For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, Timken bearings and gaskets required for transmission rebuild. (Part No: TSBK5354) $84.14 [Enlarge Picture]   Electrical System (Starters, Generators, Coils, Wiring, etc.) 12 Volt Conversion Kit - 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil. (Part No: NAA10300ALT) $143.22 [Enlarge Picture] Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR) $0.00 Alternator Adjustable Arm - Alternator adjusting arm. For alternator conversion on the following tractors (1953-1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: NAA10303) $23.54 [Enlarge Picture] Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Part No: NAA10302) $31.04 [Enlarge Picture] Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire 'self exciting' alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 8NE10305SE) $87.73 [Enlarge Picture] Battery Cable - For Models: NAA, Jubilee, 600, 700, 800, 900, all 1953 and later. Starter to Switch Cable. 14.5 inches long. Replaces FAA14431B. (Part No: 9N14431B) $10.59 [Enlarge Picture] Battery Cable - For NAA, Jubilee, 600, 700, 800, 900, all 1953 and up. Cable. 10" long. (Part No: D1NN14300G) $8.30 [Enlarge Picture] Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. (Part No: 86H14321A) $13.43 [Enlarge Picture] Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A) $47.62 [Enlarge Picture] Coil Bracket - Universal Coil Bracket (Part No: R1940) $6.61 [Enlarge Picture] Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611) $33.20 [Enlarge Picture] Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $25.51 [Enlarge Picture] Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $25.51 [Enlarge Picture] Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111) $33.20 [Enlarge Picture] Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 2N, 9N early 8N using front mount distributors) (Part No: 40011) $25.51 [Enlarge Picture] Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 2N, 9N early 8N using front mount distributors) (Part No: 40011) $25.51 [Enlarge Picture] Coil, High Performance (Chrome), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40601) $35.20 [Enlarge Picture] Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Chrome 'Flame Thrower' high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $28.67 [Enlarge Picture] Coil, High Performance (Chrome), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40101) $35.20 [Enlarge Picture] Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $28.67 [Enlarge Picture] Coil, Ignition 12V - 12 volt, Fits many models. (Part No: D5TE12029AB) $15.36 [Enlarge Picture] Coil, Ignition 6V - Standard 6 volt coil. Fits many models. (Part No: D4PE12029AA) $20.08 [Enlarge Picture] Coil, Ultra High Performance (Black), Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts, enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45111) $36.92 [Enlarge Picture] Coil, Ultra High Performance (Black), Oil Filled - Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011) $30.34 [Enlarge Picture] Coil, Ultra High Performance (Chrome), Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts, enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45101) $38.92 [Enlarge Picture] Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $32.34 [Enlarge Picture] Condenser - For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FET12300A) $3.62 [Enlarge Picture] Distributor - With Slotted Drive Shaft For NAA, Jubilee (Part No: R2892) $339.90 [Enlarge Picture] Distributor Cap - Fits Tractors: 8N S N 263844(Side mount), 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 Series (4 Cylinder) (Part No: NCA12106A) $6.90 [Enlarge Picture] Distributor Driven Gear - For Model: NAA, Jubilee. (Part No: FAD12390A) $42.75 Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 (Part No: FAA12239A) $9.14 [Enlarge Picture] Distributor Point Set - For FDN12127A & 311185 distributor used on NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: D8NN12171AA) $5.37 [Enlarge Picture] Distributor Rotor, Side Mount Distributor - Fits the following gas tractors up to 1964: 8N w side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: C0NN12200A) $3.20 [Enlarge Picture] Distributor, Breaker Plate - Deck plate with points & condensor. For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FAD12152A) $23.08 [Enlarge Picture] Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor) , NAA, Jubilee, 600, 700, 501, 601, 701, 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A) $70.06 [Enlarge Picture] Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, 600, 700, 501, 601, 701, 800, 900, 801, 901, 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 1244AN6) $77.30 [Enlarge Picture] Electronic Ignition Conversion Kit - 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, 600, 700, 501, 601, 701, 800, 900, 801, 901, 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6) $77.30 [Enlarge Picture] Ignition Kit With Rotor - Ignition kit contains: points, rotor, condensor. For 8N (side mount distributor), NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: ATK7FAR) $6.30 Ignition Switch, Keyed - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3 4 inch hole. Keyed Ignition Switch comes with 2 keys (Part No: 8N3679C) $12.20 [Enlarge Picture] Ignition Tune Up Kit, Basic, 4-Cylinder Gas - For Models: NAA, NAB, Jubilee, 8N w side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). Tune Up Kit, Autolite. Kit contains: D8NN12171AA Point Set, FET12300A Condenser, CONN12200A Rotor & Spark Plugs. (Part No: 309787) $14.00 [Enlarge Picture] Ignition Tune Up Kit, Comprehensive, 4-Cylinder Gas - For 8N (S N 263844 & up), NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 , 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and spark plugs. (For use with original equipment distributors). (Part No: TUNEKIT) $29.99 [Enlarge Picture] Spark Plug - For 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). SPARK PLUG. Price is for EACH. Minimum Order is 4. (Part No: AL437) $2.06 [Enlarge Picture] Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442) $12.68 [Enlarge Picture] Spark Plug Wire Set, Custom, 4 Cyl. - Custom premium quality set fits 4-cylinder gas engines in : NAA, Jubilee, NAB, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). (Part No: CPN12259CUSTOM) $19.40 Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $19.28 [Enlarge Picture] Spark Plug Wire Set, Universal, 4 Cyl. - For Models: NAA, Jubilee, NAB, 9N, 2N, 8N, 2030, 2120, 2130, 2131, 4030, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: CPN12259) $9.78 [Enlarge Picture] Starter - Starter, less drive, special Delco option- DOES NOT LOOK LIKE ORIGINAL. For Jubilee, 2000, 4000, 501, 600, 700, 800, 900, NAA, (Part No: C3NF11002RXLD) $132.90 [Enlarge Picture] Starter - Starter, less drive. For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C3NF11002RXL) $136.95 [Enlarge Picture] Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER) $0.00 Starter - 6 volt, clockwise rotation. For models: (NAA 1952-54 w 134 4 cyl. gas), (501, 601 series 1957-62 