Low Prices - Fast Shipping - Thousands of Items in Stock!

Secured by SSL	Order online or call (800) 853-2651

• Tractor Parts • Manuals • Videos & DVDs • Hats • Books Featured Item    I&T Shop Manuals • Contact Us • Shipping Rates • Return Policy • Ordering Help • Company Info • Parts Warranty • Tractor Info    (YT Home)

Ford NAA (Golden Jubilee) Parts [ Show All Pictures ]   Brakes Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255) $59.15 [Show Picture] Brake Backing Plate Felt Seal - For models 8N, NAA, JUBILEE. (Part No: 8N2217) $3.56 [Show Picture] Brake Drum - For 8N, NAA, Jubilee. An additional $7.00 will be added to shipping per drum (heavy item). (Part No: 8n1126) $93.46 [Show Picture] Brake Drum Repair Kit - For 8N, NAA Jubilee. Replaces: 8N2027B Contains: Anchor (2), H2041 Adjuster Screw, 8N2217 Felt Backing Plate Seal, 8N2048 Adjuster Socket, 8N2223 Adjuster Nut, 8N2049 Adjuster Spring, 8N2297B Return Spring, 8N2299 Secondary Spring LH only. Brake Hardware Kit. (Part No: 8NAA2250) $22.54 [Show Picture] Brake Shoes - Brake Shoes For 8N, NAA, Jubilee - Set of 4. (Part No: 8N2200B) $46.25 [Show Picture] Bushing - Brake cross shaft bushing. Press into transmission housing. For tractors: 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477) $6.82 [Show Picture]   Clutch Clutch Alignment Tool - 1-3 8 inch, 10 spline, .670 inch pilot. For Models with single clutch: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: S.70930) $14.95 [Show Picture] Clutch Disc - 10" Clutch Disc NAA, Jubilee, 600, 700, 800, 900 (4 speed to serial # 14257) - 10 Spline x 1 3 8" Hub - This Is A Retrofit For 9" Clutch, Must Use 10" Pressure Plate. (Part No: NCA7550A) $70.35 [Show Picture] Clutch Disc, New - 9" Clutch Disc, Hub-1 3 8 inch, Splines-10, 6 springs. Fits: 9N, 2N, 8N, NAA (4 speed), NAB, Jubilee, 600, 700, 800, 900 (to serial # 14257), 1800, 2130. Improved from original by added springs. (Part No: 91A7550WHD) $42.58 [Show Picture] Clutch Kit, 9 Inch, Single Clutch - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. 9" Clutch & Pressure Kit For single clutch models, 3 & 4 speed transmission. Contains NEW: clutch cover, disc, release bearing, pilot bearing and alignment tool. (Part No: 8N7563K) $125.95 [Show Picture] Clutch Pedal Arm Bushing - For models 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002" I.D. x 1-1 2" long. Minimum Order Qty is 2. (Part No: 8N7508B) $6.60 [Show Picture] Clutch Pedal Shaft Bushing - 7 8 Inch inside diameter. For Models: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A) $6.50 [Show Picture] Clutch Release Arm Kit - For 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm Kit contains: eyebolt #355584S8, pin #8N7533, and clutch release arm #8N7511B. (Part No: S.66657) $48.60 [Show Picture] Pilot Bearing - For Models: 9N, 2N, 8N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A) $4.06 [Show Picture] Pressure Plate - 9in. single, flat flywheel. For Models: 1800, 2130, 2N, 8N, 9N, NAA, NAB, Jubilee, 600, 700, 800, 900 w single clutch. (Part No: 8N7563) $74.04 [Show Picture] Release Bearing - For Ford Tractors with 9" and 10" Single Clutch 1939-1964. (Part No: 78-7580A) $18.66 [Show Picture] Release Bearing Hub - For Models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 8N, 900, 901, 950, 951, 9N, NAA, Jubilee, NAB. (Part No: 9N7561) $20.39 [Show Picture]   Cooling System Fan Belt - For models 8N late (with side mount distributor), NAA (1952-1954, Jubilee. This belt also works with # 8NL10300ALT Alternator conversion kit. (Part No: 8N8620) $7.79 [Show Picture] Fan Blade - 4 Blade - For 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125" Centers. Diameter is 15.75". (Part No: 8N8600A) $34.45 [Show Picture] Fan Blade - 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D) $57.90 [Show Picture] Fan Shroud - For Models: NAA, Jubilee, 501, 541, 600, 700, 800, 900, 601, 611, 621, 701, 801, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. Fan Shroud, Metal. (Part No: NCA8146A) $62.50 [Show Picture] Radiator - For 4-cylinder GAS engines (before 1965) on: NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Not for HD Industrial & Forklifts (Part No: C5NN8005AB) $229.85 [Show Picture] Radiator Cap - Cap, radiator, 4 psi. For tractors NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4cyl gas & diesel (1953 to 1964 except Majors. (Part No: 1T8100A2) $6.32 [Show Picture] Radiator Drain Tap - Drain Tap-For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. This is also the same tap for the engine block in the 9N, 2N, 8N, NAA engines. (Part No: C9NN8115A) $2.72 [Show Picture] Radiator Hose Set - Used with 4 cylinder 134-172 GAS engine. Includes Upper and Lower hose. 312588 Lower & NAA8260B Upper for: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, ``(2000, 4000 MANUAL steering only). (Part No: 134-172HOSESET) $10.20 [Show Picture] Radiator Hose, Upper - Hose for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, Series. Can replace 310048. (Part No: NAA8260B) $4.25 [Show Picture] Radiator Mounting Pads - Package of 2. For models NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Replaces B9NN8125A. (Part No: 180705M1) $5.90 [Show Picture] Thermostat - 160 degree lo-temp, with gasket. For all gas tractors 1953 to 1964. (Part No: EAF8575BWG) $9.80 [Show Picture] Thermostat Housing - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Gasket available as part #EAF18255A, request in comments section of order form. (Part No: 310031) $35.85 [Show Picture] Water Pump - For NAA, Jubilee (Part No: CDPN8501B) $46.13 [Show Picture] Water Pump Kit - Repair kit. For 2N, 8N, 9N, NAA, Jubilee (Part No: CPN8591B) $26.54 [Show Picture] Water Pump Pulley, Single Groove - For Models: NAA, Jubilee. Single Groove Water Pump Pulley. (Part No: EAF8509A) $25.90 [Show Picture]   Decals and Emblems Decal, Fear This Ford - 12-1 2 x 3. For all Ford tractors. (Part No: S.67825) $16.98 [Show Picture] Ford Script Painting Mask - Includes 1 smaller 7-1 4" x 1-3 4" and 1 large 9" x 3" painting masks. For Models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.67163) $18.58 [Show Picture] Hood Emblem - Restoration quality w studs and retaining clips. For Models: NAA (not Jubilee), 501, 601, 701, 801, 861, 901, 1801, 2031, 4030, 4031, 4040, 4140. Chrome, Gold and red. (Part No: 311231) $64.02 [Show Picture]   Drive Train Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. **$15 ADDED TO SHIPPING DUE TO WEIGHT** (Part No: 8N4235C) $129.90 [Show Picture] Axle Bearing Assembly - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. This includes rear axle bearing and cup. Replaces 9N4222, 2N4221. (Part No: S.18516) $42.95 [Show Picture] Axle Clamp Lock Nut - Clamp lock nut, rear axle, 1-1 4". For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21) $21.98 [Show Picture] Axle Kit, Rear - Kit contains 2 rear axle shaft bearings, 2 Rear axle washers, 2 rear axle housing gaskets, 2 rear axle shaft bearing cup, 2 rear axle nut and lock rings, 2 rear axle shaft gaskets, 2 rear axle seals, 2 rear axle outer oil seals, 2 axle housing to center housing gaskets. For Models: NAA, Jubilee. (Part No: AXLEKIT-NAA) $155.06 [Show Picture] Axle Seal, Outer Pair - For models 8N S N 486753 UP, NAA, Jubilee. Comes in pairs. (Part No: D5NN4115A) $13.78 [Show Picture] Axle Shaft Gasket - For Models: 600, 700, 800, 900, 8N, NAA, Jubilee. ID = 2 inch, OD = 2 1 4 inch. (Part No: 8N4284) $2.20 [Show Picture] Axle Shaft Nut, Rear - 1.25", 18 hex. For Models: (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179) $6.64 [Show Picture] Countershaft - For NAA, Jubilee. Countershaft. (Part No: NAA7111C) $166.29 [Show Picture] Differential Pinion Cone, Front - Bearing, Tapered Cone. For Models: 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, DEXTA 1957-4 1962, NAA, Jubilee 1953-1954. (Part No: BB4621B) $30.95 [Show Picture] Differential Pinion Pilot Bearing - For Models: 2120 W 4 SP.TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 600 W 4 SP.TRANS. SN<54165 - 1958, W 5 SP. S N <196155 -1959, 601 W 4 SP.TRANS. S N 54166> -1958-62, 5 SP. S N 106116> - 1960-64, NAA, Jubilee 1953-1954. (Part No: 81T4625MA2) $35.93 [Show Picture] Gasket, Main Drive Gear Bearing Retainer - For Models: 9N, 2N, 8N, NAA, Jubilee, NAB. Sold in quantities of 5. Price is for 1. (Part No: 9N7086) $0.44 [Show Picture] Gear Shift Lever, w/ Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 3 8in. UNF thread for the shift knob (knob included) (the older shift levers had 5 16in. UNF thread). Note: uses gear shift knob p n BB7213A. Fits: 8N, NAA, Jubilee, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B) $58.06 [Show Picture] Gear, 1st, 4 Speed Transmission - 60 28 tooth. For Models: 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100) $200.14 [Show Picture] Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-64), 8N (1948-52). 17 teeth. (Part No: B9NN7114A) $106.40 [Show Picture] Gear, 3rd, 4 Speed Transmission - 52 tooth. For Models: 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All w 4 speed transmissions. (Part No: 8N7102) $182.70 [Show Picture] Gear, 4th, 4 Speed Transmission - Has 28 & 36 teeth. For Models: 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112) $227.75 [Show Picture] Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B) $91.52 [Show Picture] Gears, 2nd Mainshaft & Countershaft, 4 Speed Transmission - For 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 cyl engines & 4 speed transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set) $154.54 [Show Picture] Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171) $59.90 [Show Picture] Input Shaft - 4 Speed, 15 Spline. For Models: 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 841, NAA, NAB, Jubilee. (Part No: 311203) $260.62 [Show Picture] Main Shaft Connecting Coupling - For 2000, 3000, 8N, NAA, Jubilee, all with 4 Speed Transmission. Main Shaft Connecting Coupling has 21 teeth, 16 spline. (Part No: E6NN7106AA) $45.58 [Show Picture] Oil Pump Gear & Shaft - Gear and shaft assy. For NAA, Jubilee. (Part No: EAA6608C) $20.30 [Show Picture] Oil Seal - Main Drive Gear - Oil Seal For 3 & 4 Speed transmission Main Drive Gear on: 9N, 2N, 8N, 600, 700, 800, 900, NAA, NAB, Jubilee. **Minimum order qty is 2** (Part No: 8N7052A) $4.18 [Show Picture] Pin - Gear Shift - Fits 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000(>1965 (w 3 & 4 Speed transmission). (Part No: 9N7221B) $2.50 [Show Picture] Reverse Idler Assembly - Fits 5 Speed Transmissions '55 - '64. Replaces NDA7723C, NDA7141A, NDA7140A. (Part No: NDA7723C) $248.16 [Show Picture] Shift Knob - Knob, transmission gear-shift lever. For all 4- & 5- speed transmission models (1950-1964 s n 252844 & up). (Part No: BB7213A) $4.95 [Show Picture] Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066) $13.30 [Show Picture] Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For Models: 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067) $11.42 [Show Picture] Transmission Rebuild Kit - For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, Timken bearings and gaskets required for transmission rebuild. (Part No: TSBK5354) $84.14 [Show Picture]   Electrical System (Starters, Generators, Coils, Wiring, etc.) 12 Volt Conversion Kit - 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil. (Part No: NAA10300ALT) $143.22 [Show Picture] Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR) $0.00 Alternator Adjustable Arm - Alternator adjusting arm. For alternator conversion on the following tractors (1953-1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: NAA10303) $23.54 [Show Picture] Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Part No: NAA10302) $31.04 [Show Picture] Alternator, 12 Volt - 12 Volt Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire 'self exciting' alternator has internal voltage regulator (easy to wire). (Part No: 8NE10305SE) $87.73 [Show Picture] Battery Cable - For NAA, Jubilee, 600, 700, 800, 900, all 1953 and later. Starter to Switch Cable. 15" long. Replaces FAA14431B. (Part No: 9N14431B) $8.82 [Show Picture] Battery Cable - For NAA, Jubilee, 600, 700, 800, 900, all 1953 and up. Cable. 