w 134 4 cyl. gas), (640, 660, 740 1954-57 w 134 4 cyl. gas), (641, 651, 681 1957-62 w 134 4 cyl. gas), (701 series 1962-68 w 134 4 cyl. gas), (801, 901 series 1962-68 172 4 cyl. gas), (841, 851, 881 1957-62 w 172 4 cyl. gas), (850, 860, 960 1954-57 w 172 4 cyl. gas), (4000LCG, 4030, 4040 1961-64 w 3-201 diesel). Replaces FAC11002, C3NF1100D. (Part No: SFD0047) $96.49 [Enlarge Picture] Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115) $8.39 [Enlarge Picture] Starter Drive - Drive assembly. For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C1AF11350A) $43.73 [Enlarge Picture] Starter Relay Assembly 6-Volt - For NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Relay Assembly, 6 Volt, 3 Terminal. (Part No: NCA11450A) $8.85 [Enlarge Picture] Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Part No: SRK403) $15.34 [Enlarge Picture] Starter Solenoid, 12-Volt - Relay Assembly, 12 Volt, 4 Terminal. For most 12 Volt GAS Models 1958-1964 including: Jubilee, 501, 541, 600, 601, 611, 620, 621, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB, 2000, 2030, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140.Replaces 311007FR. (Part No: 311006) $12.72 [Enlarge Picture] Starter Switch - with mounting gasket. Fits: 8N (1948-1952);all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. (Part No: 8N11500WG) $27.92 [Enlarge Picture] Starter w/Drive - 12 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter w Drive replaces D8NN11350CA. (Part No: S.66630) $159.00 [Enlarge Picture] Starter w/Drive - 6 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter w Drive replaces D8NN11350CA. (Part No: S.66619) $159.00 [Enlarge Picture] Terminal Block - For Models: 8N 1950-52, Jubilee, NAA, (2000, 4000 up to 1964), 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 8NNN14448A) $5.25 [Enlarge Picture] Voltage Regulator - Voltage regulator, 12-volt. For Models: NAA, Jubilee. (Part No: 8NE10307) $24.75 [Enlarge Picture] Voltage Regulator, 12 Volt - For Models: (NAA, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee all 1958-1964 with Diesel Engine. (Part No: C0NF10505A) $39.16 [Enlarge Picture] Voltage Regulator, 6 Volt - 6 volt positive ground for 1953-1964 GAS engine tractors: NAA, Jubilee, 1800, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (Part No: FAG10505A) $26.71 [Enlarge Picture] Wiring Harness - Fits NAA & Jubilee (1953 to 1954). Ignition harness only. (Part No: FAF14401B) $23.66 [Enlarge Picture] Wiring Harness, 12 Volt Conversion - For Models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 1953-64. (Part No: NAA10301) $42.20 [Enlarge Picture]   Engine Bearings Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-STD) $34.81 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 & 172 4-cylinder GAS or Diesel engines.(.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-010) $34.81 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 & 172 4-cylinder GAS or Diesel engines(.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-020) $34.81 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 & 172 4-cylinder GAS or Diesel engines.(.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-030) $34.81 [Enlarge Picture] Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-040) $40.55 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010 - For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (.010 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312103-010) $27.10 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.020 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312104-020) $25.93 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-030) $29.70 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-040) $26.80 [Enlarge Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD - For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-STD) $33.84 [Enlarge Picture]   Engine Gaskets Crankshaft Seal, Rear - Fits 134 CID, 172 CID gas & 175 CID diesel engines. For Models: 2000 up to 1964, 4000 1962 - 1964, 500, 600 Series, 700 Series, 800 Series 1955 - 1957, 801 Series 1958 - 1962, 900 Series 1955 - 1957, 901 Series 1958 - 1962, NAA, Jubilee. Min order qty is 2. (Part No: C0NN6701A_) $5.64 [Enlarge Picture] Head Gasket 134/172 Gas - Head gasket, non-metallic with 1 2" head bolt holes. For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: E9JL6051AA) $26.92 [Enlarge Picture] Head Gasket, 134 or 172 CID Gas Engines - Head gasket, metal clad with 7\16 head bolt holes. For 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 2000, 4000 with 134 172 gas engines. (Part No: EAE6051DM) $15.82 [Enlarge Picture] Lower Gasket Set - Used on 134 CID & 172 CID gas or diesel engines. For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: CS3477) $44.95 Main Bearing Cap Packing Material, V-Style - For 134 CID Gas in NAA, Jubilee. Price is for each.``**MINIMUM ORDER QTY IS 2. Must be ordered in quantities of 2. (Part No: B3NN6336A) $3.18 [Enlarge Picture] Oil Pan Gasket - Fits 134 gas and 172 gas diesel engines in : NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6710B) $6.38 [Enlarge Picture] Overhaul Gasket Set - Full Overhaul Gasket Set For NAA, Jubilee, 600, 700 - 134" Gas Engine (Head gasket for 7 16 head bolts)(1953-1957) (Part No: CPN6008HM) $43.07 [Enlarge Picture] Overhaul Gasket Set Less Head Gasket 134/172 Gas - For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Part No: CPN-FPN) $31.71 [Enlarge Picture] Timing Gear Front Cover Gasket - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All gas or diesel 1953 to 1964. (Part No: EAF6020B) $1.95 [Enlarge Picture] Upper Engine Gasket Set - Metal head gasket w 7 16" bolt holes. For tractors: NAA, Jubilee, 600, 700; 134 CID engine (1953-1957). (Part No: VGCPNM) $25.26 [Enlarge Picture]   Engine Overhaul Kits Basic Engine Overhaul Kit, 134 CID Gas, Overbore - Made by TISCO. Super power 3.5” overbore Kit, Kit includes sleeve & piston set, rings, retainers, head gasket. Bearings must be ordered separately. For the following tractors using 134 CID 4 cylinder gas engine (1953-1957): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 2000. (Part No: BEKF110M-LCB) $389.08 [Enlarge Picture] Basic Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3 7 16 kit w metal head gasket. Contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For Models: NAA, Jubilee, 600, 700. (Part No: BEKF114AM-LCB) $283.02 [Enlarge Picture] Engine Overhaul Kit, 134 Gas - Made by TISCO. Overhaul Kit less bearings for 134 gas engine in NAA, Jubilee, 501, 600, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7 16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set) , Gasket Set, Connecting Rod Bushings. Intake & Exhaust Valves (plus guides, locks and springs). Order bearings separately. (Part No: EOK114-LCB) $366.25 [Enlarge Picture] Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3-7 16" standard bore w slotted drive. Complete Overhaul Kit For NAA, Jubilee, Contains complete gasket set, standard camshaft timing gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve & piston kit, oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings are available, must be ordered separately. (Part No: NAAK-LCB) $479.49 In Frame Overhaul Kit, 134 GAS - Made by TISCO. For NAA, Jublee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57. Includes: Super power set 3 1 2" overbore PK110 sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF110M) $333.84 In-Frame Engine Kit, 134 Gas - Made by TISCO. For NAA, Jubilee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57, 3-7 16" standard bore. Includes: CPN6055A sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set w head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF114AM) $254.75 [Enlarge Picture] Lucas Assembly Lube - Lucas Assembly Lube (8 oz). Designed to used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing Perfect for engine lding, ``Super slick and tacky, Easy to use, Excellent rust inhibitor, Excellent for long term storage, Contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $6.49 [Enlarge Picture] Overhaul Kit, 134 Gas - Made by TISCO. Complete Overhaul Kit for 134 gas engine in NAA, Jubilee, 501, 600, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7 16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set) , Gasket Set, Connecting Rod Bushings & Bearings. Center, Front & Rear Main Bearings. Intake & Exhaust Valves (plus guides, locks and springs). Available with Std., .001, .002..010, .020 or.030 bearings. (Part No: EOK114) $468.47 [Enlarge Picture] Valve Service Kit - Made by TISCO. For Servicing one engine with valve related parts when only valve refacing is required. Kit contains: Springs, Key and Guides. (Gasket set VGCPNM must be ordered separately) For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964) (Part No: VSKF134G) $42.54 [Enlarge Picture] Valve Train Kit, 134 CID Gas - Made by TISCO. For Servicing one engine when valve replacement is necessary. Kit contains: Valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964) (Part No: VOKF134G) $111.25 [Enlarge Picture]   Engine Parts CAMSHAFT TIMING GEAR, PRESS ON - Press on Cam Gear. For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000. 134 & 172 CID Gas Engines. (Part No: S.61044) $36.79 [Enlarge Picture] Camshaft Hydraulic Pump Drive Gear - For Models: 2000, 4000, 600, 700, 800, 900, NAA, Jubilee, all with 134 gas or 172 diesel engines. Camshaft Hydraulic Pump Drive Gear. 5 16 inch tapped hole. Also replaces 500010. (Part No: EAF907B) $46.24 [Enlarge Picture] Camshaft Kit, Refaced Camshaft and Lifters - Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that Use a pressed on cam gear.: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000. Order S.61044 press on cam gear if needed. (Part No: 734145) $208.26 [Enlarge Picture] Camshaft, New - New Camshaft. This is the Lock Ring Type and will work for both types of Cam Gears. Bolt on cam gear type is only available in a Reground Camshaft - Call for availability and price. For NAA, Jubilee, 500 thru 900, 2000, & 4000. 134 & 172 CID Gas Engines (1953-1964). (Part No: C0NN6251A) $133.21 [Enlarge Picture] Camshaft, Reground - Bolt on gear type. For Models: NAA, 600, 700, 800, 900, 2000, 4000 all w 4 cyl. gas engines and casting # C0NN6251. (Part No: R1188903) $133.59 Connecting Rod, Reconditioned, w/ Bushing - Must match casting number EAA6205. Fits all gas Tractors with GASOLINE 134 or 172CID Engines. NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 all. Reconditioned Piston Rod with Bushing. (Part No: 1201599) $99.33 [Enlarge Picture] Crankshaft Gear - For Models: NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Part No: EAF6306B) $43.80 [Enlarge Picture] Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID & 172 CID engines on: NAA, Jubilee, 600, 620, 630, 640, 641, 650, 660, 601, 611, 621, 631, 641, 651, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: D1NL6303D) $488.38 [Enlarge Picture] Starter Flywheel Ring Gear - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. (Part No: 9N6384) $28.82 [Enlarge Picture] Tappet - For Models: 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Part No: EAA6500D) $17.78 Timing Gear Set - Standard Press on Cam timing gear set also includes (EAF6306B) crankshaft gear fits, 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-64, 4000 <1964, 500, 600, 700, 800, 800 1955-57, 801 DIESEL 1964, 801 GAS 1958-62, 900, 900 1955-57, 901 DIESEL 1964, 901 GAS 1958-62, NAA, 500, Jubilee. (Part No: EAF6256MSTD) $80.17 [Enlarge Picture] Timing Gear, STD - Standard steel camshaft gear. For Models: 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-64, 4000 <1964, 500, 600, 700, 800, 800 1955-57, 801 DIESEL 1964, 801 GAS 1958-62, 900, 900 1955-57, 901 DIESEL 1964, 901 GAS 1958-62, NAA, 500, Jubilee. (Part No: EAF6256M) $54.76 [Enlarge Picture] Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve Kit) $0.00 Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Sold in quantities of 4, price is for 1. (Part No: EAF6505D) $9.95 [Enlarge Picture] Valve, Intake, 172 CID Gas - Intake valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Must order in quantities of 4, price is for 1. (Part No: EBU6507A) $6.86 [Enlarge Picture]   Engine Pistons and Sleeves Piston, Standard, 134 CID Gas Engine - Standard 3-ring piston (Rings NOT included) with pin & locks. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108F) $32.92 [Enlarge Picture] Piston,.020 Overbore, 134 CID Gas Engine - Overbore.020 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108H) $44.94 [Enlarge Picture] Piston,.030 Overbore, 134 CID Gas Engine - Overbore.030 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108J) $42.38 [Enlarge Picture] Piston,.040 Overbore, 134 CID Gas Engine - Overbore.040 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108K) $44.94 [Enlarge Picture] Sleeve - Standard sleeve for 134 CID gas engine. For Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 2000. (Part No: EAE6055E) $27.76 [Enlarge Picture] Sleeve - Prefinished standard sleeve, hand pressure installed. Used in sleeve & piston kit CPN6055B. For 2000 SERIES, 501, 600, 700, NAA, Jubilee. (Part No: B3NN6055A) $27.72 [Enlarge Picture] Sleeve & Piston Kit - 134 Gas - Super Power Set - For 134 CID Gas engine. 3-1 2" overbore for increased power, authothermic pistons, chrome top rings, chrome steel segment oil rings. For 2000, 501, 600, 601, 700, 701, NAA, Jubilee. (Part No: PK110) $306.24 [Enlarge Picture] Sleeve & Piston Kit, 172 Gas, STD - For (800, 801, 900, 901, 4000, Jubilee, all with 172CID Gas, 4 Cylinder (1955-1964), Standard bore. And for 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains pistons, sleeves, piston pins, retainers & chrome top and chrome steel rail oil control rings. (Part No: PK15G1) $218.06 [Enlarge Picture] Sleeve and Piston Kit - 134 Gas - STD - For NAA, Jubilee, 501, 600, 601, 700, 701, 2000 all with 134 CID Gas, 4 Cylinder 1953-1964, Standard bore. Also for 2000 using 134 CID Gas, 4 Cylinder 1962-1964, that were sleeveless (provided block is bored). Sleeve and Piston Kit contains pistons, sleeves, piston rings, piston pins & retainers. (Part No: PK14G1) $221.55 [Enlarge Picture]   Engine Rings Piston Ring Set - 3-7 16" bore, 8 compression rings 3 32", 4 oil rings 3 16". Complete set for 1 engine. For Models: NAA, 501, 541, 600, 601, 700, 701, 2000, NAB. All with 134 CID engine. (Part No: 2C7501) $79.21 Piston Ring Set, 134 Gas, .020 - Overbore 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. .020 oversize set has 2 compression rings at 3 32in. and oil ring at 3 16in. (Part No: CPN6149H) $25.53 Piston Ring Set, 134 Gas, .030 - Complete Overbore 3-ring set cast iron. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. .030 oversize set has 2 compression rings at 3 32in. and oil ring at 3 16in. (Part No: EAE6149B) $25.53 Piston Ring Set, 134 Gas, STD - Standard 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. 2 compression rings at 3 32 and oil ring at 3 16. (Part No: CPN6149B) $29.68 Piston Ring Set, 134 Gas, STD, Chrome Top Ring - Standard 3-ring set with Chrome Top Ring. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. 2 compression rings at 3 32 and oil ring at 3 16. (Part No: EAE6149A) $39.72 [Enlarge Picture] Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32in.), 4. Number and size of oil rings for each piston (Ex: (1) 5 32in.). (Part No: RING SETS) $0.00   Exhaust System Elbow to Exhaust Manifold Gasket - Fits 134 CID gas engines 1953-1964 on Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771 and 172 CID gas engines 1955-57 on Models: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Use with elbow NAA55250B & muffler NAA5230E. **Price per each. (Part No: NAA55232A) $1.25 [Enlarge Picture] Exhaust Elbow - Outlet is 1 5 8" O.D. For 2000, 501, 600, 700, 800, 900, NAA, Jubilee, all with 134 or 172 CID engine. (Part No: NAA55250BWG) $27.48 [Enlarge Picture] Exhaust Pipe, Horizontal - Outlet pipe extension, rear straight section. For: NAA, Jubilee, 2000 (1963-1964), 501, 600, 601 (1958-1962 w 134 gas engine), 700, 701 (1958-1962 w 134 gas engine), 800 (1955-1957 w 172 gas engine). Dimensions: Inlet ID = 1-1 2in., Length = 54in., Outlet OD = 1-1 2in. (Part No: NCA5263B*) $25.12 [Enlarge Picture] Exhaust Pipe, Horizontal, 2 Piece - Fits NAA, Jubilee, 1953-1954 with 4 speed trans. Used from muffler to tailpipe, Contains NCA5255B and NCA5263B. (Part No: NAA5255D) $35.15 [Enlarge Picture] Extension Pipe - Vertical two-piece exhaust pipe with clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5 8" I.D., outlet 1-3 4" O.D. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: M105) $29.94 Intake & Exhaust Manifold Gasket - For gas engine Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All from 1953-1964. Price is for each-2 needed per tractor (Part No: C0NN9448C) $2.82 [Enlarge Picture] Manifold, Gas - Intake - Exhaust Manifold For 4 cylinder gas engines in NAA, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accomodate different carburetors. Comes with mounting gasket and 2 elbow gaskets. (Part No: TFM9425WG) $148.65 [Enlarge Picture] Muffler & Pipe Assembly, Vertical - For the following 134ci gas tractors: (NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-64). For the following 172ci gas tractors: (800, 900, ALL1955-57), and the 4-cylinder 4000 series (1958-64). This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5 8" ID, outlet 1-3 4" OD. (Part No: M103) $41.22 [Enlarge Picture] Muffler, Horizontal - For Models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 4-Cyl 2000(1953-1964), 800, 820, 840, 900, 950, 960, (1955-1957), 4-CYL 4000 Series(1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length = 2-1 4in, Inlet tube ID = 1-5 8in, Shell length = 13in, Shell diameter = 3-1 4in, Outlet tube length = 2-1 4in, Outlet tube OD = 1-5 8in., Muffler overall length = 17-1 2in. (Part No: NAA5230E) $29.52 [Enlarge Picture] Vertical Exhaust Pipe(Less Muffler) - For Models NAA, Jubilee501, 600, 700, 4-Cyl 2000(1953-1964), 800, 900(1955-1957), 4-CYL 4000 Series(1958-1964).All with 134 and 172 CID gas engines.Kit includes exhaust pipe with clamp.Does not include muffler. (Part No: NAA55237A) $34.11 [Enlarge Picture] Vertical Muffler & Pipe Assembly - For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11 16 inch inlet and 1 3 4 inch outlet. This is one piece welded construction. (Part No: FD2110) $56.65 [Enlarge Picture] Vertical Muffler & Pipe Assembly - For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee all with gas engines. Vertical Muffler & Pipe 2 piece Assembly has 1 3 4 inch inlet and 1 3 4 inch outlet. Comes with clamp to fasten muffler to pipe. (Part No: FD1210) $39.95 [Enlarge Picture]   Fuel System / Air Intake Air Cleaner Assembly - For NAA, Jubilee, 600. Restoration Quality Air Cleaner Assembly. Includes cup. Also replaces EAE9600D. (Part No: 312917) $99.63 Air Cleaner Clip - For Models: NAA, Jubilee, 600, 700, 800, 900. (Part No: S.61646) $3.98 Air Cleaner Cup - For Models: NAA, Jubilee, 600, 700, 800, 900. 4 7 8 inch diameter. Replaces OEM # B5NN9658A. (Part No: S.60583) $28.96 Air Cleaner Cup Gasket - Mounting gasket for Air Cleaner Cup S.61648 and S.60583. For models 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: S.61647) $3.83 [Enlarge Picture] Air Cleaner FIller - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2in x 3-1 4in. (Part No: S.43231) $8.78 [Enlarge Picture] Air Funnel - For models NAA, Jubilee, 600, 700, 800, 900 (2000, 4000 ALL < 1964) (Part No: NAA9684A) $22.84 [Enlarge Picture] Air Hose to Carburetor - For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3 8 inches long, 1 1 2 inch inside diameter. (Part No: 9N9652) $2.12 [Enlarge Picture] Carb Gasket Set - For all Models 1953-1957, using Marvel Schebler carburetor. (Part No: EAF9502) $6.45 [Enlarge Picture] Carburetor Elbow & Strainer - For Models: 2N, 8N, 9N, NAA, NAB, Jubilee. (Part No: 9N9553) $3.31 [Enlarge Picture] Carburetor Float, Small Bowl - Small bowl carburetor Float for Marvel Schebler carbs (2 3 8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (yr): 134 CID (1953-1954) or 172 CID(1955-1957) gas engines on tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000. (Part No: 9N9550A) $12.51 [Enlarge Picture] Carburetor Kit, Basic - Basic Carburetor kit with Viton Needle and Seat. For Models: 2000, 501, 600, 601, 700, 701, NAA, Jubilee. For Marvel-Schebler TSX428, TSX580, EAE9510C, EAE9510D. (Part No: BK47V) $21.70 [Enlarge Picture] Carburetor Kit, Basic - Kit for Zenith 12493 and 13879 carb used on NAA, Jubilee. (Part No: Z103) $26.36 [Enlarge Picture] Carburetor Kit, Comprehensive - For Models: NAA, Jubilee 1953-64 with 134 CID gas engine, 600 & 700 1955-1957 with 134 CID gas engine, all with a Marvel-Schebler TSX428 or TSX580. Complete Carburetor Rebuild Kit (Part No: C547V) $43.68 [Enlarge Picture] Carburetor Shaft - Throttle shaft and lever. For Models: 600, 700, 800, 900, NAA, Jubilee. (Part No: 312951) $13.90 [Enlarge Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: NAA, Golden Jubilee replaces TSX428. Center to center on the 2 mounting bolts is 2 1 4 inches. Made in USA, 1 year warranty. (Part No: 13879) $167.14 [Enlarge Picture] Carburetor, Rebuilt - Rebuilt carburetors are sometimes hard to keep in stock. We will try to fill your order whenever possible and as quickly as possible. Please allow up to one week for shipping of a rebuilt carb. If you have a good core, we can rebuild yours. Turn around time is about 1 week and you do not have the core charge. Call us for order information if you would like to send in your core. Rebuild cost does not include float. (Part No: CARBNOTE) $0.0 Carburetor, Rebuilt - Fits NAA, Jubilee - replacement for OEM TSX 428. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1304-CARB) $147.39 Choke Cable - Universal choke cable 72inches long, 7 16 inch thread dia. (Part No: CC72) $11.22 [Enlarge Picture] Choke Fly Assembly - Choke fly assy. 1-5\16 dia. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549) $8.25 [Enlarge Picture] Cyclone Cup and Spring Assy - Only for those tractors (1939-1964)that used the CYCLONE air cleaner assy which MAY include: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verifiy the type of air cleaner you have before ordering. (Part No: 230053) $22.56 [Enlarge Picture] Cyclone Air Cleaner Glass Jar - For 8N, 2N, 9N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cylone Air Cleaner Glass Jar (Jar Only) Screw on type. Exactly Like Original for tractors that used the 'Cyclone' Air Cleaner only. (Part No: 230056) $23.31 [Enlarge Picture] Fuel Filter, In-Line, 1/4 inch - Inlet 1 4, outlet 1 4, OD 1-29 32, length 4-1 16. Comes with 2 hoses and 4 clamps. (Part No: 6511393) $6.50 [Enlarge Picture] Fuel Filter, In-Line, 3/8 inch - Inlet 3 8, outlet 3 8, OD 1-29 32, length 3-7 8. Comes with 2 hoses and 4 clamps. (Part No: BF836) $5.98 [Enlarge Picture] Fuel Filter, In-Line, 5/16 inch - Inlet 5 16, outlet 5 16, OD 1-29 32, length 4-5 32. Come with 2 hoses and 4 clamps. (Part No: BF840) $5.58 [Enlarge Picture] Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5 16, outlet 5 16, OD 2-1 8, length 3-21 32. (Part No: BF7736) $5.94 [Enlarge Picture] Fuel Sediment (SHORT) Bowl Assy - Universal assembly complete with fittings. For tractors 9N, 2N, 8N, NAA, Jubilee. Replaces 2N99155B & NAA9155B w short bowl. (Part No: 2NAA9155B) $20.16 [Enlarge Picture] Fuel Sediment Glass Bowl With Gasket - 2 in. Glass Bowl W gasket fits NAA9155B and 2N9155B sediment bowls. Includes gasket. Fits 2N, 9N, 8N, NAA, Jubilee. (Part No: 9N9162) $2.05 [Enlarge Picture] Fuel Tank - For Gasoline engines (not for Diesel)11 gallon, No opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. (fuel line must be modified) fits: NAA, Jubilee 1953-54; 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NAA600800G) $196.08 [Enlarge Picture] Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $33.66 [Enlarge Picture] Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $59.99 [Enlarge Picture] Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3 8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $22.14 [Enlarge Picture] Needle Valve - Viton float valve needle, seat & gasket assembly. Tractors: 9N, 2N, 8N, (1939 to 1952. (501, 601, 701, 600, 700, NAA, Jubilee 4-cyl 134 CID gas engines 1953 to 1957), (2000 1962-1964). (Part No: C3NN9564A) $4.01 [Enlarge Picture] Needle Valve - Viton float valve needle, seat & gasket assembly. For Models: (501, 601, 701, 600, 700, NAA, Jubilee, 2000, 800, 900, 801, 901, 4000 all with 134 or 172 CID gas engines from 1958-1964). (Part No: C3NN9D532A) $6.04 [Enlarge Picture] Screen - Air cleaner funnel screen. For tractors: NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964)TIS (Part No: NAA9669A) $11.78 [Enlarge Picture]   Gauges Ammeter - For all models to 1958. Terminal type Ammeter. 30 - 30. Chrome Ring. Replaces FAD10850A. (Part No: A0NN10670A) $7.84 [Enlarge Picture] Hourmeter, Analog - 2", black, 12-24 volt. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $43.74 [Enlarge Picture] Instrument Panel Light Assembly - 6 Volt Light Assembly. For Models: 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 8NN14662A) $27.03 [Enlarge Picture] Instrument and Gauge Kit 4 Speed - For NAA, Jubilee, 600, 700 with 4 Speed Transmission, 800, 900 - ALL 1953-57. Instrument and Gauge Kit contains: Proofmeter, Oil Gauge - 80 lb., Ammeter - 30 Amp, Temperature Gauge and Instrument Lamp Assembly - 6V. (Part No: FDGAUGEKIT_4SP) $86.66 [Enlarge Picture] Instrument and Gauge Kit 5 Speed - For NAA, Jubilee, 600, 700 with 5 Speed Transmission, 800, 900 - ALL 1953-57. Instrument and Gauge Kit contains: Proofmeter, Oil Gauge - 80 lb., Ammeter - 30 Amp, Temperature Gauge and Instrument Lamp Assembly - 6V. (Part No: FDGAUGEKIT_5SP) $86.66 Oil Pressure Gauge - For Models: 2N, 8N, 9N, 600, 700, 800, 2000, 4000, NAA, Jubilee. all before 1964. Oil Pressure Gauge, 40 lbs., 2" Body Diameter. Replaces OEM#'s Ford:``FAD9273A and Massey Ferguson:506902M92. (Part No: S.61171) $11.28 [Enlarge Picture] Oil Pressure Gauge Kit, Universal - Complete assembly w oil tube and mounting hardware, Lighted. 80 psi. (Part No: SSW0002) $10.95 [Enlarge Picture] PROOF METER CABLE (STEEL) - Ford Steel Jacketed Proof Meter Tach Cable 30 1 2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365B_STEE) $20.50 Tachometer (Proofmeter) - For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 - all with 4-cylinder engines and 4-speed transmissions (1953-1964) (Part No: C3NN17360N) $25.00 [Enlarge Picture] Tachometer Cable - Ford Proof Meter Tach Cable 30 1 2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365B) $17.96 [Enlarge Picture] Temperature Gauge - Chrome Rim - For Models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2 inch Face Diameter, 34 inch Capillary Tube Length. Replaces FAD10883A, and C3NN18287A.. (Part No: C3NN18287A-Chro) $22.22 [Enlarge Picture] Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2" Diameter, 34" Capillary Tube Length. Replaces FAD10883A. (Part No: C3NN18287A-Blac) $22.22 [Enlarge Picture] Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8V to 16V range, lighted dial, fits 2" diameter hole. For tractors that use 12V electrical system. Chrome bezel with black background, white letters and white pointer. (Part No: VOLT12LT) $17.76 [Enlarge Picture]   Hitch / Drawbar CHAIN, STABILIZER KIT - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. 