10" long. (Part No: D1NN14300G) $7.16 [Show Picture] Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. (Part No: 86H14321A) $11.33 [Show Picture] Cigar Lighter Assembly - Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A) $46.45 [Show Picture] Coil Bracket - Universal Coil Bracket (Part No: R1940) $4.95 [Show Picture] Coil, Heavy Duty - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 2N, 9N early 8N using front mount distributors) (Part No: 40011) $33.92 [Show Picture] Coil, Heavy Duty - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 2N, 9N early 8N using front mount distributors) (Part No: 40011) $33.92 [Show Picture] Coil, High Performance - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $33.92 [Show Picture] Coil, High Performance - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $33.92 [Show Picture] Coil, High Performance (Chrome) - 12-VOLT, Pertronix Chrome 'Flame Thrower' high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $34.63 [Show Picture] Coil, High Performance (Chrome) - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $34.63 [Show Picture] Coil, Ignition 12V - 12 volt, Fits many models. (Part No: D5TE12029AB) $15.36 [Show Picture] Coil, Ignition 6V - Standard 6 volt coil. Fits many models. (Part No: D4PE12029AA) $20.08 [Show Picture] Condenser - For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FET12300A) $2.27 [Show Picture] Distributor - With Slotted Drive Shaft For NAA, Jubilee (Part No: R2892) $339.90 [Show Picture] Distributor Cap - Fits: 8N s n 263844 and up (Side mount), NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 1950 thru 1964 (4 Cylinder) (Part No: NCA12106A) $7.37 [Show Picture] Distributor Driven Gear - For Model: NAA, Jubilee. (Part No: FAD12390A) $42.75 Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 (Part No: FAA12239A) $8.30 [Show Picture] Distributor Point Set - For FDN12127A & 311185 distributor used on NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: D8NN12171AA) $3.89 [Show Picture] Distributor Rotor - Fits the following gas tractors up to 1964: 8N w side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: C0NN12200A) $1.99 [Show Picture] Distributor, Breaker Plate - Deck plate with points & condensor. For NAA, NAB, Jubilee, 8N w\side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). (Part No: FAD12152A) $21.82 [Show Picture] Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor) , NAA, Jubilee, 600, 700, 501, 601, 701, 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A) $89.60 [Show Picture] Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, 600, 700, 501, 601, 701, 800, 900, 801, 901, 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 1244AN6) $90.27 [Show Picture] Electronic Ignition Conversion Kit - 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, 600, 700, 501, 601, 701, 800, 900, 801, 901, 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6) $90.27 [Show Picture] Engine Heater - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 prior to 1965. Core Plug Type Heater - 600 Watts, 2.05" Cup Plug. (Part No: S.07091) $50.95 Ignition Kit With Rotor - Ignition kit contains: points, rotor, condensor. For 8N (side mount distributor), NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: ATK7FAR) $6.99 [Show Picture] Ignition Switch, Keyed - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3 4 inch hole. Keyed Ignition Switch comes with 2 keys (Part No: 8N3679C) $12.20 [Show Picture] Ignition Tune Up Kit, Basic, 4-Cylinder Gas - For NAA, NAB, Jubilee, 8N w side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964 ). Tune Up Kit, Autolite. Kit contains: D8NN12171AA Point Set, FET12300A Condenser, CONN12200A Rotor & Spark Plugs. (Part No: 309787) $19.92 [Show Picture] Ignition Tune Up Kit, Comprehensive, 4-Cylinder Gas - For 8N (S N 263844 & up), NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 , 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and spark plugs. (For use with original equipment distributors). (Part No: TUNEKIT) $29.99 [Show Picture] Spark Plug - For 2N, 8N, 9N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). SPARK PLUG. Price is for EACH. Minimum Order is 4. (Part No: AL437) $2.92 [Show Picture] Spark Plug Wire Set, Custom, 4 Cyl. - Custom premium quality set fits 4-cylinder gas engines in : NAA, Jubilee, NAB, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). (Part No: CPN12259CUSTOM) $19.40 Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $16.46 [Show Picture] Spark Plug Wire Set, Universal, 4 Cyl. - For NAA, Jubilee, NAB, 9N, 2N, 8N, 2030, 2120, 2130, 2131, 4030, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: CPN12259) $12.58 [Show Picture] Starter - Starter, less drive, special Delco option- DOES NOT LOOK LIKE ORIGINAL. For Jubilee, 2000, 4000, 501, 600, 700, 800, 900, NAA, (Part No: C3NF11002RXLD) $132.90 [Show Picture] Starter - Starter, less drive. For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C3NF11002RXL) $150.75 [Show Picture] Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER) $0.00 Starter - 6 volt, clockwise rotation. For models: (NAA 1952-54 w 134 4 cyl. gas), (501, 601 series 1957-62 w 134 4 cyl. gas), (640, 660, 740 1954-57 w 134 4 cyl. gas), (641, 651, 681 1957-62 w 134 4 cyl. gas), (701 series 1962-68 w 134 4 cyl. gas), (801, 901 series 1962-68 172 4 cyl. gas), (841, 851, 881 1957-62 w 172 4 cyl. gas), (850, 860, 960 1954-57 w 172 4 cyl. gas), (4000LCG, 4030, 4040 1961-64 w 3-201 diesel). Replaces FAC11002, C3NF1100D. (Part No: SFD0047) $96.49 [Show Picture] Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115) $10.22 [Show Picture] Starter Drive - Drive assembly. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee (Part No: C1AF11350A) $42.36 [Show Picture] Starter Relay Assembly - For NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Relay Assembly, 6 Volt, 3 Terminal. (Part No: NCA11450A) $8.85 [Show Picture] Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Part No: SRK403) $13.24 [Show Picture] Starter Solenoid, 12-Volt - Relay Assembly, 12 Volt, 4 Terminal. For most 12 Volt GAS Models 1958-1964 including: Jubilee, 501, 541, 600, 601, 611, 620, 621, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB, 2000, 2030, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140.Replaces 311007FR. (Part No: 311006) $12.72 [Show Picture] Starter Switch - with mounting gasket. Fits: 8N (1948-1952);all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. (Part No: 8N11500WG) $27.92 [Show Picture] Starter w/Drive - 12 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter w Drive replaces D8NN11350CA. (Part No: S.66630) $159.00 [Show Picture] Starter w/Drive - 6 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter w Drive replaces D8NN11350CA. (Part No: S.66619) $159.00 [Show Picture] Terminal Block - For Models: 8N 1950-52, Jubilee, NAA, (2000, 4000 up to 1964), 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 8NNN14448A) $9.75 [Show Picture] Voltage Regulator - Voltage regulator, 12-volt. For NAA, Jubilee. (Part No: 8NE10307) $21.90 [Show Picture] Voltage Regulator, 12 Volt - For Models: (NAA, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee all 1958-1964 with Diesel Engine. (Part No: C0NF10505A) $34.95 [Show Picture] Voltage Regulator, 6 Volt - 6 volt positive ground for 1953-1964 GAS engine tractors: NAA, Jubilee, 1800, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (Part No: FAG10505A) $26.71 [Show Picture] Wiring Harness - Fits NAA & Jubilee (1953 to 1954). Ignition harness only. (Part No: FAF14401B) $20.66 [Show Picture] Wiring Harness, 12 Volt Conversion - For Models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 1953-64. (Part No: NAA10301) $42.20 [Show Picture]   Engine Bearings Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 & 172 4-cylinder GAS or Diesel engines.(.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-010) $32.25 [Show Picture] Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 & 172 4-cylinder GAS or Diesel engines(.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-020) $32.25 [Show Picture] Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 & 172 4-cylinder GAS or Diesel engines.(.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-030) $32.25 [Show Picture] Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-040) $32.25 [Show Picture] Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-STD) $32.25 [Show Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010 - For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (.010 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312103-010) $23.16 [Show Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.020 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312104-020) $23.16 [Show Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-030) $23.16 [Show Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-040) $23.16 [Show Picture] Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD - For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For Models: NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-STD) $23.16 [Show Picture]   Engine Gaskets Crankshaft Seal, Rear - Fits 134 CID, 172 CID gas & 175 CID diesel engines. For Models: 2000 up to 1964, 4000 1962 - 1964, 500, 600 Series, 700 Series, 800 Series 1955 - 1957, 801 Series 1958 - 1962, 900 Series 1955 - 1957, 901 Series 1958 - 1962, NAA, Jubilee. Min order qty is 2. (Part No: C0NN6701A_) $5.30 [Show Picture] Head Gasket 134/172 Gas - Head gasket, non-metallic with 1 2" head bolt holes. For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: E9JL6051AA) $24.40 [Show Picture] Head Gasket, 134 or 172 CID GAS Engines - Head gasket, metal clad with 7\16 head bolt holes. For 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 2000, 4000 with 134 172 gas engines. (Part No: EAE6051DM) $13.10 [Show Picture] Lower Gasket Set - Used on 134 CID & 172 CID gas or diesel engines. For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: CS3477) $44.95 Main Bearing Cap Packing Material, V-Style - For 134 CID Gas in NAA, Jubilee. Price is for each.``**MINIMUM ORDER QTY IS 2. Must be ordered in quantities of 2. (Part No: B3NN6336A) $2.99 [Show Picture] Oil Pan Gasket - Fits 134 gas and 172 gas diesel engines in : NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6710B) $4.51 [Show Picture] Overhaul Gasket Set - Full Overhaul Gasket Set For NAA, Jubilee, 600, 700 - 134" Gas Engine (Head gasket for 7 16 head bolts)(1953-1957) (Part No: CPN6008HM) $38.56 [Show Picture] Overhaul Gasket Set Less Head Gasket 134/172 Gas - For Models: NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Part No: CPN-FPN) $28.74 [Show Picture] Timing Gear Front Cover Gasket - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All gas or diesel 1953 to 1964. (Part No: EAF6020B) $1.86 [Show Picture] Upper Engine Gasket Set - Metal head gasket w 7 16" bolt holes. For tractors: NAA, Jubilee, 600, 700; 134 CID engine (1953-1957). (Part No: VGCPNM) $22.88 [Show Picture]   Engine Overhaul Kits Basic Engine Overhaul Kit, 134 CID Gas, Overbore - Made by TISCO. Super power 3.5” overbore Kit, Kit includes sleeve & piston set, rings, retainers, head gasket. Bearings must be ordered separately. For the following tractors using 134 CID 4 cylinder gas engine (1953-1957): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 2000. (Part No: BEKF110M-LCB) $353.06 [Show Picture] Basic Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3 7 16 kit w metal head gasket. Contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For Models: NAA, Jubilee, 600, 700. (Part No: BEKF114AM-LCB) $270.30 [Show Picture] Engine Overhaul Kit, 134 Gas - Made by TISCO. Overhaul Kit less bearings for 134 gas engine in NAA, Jubilee, 501, 600, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7 16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set) , Gasket Set, Connecting Rod Bushings. Intake & Exhaust Valves (plus guides, locks and springs). Order bearings separately. (Part No: EOK114-LCB) $371.79 [Show Picture] Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3-7 16" standard bore w slotted drive. Complete Overhaul Kit For NAA, Jubilee, Contains complete gasket set, standard camshaft timing gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve & piston kit, oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings are available, must be ordered separately. (Part No: NAAK-LCB) $453.28 In Frame Overhaul Kit, 134 GAS - Made by TISCO. For NAA, Jublee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57. Includes: Super power set 3 1 2" overbore PK110 sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF110M) $321.15 In-Frame Engine Kit, 134 Gas - Made by TISCO. For NAA, Jubilee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57, 3-7 16" standard bore. Includes: CPN6055A sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set w head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF114AM) $224.34 [Show Picture] Overhaul Kit, 134 Gas - Made by TISCO. Complete Overhaul Kit for 134 gas engine in NAA, Jubilee, 501, 600, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7 16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set) , Gasket Set, Connecting Rod Bushings & Bearings. Center, Front & Rear Main Bearings. Intake & Exhaust Valves (plus guides, locks and springs). Available with Std., .001, .002..010, .020 or.030 bearings. (Part No: EOK114) $440.06 [Show Picture] Valve Service Kit - Made by TISCO. For Servicing one engine with valve related parts when only valve refacing is required. Kit contains: Springs, Key and Guides. (Gasket set VGCPNM must be ordered separately) For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964) (Part No: VSKF134G) $38.88 [Show Picture] Valve Train Kit, 134 CID Gas - Made by TISCO. For Servicing one engine when valve replacement is necessary. Kit contains: Valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964) (Part No: VOKF134G) $78.62 [Show Picture]   Engine Parts Camshaft Hydraulic Pump Drive Gear - For Models: 2000, 4000, 600, 700, 800, 900, NAA, Jubilee, all with 134 gas or 172 diesel engines. Camshaft Hydraulic Pump Drive Gear. 5 16 inch tapped hole. Also replaces 500010. (Part No: EAF907B) $46.24 [Show Picture] Camshaft Kit, Refaced Camshaft and Lifters - Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000. Uses a pressed on cam gear. (Part No: 734145) $208.26 [Show Picture] Camshaft, New - New Camshaft with lock ring for cam gear. Bolt on cam gear type only available in Reground Camshaft - Call for availability and price. For NAA, Jubilee, 500 thru 900, 2000, & 4000. 134 & 172 CID Gas Engines (1953-1964). (Part No: C0NN6251A) $133.21 [Show Picture] Camshaft, Reground - Bolt on gear type. For Models: NAA, 600, 700, 800, 900, 2000, 4000 all w 4 cyl. gas engines and casting # C0NN6251. Refundable $30 core charge will be added to your order. (Part No: R1188903) $133.59 Connecting Rod, Reconditioned, w/ Bushing - Must match casting number EAA6205. Fits all gas Tractors with GASOLINE 134 or 172CID Engines. NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 all. Reconditioned Piston Rod with Bushing. (Part No: 1201599) $99.33 [Show Picture] Crankshaft Gear - For models: NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Part No: EAF6306B) $37.05 [Show Picture] Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID & 172 CID engines on: NAA, Jubilee, 600, 620, 630, 640, 641, 650, 660, 601, 611, 621, 631, 641, 651, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: D1NL6303D) $488.38 [Show Picture] Starter Flywheel Ring Gear - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. (Part No: 9N6384) $28.32 [Show Picture] Tappet - For Models: 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Part No: EAA6500D) $11.88 Timing Gear, STD - Standard steel camshaft gear. For 4 cylinder diesel engines on NAA, 2000, 4000, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 801, 900, 901, NAA. (Part No: EAF6256M) $53.76 [Show Picture] Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve Kit) $0.00 Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Price is for Each. Minimum order is 4. (Part No: EAF6505D) $9.95 [Show Picture] Valve, Intake, 172 CID Gas - Intake valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Price is for Each. Minimum order is 4. (Part No: EBU6507A) $6.86 [Show Picture]   Engine Pistons and Sleeves Piston, Standard, 134 CID Gas Engine - Standard 3-ring piston (Rings NOT included) with pin & locks. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108F) $32.92 [Show Picture] Piston,.020 Overbore, 134 CID Gas Engine - Overbore.020 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108H) $39.75 [Show Picture] Piston,.030 Overbore, 134 CID Gas Engine - Overbore.030 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108J) $39.75 [Show Picture] Piston,.040 Overbore, 134 CID Gas Engine - Overbore.040 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108K) $39.75 [Show Picture] Sleeve - Standard sleeve for 134 CID gas engine on: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 2000. (Part No: EAE6055E) $24.38 [Show Picture] Sleeve - Prefinished standard sleeve, hand pressure installed. Used in sleeve & piston kit CPN6055B. For 2000 SERIES, 501, 600, 700, NAA, Jubilee. (Part No: B3NN6055A) $25.12 [Show Picture] Sleeve & Piston Kit - 134 Gas - Super Power Set - For 134 CID Gas engine. 3-1 2" overbore for increased power, authothermic pistons, chrome top rings, chrome steel segment oil rings. For 2000, 501, 600, 601, 700, 701, NAA, Jubilee. (Part No: PK110) $306.24 [Show Picture] Sleeve & Piston Kit, 172 Gas, STD - For (800, 801, 900, 901, 4000, Jubilee, all with 172CID Gas, 4 Cylinder (1955-1964), Standard bore. And for 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains pistons, sleeves, piston pins, retainers & chrome top and chrome steel rail oil control rings. (Part No: PK15G1) $218.06 [Show Picture] Sleeve and Piston Kit - 134 Gas - STD - For NAA, Jubilee, 501, 600, 601, 700, 701, 2000 all with 134 CID Gas, 4 Cylinder 1953-1964, Standard bore. Also for 2000 using 134 CID Gas, 4 Cylinder 1962-1964, that were sleeveless (provided block is bored). Sleeve and Piston Kit contains pistons, sleeves, piston pins & retainers. (Part No: PK14G1) $221.55 [Show Picture]   Engine Rings Piston Ring Set - 3-7 16" bore, 8 compression rings 3 32", 4 oil rings 3 16". For Models: NAA, 501, 541, 600, 601, 700, 701, 2000, NAB. All with 134 CID engine. (Part No: 2C7501) $79.21 Piston Ring Set, 134 Gas, .020 - Overbore 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. .020 oversize set has 2 compression rings at 3 32in. and oil ring at 3 16in. (Part No: CPN6149H) $23.13 Piston Ring Set, 134 Gas, .030 - Overbore 3-ring set cast iron. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. .030 oversize set has 2 compression rings at 3 32in. and oil ring at 3 16in. (Part No: EAE6149B) $23.13 Piston Ring Set, 134 Gas, STD - Standard 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. 2 compression rings at 3 32 and oil ring at 3 16. (Part No: CPN6149B) $26.88 Piston Ring Set, 134 Gas, STD, Chrome Top Ring - Standard 3-ring set with Chrome Top Ring. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7 16 inch bore 134 gas engine. 2 compression rings at 3 32 and oil ring at 3 16. (Part No: EAE6149A) $39.72 [Show Picture] Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32in.), 4. Number and size of oil rings for each piston (Ex: (1) 5 32in.). (Part No: RING SETS) $00.0   Exhaust System Elbow to Exhaust Manifold Gasket - Fits 134 CID gas engines 1953-1964 on Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771 and 172 CID gas engines 1955-57 on Models: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Use with elbow NAA55250B & muffler NAA5230E. **Price per each minimum order qty is 5*** (Part No: NAA55232A) $1 [Show Picture] Exhaust Elbow - Outlet is 1 5 8" O.D. For 2000, 501, 600, 700, 800, 900, NAA, Jubilee, all with 134 or 172 CID engine. (Part No: NAA55250BWG) $19.95 [Show Picture] Exhaust Pipe, Horizontal - Outlet pipe extension, rear straight section. For: NAA, Jubilee, 2000 (1963-1964), 501, 600, 601 (1958-1962 w 134 gas engine), 700, 701 (1958-1962 w 134 gas engine), 800 (1955-1957 w 172 gas engine). Dimensions: Inlet ID = 1-1 2in., Length = 54in., Outlet OD = 1-1 2in. (Part No: NCA5263B*) $14.90 [Show Picture] Exhaust Pipe, Horizontal, 2 Piece - Fits NAA, Jubilee, 1953-1954 with 4 speed trans. Used from muffler to tailpipe, Contains NCA5255B and NCA5263B. (Part No: NAA5255D) $35.15 [Show Picture] Extension Pipe - Vertical two-piece exhaust pipe with clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5 8" I.D., outlet 1-3 4" O.D. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: M105) $23.92 Intake & Exhaust Manifold Gasket - For gas engine Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All from 1953-1964. ***Minimum Order Qty is 5.*** (Part No: C0NN9448C) $1.90 [Show Picture] Manifold, Gas - Intake - Exhaust Manifold For 4 cylinder gas engines in NAA, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accomodate different carburetors. Comes with mounting gasket and 2 elbow gaskets. (Part No: TFM9425WG) $148.65 [Show Picture] Muffler & Pipe Assembly, Vertical - For the following 134ci gas tractors: (NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-64). For the following 172ci gas tractors: (800, 900, ALL1955-57), and the 4-cylinder 4000 series (1958-64). This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5 8" ID, outlet 1-3 4" OD. (Part No: M103) $38.92 [Show Picture] Muffler, Horizontal - For Models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 4-Cyl 2000(1953-1964), 800, 820, 840, 900, 950, 960, (1955-1957), 4-CYL 4000 Series(1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length = 2-1 4in, Inlet tube ID = 1-5 8in, Shell length = 13in, Shell diameter = 3-1 4in, Outlet tube length = 2-1 4in, Outlet tube OD = 1-5 8in., Muffler overall length = 17-1 2in. (Part No: NAA5230E) $29.52 [Show Picture] Vertical Exhaust Pipe(Less Muffler) - For Models NAA, Jubilee501, 600, 700, 4-Cyl 2000(1953-1964), 800, 900(1955-1957), 4-CYL 4000 Series(1958-1964).All with 134 and 172 CID gas engines.Kit includes exhaust pipe with clamp.Does not include muffler. (Part No: NAA55237A) $34.11 [Show Picture] Vertical Muffler & Pipe Assembly - For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11 16 inch inlet and 1 3 4 inch outlet. This is one piece welded construction. (Part No: FD2110) $44.49 [Show Picture] Vertical Muffler & Pipe Assembly - For Models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee all with gas engines. Vertical Muffler & Pipe 2 piece Assembly has 1 3 4 inch inlet and 1 3 4 inch outlet. Comes with clamp to fasten muffler to pipe. (Part No: FD1210) $39.95 [Show Picture]   Fuel System / Air Intake Air Cleaner Cup - For Models: NAA, Jubilee, 600, 700, 800, 900. 4 7 8 inch diameter. (Part No: S.60583) $28.96 Air Cleaner Cup Gasket - Mounting gasket for Air Cleaner Cup S.61648 and S.60583. For models 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: S.61647) $5.68 [Show Picture] Air Cleaner FIller - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2in x 3-1 4in. (Part No: S.43231) $9.99 [Show Picture] Air Funnel - For models NAA, Jubilee600, 700, 800, 900 (2000, 4000 ALL < 1964) (Part No: NAA9684A) $22.84 [Show Picture] Air Hose to Carburetor - For 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3 8 inches long, 1 1 2 inch inside diameter. (Part No: 9N9652) $1.82 [Show Picture] Carb Gasket Set - For all Models 1953-1957, using Marvel Schebler carburetor. (Part No: EAF9502) $6.45 [Show Picture] Carburetor Elbow & Strainer - For Models: 2N, 8N, 9N, NAA, NAB, Jubilee. (Part No: 9N9553) $2.64 [Show Picture] Carburetor Float, Small Bowl - Small bowl carburetor Float for Marvel Schebler carbs used on 9N, 2N and 8N tractors AND used only on the following engines (yr): 134 CID (1953-1954) or 172 CID(1955-1957) gas engines on tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000. (Part No: 9N9550A) $11.06 [Show Picture] Carburetor Kit, Basic - Basic Carburetor kit with Viton Needle and Seat For 2000, 501, 600, 601, 700, 701, NAA, Jubilee. For Marvel-Schebler TSX428, TSX580, EAE9510C, EAE9510D. (Part