15# (Part No: SK102CH) $49.90 [Enlarge Picture] Chain - CHAIN, Fixed drawbar safety chain assy, EXACT OF ORIGINAL. FOR tractors: 9N, 2N, 8N, Jubilee, NAA (1939-1954). (Part No: 9N5370) $63.99 [Enlarge Picture] Crank Arm, Leveling Box - For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4000, 4110, 420, 4600, 600, 700, 800, 8N, 900, 9N, NAA. (Part No: C5NN594E) $14.95 [Enlarge Picture] Drawbar Check Chain Kit - Consists of 1 pair anchors, 2 eyelets, 2 chains, 4 clevises with pins and hardware for the following tractors: 9N, 2N, 8N (1939-52), NAA (1953-54), Jubilee, 600, 700, 800, 900 Series (1955-57), Dexta, Super Dexta (1958-64), 2000, 4000 (1962-64), 2000, 3000, 4000 (1965-75), 2600, 3600, 4600 (1975-81), 2610, 3610, 4610 (1981-1990). (Part No: DCK1) $27.06 [Enlarge Picture] Drawbar Link Check Chain Anchor - Anchor, Drawbar link check chain (pair). For 2000, 2600, 2610, 2N, 3000, 3600, 3610, 4000, 4600, 4610, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, SUPER DEXTA, Jubilee. (Part No: 957E5967) $22.06 [Enlarge Picture] Drawbar Lock - For CAT I drawbars only ( drawbars that are 1in. thick x 2-1 2in. width) . Prevents drawbar from rotating. (Part No: 49A29) $26.72 [Enlarge Picture] Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1 2" L Hole Center To Hole Center, 2 1 2" Wide, 1 1 8" Thick (drawbar fits lift between lift arms). (Part No: 9N5182) $54.40 [Enlarge Picture] Drawbar, Standard, Red - Drawbar is 1" x 2-1 2" x 26", with 7 8" pins, (Category I). (Part No: 9N5182A) $43.56 [Enlarge Picture] Eyelet Assy, Check Chain - Fits 9N, 8N, NAA, Jubilee, 900, (2000 4-cyl RowCrop 1 1953 & newer), (4000 RowCrop 1 1953 & newer). (Part No: EC0N660A) $4.18 [Enlarge Picture] HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3 16, length 3.75), four(4) of HP-4 (wire dia 5 32, length 2 15 16), , four(4) of HP-5 (wire dia 1 8, length 2 9 16), , and three(3) of HP-6 (wire dia 3 32, length 1 5 8). (Part No: HPA15X) $4.99 [Enlarge Picture] HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3 16, length 3.75), four(4) of HP-4 (wire dia 5 32, length 2 15 16), , four(4) of HP-5 (wire dia 1 8, length 2 9 16), , and three(3) of HP-6 (wire dia 3 32, length 1 5 8). (Part No: HPA15X) $4.99 [Enlarge Picture] LINCH PIN - Package of 10 linch pins. Pin diameter 1 4 inch, useable length 1 1 4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $4.90 [Enlarge Picture] LINCH PIN - Package of 10 linch pins. Pin diameter 5 16 inch, useable length 1 1 4 inch, Ring diameter 1 5 8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $3.90 [Enlarge Picture] LINCH PIN - Package of 10 linch pins. 7 16" dia. pin x 1-3 4" useable length, 1-5 8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $3.90 [Enlarge Picture] LINCH PIN - LINCH PIN Package of 10 linch pins. 3 16" O.D. pin x 1-1 4" Long.***Enter 1 for package of 10** (Part No: DKP316) $3.90 [Enlarge Picture] Leveling Box Assembly - Left - Left Hand Rod and fork assembly, hydraulic lift, left hand. For 9N, 2N, 8N, NAA, Jubilee, tractors. 1939 - 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 8N564B) $47.99 [Enlarge Picture] Leveling Box Assembly - Right - Right Hand Leveling Box Assembly with fork. Adjusts 20.25 to 25.25 inches. For 2N, 8N, 9N, NAA, Jubilee, all 1939-1964. (Part No: 8N577A) $57.73 [Enlarge Picture] Leveling Box Knuckle Pin - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611. 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981, 9N, 2N, 8N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). Sold in quantities of 2, price is for 1. 5 8 Pin Dia. 2 7 8 usable length. Takes our 3 16 Linch pin (P N DKP316). (Part No: 9N595) $1.64 [Enlarge Picture] Leveling Box Yoke Rod, LH - Left Hand side. Rod dia is .750". For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4110, 420, 600, 620, 30, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 8N, 9N, NAA, Jubilee. (Part No: C5NNB863A) $38.89 [Enlarge Picture] Lift Arm - For 8N, 2N, 9N, NAA, Jubilee. Lower 3-Point lift Arm. Center to Center measurement available in three lengths. 31-3 4, 32, or 32-1 4.Please specify in comments section which Length you prefer. (Part No: 9N555B) $51.53 [Enlarge Picture] Link End - Plated, forged, 1-1 4" thread, left hand, 1" hole. (Part No: RE1717L) $29.96 [Enlarge Picture] Link End - Plated, forged, 1-1 4" thread, right hand, 1" hole. (Part No: RE1718R) $30.76 [Enlarge Picture] Lower Link Support Pin - Lower link support pin. For 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA, Jubilee. (Part No: NCA563C) $13.30 [Enlarge Picture] Pin, Hydraulic Lift Yoke - For Models: 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B) $9.44 [Enlarge Picture] Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. (Part No: HF141101) $255.69 Shaft Level Box - Shaft and gear, length 14; thread length 4. For 2000, 2N, 4000, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: NCA579B) $9.86 [Enlarge Picture] Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7 8" hole dia. (Part No: 230042XHD) $19.90 [Enlarge Picture] Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 9N, 2N, 8N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets w pins & hardware. 31.5 inches center to center. ** $15 ADDED TO SHIPPING DUE TO WEIGHT ** (Part No: 231253XHD) $60.02 Stay Strap, Lower Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5375) $7.58 [Enlarge Picture] Stay Strap, Upper Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Part No: 9N5374) $11.40 [Enlarge Picture] Swinging Drawbar - Drawbar is replacement drawbar for the swinging drawbar kit. 600, 800, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. (Part No: C0NN805F) $54.89 [Enlarge Picture] Swinging Drawbar Kit - For NAA, 600, 8N. Swinging Drawbar Kit. Painted Red. Contains Drawbar: 29.375" long, 2.00" wide, 1.00" thick, Rear Drawbar Hanger, Drawbar Clevis Assembly and Drawbar Clevis Pin. ADDITIONAL $10 SHIPPING FEE DUE TO WEIGHT. (Part No: 49A34R) $99.48 [Enlarge Picture] Thrust Bearing - Bearing assembly. For 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: 9N554) $3.94 [Enlarge Picture] Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 16 to 24 inches overall. Dichromate plated. (Part No: JSA1012C) $23.90 [Enlarge Picture] Top Link Rocker - For 9N, 2N, 8N, NAA, Jubilee, 600, 800 Hi Clearance, 601, 801, 2000 4 cyl Hi-Clearance, 4000 4 cyl Hi-Clearanc. (Part No: NCA535A) $59.90 [Enlarge Picture]   Hydraulic System Coupler Flange - FORD: Drive flange; 5 8" round bore with set screw 1 4" x 3 8" #SSH4-6. HYDRAULICS: Drive flange; 5 8" round bore with set screw 1 4" x 3 8" #SSH4-6. 2-1 4" b-b (Part No: L36-6) $59.9 [Enlarge Picture] Cylinder Seal Kit, For 2 in. cylinders - For side and top link cylinders. Seal Repair Kit for 2in. cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: HSK2002) $16.96 [Enlarge Picture] Cylinder Seal Kit, For 3 inch Cylinders - For side and top link cylinders. Seal Repair Kit for 3in. cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Part No: HSK3002) $18.60 [Enlarge Picture] Cylinder, Side Link - Hydraulic side link cylinder, 2" bore. (Part No: HSL2201) $207.17 [Enlarge Picture] Draft Control Plunger - For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta. (Part No: 8N541B) $32.29 [Enlarge Picture] Draft Control Plunger Spring - Fits between Hydraulic plunger & yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 9N547B) $31.18 [Enlarge Picture] FILTER ASSEMBLY, HYDRAULIC OIL - 20 GPM Capacity Assembly with 10 Micron Element. 3 4 NPT ports. 4 inch diameter-7-1 2 inches long. Equipped with standard By-Pass Valve-opens at 15 PSI. Includes filter element. Order Replacement Element as part number 1A9021 (Part No: SF1-10) $29.90 [Enlarge Picture] FILTER ASSEMBLY, HYDRAULIC OIL - Full Flow Hydraulic Oil Filter. Equipped with standard By-Pass Valve-Opens at 15 PSI. Spin-On Filter Element. 20 GPM Capacity Assembly with 25 Micron Element. 3 4" NPT ports. 