No: BK47V) $16.60 [Show Picture] Carburetor Kit, Basic - Kit for Zenith 12493 carb used on NAA, Jubilee. (Part No: Z103) $22.00 [Show Picture] Carburetor Kit, Comprehensive - For NAA, Jubilee 1953-64 with 134 CID gas engine, 600 & 700 1955-1957 with 134 CID gas engine, all with a Marvel-Schebler TSX428 or TSX580. Complete Carburetor Rebuild Kit (Part No: C547V) $37.77 [Show Picture] Carburetor Shaft - Throttle shaft and lever. For 600, 700, 800, 900, NAA, Jubilee. (Part No: 312951) $13.28 [Show Picture] Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: NAA, Golden Jubilee replaces TSX428. Center to center on the 2 mounting bolts is 2 1 4 inches. Made in USA, 1 year warranty. (Part No: 13879) $174.90 [Show Picture] Carburetor, Rebuilt - Rebuilt carburetors are sometimes hard to keep in stock. We will try to fill your order whenever possible and as quickly as possible. Please allow up to one week for shipping of a rebuilt carb. If you have a good core, we can rebuild yours. Turn around time is about 1 week and you do not have the core charge. Call us for order information if you would like to send in your core. Rebuild cost does not include float. (Part No: CARBNOTE) $0.0 Carburetor, Rebuilt - Fits NAA, Jubilee - replacement for OEM TSX 428. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1304-CARB) $147.39 Choke Cable - Universal choke cable 72inches long, 7 16 inch thread dia. (Part No: CC72) $9.99 [Show Picture] Choke Fly Assembly - Choke fly assy. 1-5\16 dia. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549) $10.76 [Show Picture] Cyclone Cup and Spring Assy - Only for those tractors (1939-1964)that used the CYCLONE air cleaner assy which MAY include: 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verifiy the type of air cleaner you have before ordering. (Part No: 230053) $14.24 [Show Picture] Cyclone Air Cleaner Glass Jar - For 8N, 2N, 9N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cylone Air Cleaner Glass Jar (Jar Only) Screw on type. Exactly Like Original for tractors that used the 'Cyclone' Air Cleaner only. (Part No: 230056) $21.12 [Show Picture] Fuel Sediment (SHORT) Bowl Assy - Universal assembly complete with fittings. For tractors 9N, 2N, 8N, NAA, Jubilee. Replaces 2N99155B & NAA9155B w short bowl. (Part No: 2NAA9155B) $20.16 [Show Picture] Fuel Sediment Glass Bowl With Gasket - 2 in. Glass Bowl W gasket fits NAA9155B and 2N9155B sediment bowls. Includes gasket. Fits 2N, 9N, 8N, NAA, Jubilee. (Part No: 9N9162) $6.48 [Show Picture] Fuel Tank - For Gasoline engines (not for Diesel)11 gallon, No opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. (fuel line must be modified) fits: NAA, Jubilee 1953-54; 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NAA600800G) $193.08 [Show Picture] Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $33.66 [Show Picture] Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $59.99 [Show Picture] Needle Valve - Viton float valve needle, seat & gasket assembly. Tractors: 9N, 2N, 8N, (1939 to 1952. (501, 601, 701, 600, 700, NAA, Jubilee 4-cyl 134 CID gas engines 1953 to 1957), (2000 1962-1964). (Part No: C3NN9564A) $5.94 [Show Picture] Needle Valve - Viton float valve needle, seat & gasket assembly. For Models: (501, 601, 701, 600, 700, NAA, Jubilee, 2000, 800, 900, 801, 901, 4000 all with 134 or 172 CID gas engines from 1958-1964). (Part No: C3NN9D532A) $5.94 [Show Picture] Screen - Air cleaner funnel screen. For tractors: NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964)TIS (Part No: NAA9669A) $9.54 [Show Picture]   Gauges Ammeter - For all models to 1958. Terminal type Ammeter. 30 - 30. Chrome Ring. Replaces FAD10850A. (Part No: A0NN10670A) $9.28 [Show Picture] Hourmeter, Analog - 2", black, 12-24 volt. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $43.74 [Show Picture] Instrument Panel Light Assembly - 6 Volt Light Assembly for 8N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 8NN14662A) $22.95 [Show Picture] Instrument and Gauge Kit - For NAA, Jubilee, 600, 700 with 4 Speed Transmission, 800, 900 - ALL 1953-57. Instrument and Gauge Kit contains: Proofmeter, Oil Gauge - 80 lb., Ammeter - 30 Amp, Temperature Gauge and Instrument Lamp Assembly - 6V. (Part No: FDGAUGEKIT_SP) $86.66 [Show Picture] Oil Pressure Gauge - For 2N, 8N, 9N, 600, 700, 800, 2000, 4000, NAA, Jubilee. all before 1964. Oil Pressure Gauge, 40 lbs., 2" Body Diameter. (Part No: S.61171) $16.70 [Show Picture] Oil Pressure Gauge Kit, Universal - Complete assembly w oil tube and mounting hardware, Lighted. 80 psi. (Part No: SSW0002) $10.95 [Show Picture] PROOF METER CABLE (STEEL) - Ford Steel Jacketed Proof Meter Tach Cable 30 1 2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365B_STEE) $19.90 Tachometer (Proofmeter) - For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 - all with 4-cylinder engines and 4-speed transmissions (1953-1964) (Part No: C3NN17360N) $29.70 [Show Picture] Tachometer Cable - Ford Proof Meter Tach Cable 30 1 2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365B) $15.52 [Show Picture] Temperature Gauge - Chrome Rim - For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2 inch Face Diameter, 34 inch Capillary Tube Length. Replaces FAD10883A, and C3NN18287A. Longer Capillary Tube available upon request. (Part No: C3NN18287A-Chro) $18.26 [Show Picture] Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2" Diameter, 34" Capillary Tube Length. Replaces FAD10883A. (Part No: C3NN18287A-Blac) $18.26 [Show Picture] Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8V to 16V range, lighted dial, fits 2" diameter hole. For tractors that use 12V electrical system. Chrome bezel with black background, white letters and white pointer. (Part No: VOLT12LT) $12.37 [Show Picture]   Hitch / Drawbar Chain - CHAIN, Fixed drawbar safety chain assy, EXACT OF ORIGINAL. FOR tractors: 9N, 2N, 8N, Jubilee, NAA (1939-1954). (Part No: 9N5370) $63.99 [Show Picture] Crank Arm, Leveling Box - For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4000, 4110, 420, 4600, 600, 700, 800, 8N, 900, 9N, NAA. (Part