4" dia., 7-1 2" long. (Part No: SF1-25) $29.90 [Enlarge Picture] FILTER ASSEMBLY, HYDRAULIC OIL - Full Flow Hydraulic Oil Filter Assembly. Equipped with standard By-Pass Valve-Opens at 15 PSI. Spin-On Filter Element. 60 GPM Capacity Assembly with 10 Micron Element. 1-1 4" NPT ports. 5-1 2" dia., 11-1 2" long. (Part No: SF2-10) $74.90 [Enlarge Picture] FILTER ASSEMBLY, HYDRAULIC OIL - Full Flow Hydraulic Oil Filter Assembly. Equipped with standard By-Pass Valve-Opens at 15 PSI. Spin-On Filter Element. 60 GPM Capacity Assembly with 25 Micron Element. 1-1 4" NPT ports. 5-1 2" dia., 11-1 2" long. (Part No: SF2-25) $74.90 [Enlarge Picture] FILTER ELEMENT - 10 Micron replacement element for SF1-10. (Part No: 1A9021) $9.90 [Enlarge Picture] FILTER ELEMENT - 25 Micron replacement element for SF1-25. (Part No: 1A9023) $9.90 [Enlarge Picture] FILTER ELEMENT - 10 Micron replacement element for SF2-10. (Part No: 1A9251) $28.90 [Enlarge Picture] FILTER ELEMENT - 25 Micron replacement element for SF2-25 filter assembly. (Part No: 1A9253) $29.90 [Enlarge Picture] Felt, Spring Seat - Hydraulic lift draft control spring seat. For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529) $3.71 [Enlarge Picture] Friction Disk - Hydraulic Control Lever. 3" dia. 1 2" hole. For Models: 2N, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, (2000 & 4000 4 cyl.). Price is for each. (Part No: C5NN518B) $.99 [Enlarge Picture] HOSE SLEEVE, NYLON - Comes in a 50 foot roll at $1.39 per foot. Hose Sleeve, black in color. Outside flat 1.88 inches. Nom I.D. 1.14 inches. Abrasion resistant fabric sleeve. Extends indivdual hose life. Excellent product for holding two or more hoses in a single bundle. (Part No: NHS114X600) $69.50 [Enlarge Picture] Hydraulic Hoses, Universal - Can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Hoses) $00.00 Hydraulic Lift Cover Repair Kit - For NAA 1953-64, Jubilee. Lift Cover Repair Gasket Kit. (Part No: LCRK5354) $5.98 [Enlarge Picture] Hydraulic Lift Piston - Single groove piston 2-1 2" dia., groove is centered 1 1 4 inch from bottom of piston. O-Ring available as NAA533A and Back Up Washer as NAA473A. For Models: NAA, NAB, 2N, 8N, 9N. (Part No: NAA530B) $26.20 [Enlarge Picture] Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900. Replaces NCA526A and 957E526. (Part No: 86563314) $35.53 [Enlarge Picture] Hydraulic Lift Ram Arm - For NAA, Jubilee. (Part No: NAA545A) $106.08 Hydraulic Lift Shaft - For Models:9N, 2N, 8N, NAA, Jubilee, 2000, 4000, 600, 700, 800, 900. Hydraulic Lift Shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 2N, 8N, 9N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART # NCA551A & 2 - 7 16"-20 X 11 16" BOLTS THAT ARE CURRENTLY NOT AVAILABLE FROM YESTERDAY'S TRACTOR]. (Part No: NCA544B) $212.90 [Enlarge Picture] Hydraulic Lift Shaft Arm - For 2N, 8N, 9N, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 gas. (Part No: 9N543B) $86.34 [Enlarge Picture] Hydraulic Lift lever Assembly - For 9N, 2N, 8N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift Control Lever with Ball End 2N512, Lift Control Plate (Cast Aluminum as original) 2N-516A2 and Friction Disc C5NN518B. (Part No: 2N512) $36.07 [Enlarge Picture] Hydraulic Pump Control Valve - Hydraulic Pump Control Valve Assy. For Models: NAA, Jubilee. (Part No: NAA638E) $47.81 [Enlarge Picture] Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3 4" diameter, 9-1 4" overall length. End A type: key, 3 4" size , End B type: 6 spline, 3 4" size. Associated components end A flex. cplr: L601-14 (3 4" bore drive flanges both sides), end B hub: 1". Fits: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 194355) $25.90 [Enlarge Picture] Hydraulic Pump Gear Housing - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA905C) $138.60 [Enlarge Picture] Hydraulic Pump Hub - Hydraulic Pump Hub for Sherman 54 Series Loader. Hydraulic Pump Hub 3 7\8 OD, 2 3\4 Center to center on holes. 6 spline center bore, 3\4 ID. (Part No: 54C2055) $32.95 [Enlarge Picture] Hydraulic Pump Repair Kit - Hydraulic Piston Type Pump Repair Kit. Services 1953-1964 four cylinder gas and diesel tractors. For Models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: CCPN600AB) $34.90 [Enlarge Picture] Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies (Part No: NCA966E) $50.40 [Enlarge Picture] Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For Models: NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1201A) $5.70 [Enlarge Picture] Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For Models: NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1202A) $4.30 [Enlarge Picture] Hydraulic Spring Seat - For Models: 9N, 2N, 8N, NAA, 600, 900 (1948-1954). (Part No: 9N525B) $7.83 [Enlarge Picture] Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030) $387.96 [Enlarge Picture] Moreflex Drive Kit - Morflex Series 352 coupler complete with 2 drive flanges(3 4in w key), set screws, 4 bolts & lock nuts. Mounting is four 5 16in. holes spaced 2-1 4in apart. (Part No: L601-9) $57.47 [Enlarge Picture] Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7\8 dia. shaft. 5\16 dia. bolt holes 2-1\4 on center. For 352 (Part No: L78-13) $30.45 [Enlarge Picture] Seat, Hydraulic Lift Draft Control Spring - Exact of original. Fits all models (1939-1964). (Part No: 2N624) $6.22 [Enlarge Picture] Swivel - Draft Control - For Models: NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 957E692) $23.28 [Enlarge Picture] Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9 16-18 O-ring boss with two adapters 9 16-18 ORBM x 1 4 NPTM 90 degree swivel. 3 cylinder bore, 8 stroke length, 26 closed length, 12-7 16 barrel length, 1 rod end diameter, 1-3 4 rod end width, 1 diameter base end. (Part No: HTL3103) $250.93 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. 5000 PSI Gauge. Serves as master gauge to check pump & valve output. Normal recommendation use gauge with twice the capacity of average hydraulic working pressure. (Part No: PMHG2) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG60) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 100 LB Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG100) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 160 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG160) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 200 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG200) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG300) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1 4 NPT male brass fitting. (Part No: GG400) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG600) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG1000) $20.96 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 1500 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG1500) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 2000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG2000) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 3000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG3000) $20.90 [Enlarge Picture] UNIVERSAL PRESSURE GAUGE, HYDRAULIC - 5000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Part No: GG5000) $20.90 [Enlarge Picture] Wobble Shaft Plate - For Models: 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Part No: NCA859A) $90.77 [Enlarge Picture]   Lights HEADLIGHT SET - 12 VOLT - For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. EXACTLY like original with TRACT-O-LITE stamped into housing. (Part No: 2N13005-12V) $134.35 [Enlarge Picture] HEADLIGHT SET - 6V - EXACTLY like original with TRACT-O-LITE stamped into housing for models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. Spare sealed beam bulbs available as p n L4019. (Part No: 2N13005-6V) $142.07 [Enlarge Picture] Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, gray - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HG-12V) $29.00 [Enlarge Picture] Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HB-12V) $29.00 [Enlarge Picture] Headlamp Assembly, 12 Volt, Blue - (Single) 12-volt, metal body & bezel, blue enamel finish, 5-3 4" diameter for the following tractors: NAA, Jubilee, 501, 600, 601, 701, 801, 901 (1958-1962), 2000, 3000, 4000, 5000, 7000 (1965-75). Does not match original. (Part No: 310068) $50.99 [Enlarge Picture] Headlamp Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body & bezel, grey enamel finish.For Models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Part No: 310066F) $49.90 [Enlarge Picture] Headlight Bracket - ROUND right or left side. For Models: 8N, NAA, Jubilee {1949-1954}. (Part No: 8N13472) $8.27 [Enlarge Picture] Knob, Light Switch - Aluminum. For Models: 9N, 2N, 8N, NAA, Jubilee. (Part No: 9N9703) $7.08 [Enlarge Picture] Light Switch - For Models: 9N, 2N, 8N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B) $8.50 [Enlarge Picture] Light Switch w/ Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $26.66 [Enlarge Picture] Sealed Beam Bulb - 12 Volt, 3 Lug Terminal Type. 4-1 2" dia. bulb. (Part No: D6NN13N007A) $25.50 [Enlarge Picture] Tail Light Assembly, 6 Volt - Light assembly has FOMOCO lens (plastic). For 6 volt tractors made between 1953 to 1954 including NAA & Jubilee , also fits the following models: (Caution; may not fit later models of these tractors): 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: FAA13402A) $35.85 [Enlarge Picture] Tail Light Lens - Plastic 4 in. lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3in. apart). Fits tractors 1953 & newer. (Part No: FDV13450A) $11.26 [Enlarge Picture] Tail Light Wire Clip - For 2N, 8N, 9N, NAA and Jubilee to 1954. Rear Lamp Wire Clip - 6 required per tractor. (Part No: 9N17668) $2.21 [Enlarge Picture] Worklight Kit, 6 Volt, Chrome - Kit includes, 6" steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount(socket), and switch. Assembly required. For Models: 2N, 9N, 8N, NAA, 600, 800. (Part No: S.43377) $62.70 [Enlarge Picture]   Miscellaneous CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof xtension Cables. (Part No: CC7M1C) $335.61 [Enlarge Picture] Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately. (Part No: B257X) $402.16 [Enlarge Picture] Canopy Mounting Kit, 2 Post - Mounts the canopy to all our 2 post ROP frames except EMF1 (Hoop Type Frame). (Part No: B6603) $51.48 [Enlarge Picture] Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $53.79 Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $77.88 Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. (Part No: B257XSTD) $292.51 [Enlarge Picture] Deluxe Canopy, 3 Bow - Red. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $153.92 [Enlarge Picture] Deluxe Canopy, 3 Bow - Yellow. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100Y) $153.92 [Enlarge Picture] Deluxe Canopy, 3 Bow - Blue. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100B) $153.92 [Enlarge Picture] Deluxe Canopy, 5 Bow - Red. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504R) $199.90 [Enlarge Picture] Deluxe Canopy, 5 Bow - Yellow. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504Y) $199.90 [Enlarge Picture] Deluxe Canopy, 5 Bow - Blue. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504B) $199.90 [Enlarge Picture] Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $132.57 [Enlarge Picture] Grease Gun - 3-way fill cartridge gun. (Part No: C3NN17125A) $23.06 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, (2000, 4000 thru 1964). (Part No: 1212422) $299.95 [Enlarge Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: (NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840 w loader, backhoe). (Part No: 1411235) $299.95 [Enlarge Picture] ROP Frame Assembly - Cross Bar type Roll-Over Protection frame. Fits 9N, 2N, 8N, DEXTA, NAA, Jubilee, 501, 600, 601, 700, 701, 2000, 2100, 3000. ** ITEM IS TRUCK SHIPPED (100 lbs)- $85 IS ADDED TO SHIPPING **. (Part No: MF1) $558.50 [Enlarge Picture] Rain Cap - This rain cap is for a 5.00 inch pipe. (Part No: WC15) $16.56 [Enlarge Picture] Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $37.50 [Enlarge Picture] Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0002) $182.83 [Enlarge Picture] Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $168.27 [Enlarge Picture] Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0001) $209.43 [Enlarge Picture] Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $194.87 [Enlarge Picture]   Oil System Filter Breather - Rocker Arm Cover Vent Element. Tractors: NAA, 600, 700, 800, 900, 2000, 4000. (Part No: EAF6866A) $5.99 [Enlarge Picture] Oil Filler Cap with Element - For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, ``801, 811, 821, 841, 851, 861, 871, 881, ``900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Also replaces OEM 8N6766B. (Part No: 310030) $9.08 [Enlarge Picture] Oil Filter - Cartridge Type. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965. Comes with gasket. Measures 4 3 4 inches long, 4 inch diameter with holes in each end of 3 4 inch. (Part No: CPN6731B) $9.28 [Enlarge Picture] Oil Filter - Spin-On Type. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 3000, 4000, 5000, 2600, 3600, 4600, 5600, 6600, 2610, 3610, 4610, 5610, 6610. Also replaces, 86546614 and D9NN6714EA. (Part No: E7NN6714AA) $9.17 [Enlarge Picture] Oil Filter Mounting Gasket - This gasket fits behind the mounting plate that the filter screws on to. For spin on type oil filters only. For Models: 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A) $2.95 [Enlarge Picture] Oil Filters, Tri Pack - Three pack of cartridge Type oil filters. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965. Measures 4 3 4 inches long, 4 inch diameter with holes in each end of 3 4 inch. Comes with gasket. (Part No: CPN6731BTRIPACK) $23.84 [Enlarge Picture] Oil Pan Plug Kit - Gasket, oil pan plug & screen assembly. For all gas models 1939-1964. Fits 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 (Part No: 9N6730WG) $13.14 [Enlarge Picture] Oil Pump Gear & Shaft - Gear and shaft assy. For Models: NAA, Jubilee. (Part No: EAA6608C) $41.38 [Enlarge Picture] Oil Pump Kit, Rotor Type - Kit, oil pump shaft & rotor. For 4-cylinder GAS engine. For Models: 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, NAA, Jubilee. All with either 134 or 172 CID engines. (Part No: C3AE6608B) $43.99