No: C5NN594E) $12.69 [Show Picture] Drawbar Check Chain Kit - Consists of 1 pair anchors, 2 eyelets, 2 chains, 4 clevises with pins and hardware for the following tractors: 9N, 2N, 8N (1939-52), NAA (1953-54), Jubilee, 600, 700, 800, 900 Series (1955-57), Dexta, Super Dexta (1958-64), 2000, 4000 (1962-64), 2000, 3000, 4000 (1965-75), 2600, 3600, 4600 (1975-81), 2610, 3610, 4610 (1981-1990). (Part No: DCK1) $27.06 [Show Picture] Drawbar Link Check Chain Anchor - Anchor, Drawbar link check chain (pair). For 2000, 2600, 2610, 2N, 3000, 3600, 3610, 4000, 4600, 4610, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, SUPER DEXTA, Jubilee. (Part No: 957E5967) $22.06 [Show Picture] Drawbar Lock - For CAT I drawbars only ( drawbars that are 1in. thick x 2-1 2in. width) . Prevents drawbar from rotating. (Part No: 49A29) $26.72 [Show Picture] Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1 2" L Hole Center To Hole Center, 2 1 2" Wide, 1 1 8" Thick (drawbar fits lift between lift arms). (Part No: 9N5182) $56.23 [Show Picture] Drawbar, Standard, Red - Drawbar is 1" x 2-1 2" x 26", with 7 8" pins, (Category I). (Part No: 9N5182A) $29.90 [Show Picture] Eyelet Assy, Check Chain - Fits 9N, 8N, NAA, Jubilee, 900, (2000 4-cyl RowCrop 1 1953 & newer), (4000 RowCrop 1 1953 & newer). (Part No: EC0N660A) $7.65 [Show Picture] Leveling Box Assembly - Left - Left Hand Rod and fork assembly, hydraulic lift, left hand. For 9N, 2N, 8N, NAA, Jubilee, tractors. 1939 - 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 8N564B) $47.99 [Show Picture] Leveling Box Assembly - Right - Right Hand Leveling Box Assembly with fork. Adjusts 20.25 to 25.25 inches. For 2N, 8N, 9N, NAA, Jubilee, all 1939-1964. (Part No: 8N577A_) $57.73 [Show Picture] Leveling Box Yoke Rod, LH - Left Hand side. Rod dia is .750". For Models: 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4110, 420, 600, 620, 30, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 8N, 9N, NAA, Jubilee. (Part No: C5NNB863A) $35.90 [Show Picture] Lift Arm - 31 3 4 Ball Centers For 8N, 2N, 9N, NAA, Jubilee. (Part No: 9N555B) $47.67 [Show Picture] Link End - Plated, forged, 1-1 4" thread, left hand, 1" hole. (Part No: RE1717L) $29.96 [Show Picture] Link End - Plated, forged, 1-1 4" thread, right hand, 1" hole. (Part No: RE1718R) $29.96 [Show Picture] Lower Link Support Pin - Lower link support pin. For 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA, Jubilee. (Part No: NCA563C) $19.90 [Show Picture] Pin, Hydraulic Lift Yoke - For Models: 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B) $12.52 [Show Picture] Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. (Part No: HF141101) $255.69 Shaft Level Box - Shaft and gear, length 14; thread length 4. For 2000, 2N, 4000, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: NCA579B) $19.86 [Show Picture] Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 9N, 2N, 8N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets w pins & hardware. 31.5 inches center to center. ** $15 ADDED TO SHIPPING DUE TO WEIGHT ** (Part No: 231253XHD) $60.02 Stay Strap, Lower Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5375) $9.98 [Show Picture] Stay Strap, Upper Red - For 8N, 2N, 9N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5374) $9.98 [Show Picture] Swinging Drawbar - Drawbar is replacement drawbar for the swinging drawbar kit. For 600, 800, 8N, NAA, Jubilee. (Part No: C0NN805F) $38.31 [Show Picture] Swinging Drawbar - For 600, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Used in 49A34R & 49A35. (Part No: 49B70R) $41.18 [Show Picture] Swinging Drawbar Kit - For NAA, 600, 8N. Swinging Drawbar Kit. Painted Red. Contains Drawbar: 29.375" long, 2.00" wide, 1.00" thick, Rear Drawbar Hanger, Drawbar Clevis Assembly and Drawbar Clevis Pin. ADDITIONAL $10 SHIPPING FEE DUE TO WEIGHT. (Part No: 49A34R) $99.48 [Show Picture] Thrust Bearing - Bearing assembly. For 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, DEXTA, JUBILEE, NAA, SUPER DEXTA (Part No: 9N554) $8.80 [Show Picture] Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 16 to 24 inches overall. Dichromate plated. (Part No: JSA1012C) $23.90 [Show Picture] Top Link Rocker - For 9N, 2N, 8N, NAA, Jubilee, 600, 800 Hi Clearance, 601, 801, 2000 4 cyl Hi-Clearance, 4000 4 cyl Hi-Clearanc. (Part No: NCA535A) $59.90 [Show Picture]   Hydraulic System Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1 8 inch DIA, with four 1 4 inch holes and 1-15 16 inch spacing.The drive flange is 3 4 round bore with set screw 1 4 by 3 8. (Part No: L601-14) $42.27 [Show Picture] Cylinder Seal Kit, For 2 in. cylinders - For side and top link cylinders. Seal Repair Kit for 2in. cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: HSK2002) $16.96 [Show Picture] Cylinder Seal Kit, For 3 inch Cylinders - For side and top link cylinders. Seal Repair Kit for 3in. cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Part No: HSK3002) $17.91 [Show Picture] Cylinder, Side Link - Hydraulic side link cylinder, 2" bore. (Part No: HSL2201) $207.17 [Show Picture] Draft Control Plunger - Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta (Part No: 8N541B) $32.20 [Show Picture] Draft Control Plunger Spring - Fits between Hydraulic plunger & yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 9N547B) $27.72 [Show Picture] Felt, Spring Seat - Hydraulic lift draft control spring seat. For Models: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529) $3.14 [Show Picture] Friction Disk - Hydraulic Control Lever. 3" dia. 1 2" hole. For Models: 2N, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, (2000 & 4000 4 cyl.). Sold in package of 5. Price is for each. (Part No: C5NN518B) $.99 [Show Picture] Hydraulic Lift Cover Repair Kit - For NAA 1953-64, Jubilee. Lift Cover Repair Gasket Kit. (Part No: LCRK5354) $7.98 [Show Picture] Hydraulic Lift Piston - Single groove piston 2-1 2" dia., groove is centered 1 1 4 inch from bottom of piston. O-Ring available as NAA533A and Back Up Washer as NAA473A. For Models: NAA, NAB, 2N, 8N, 9N. (Part No: NAA530B) $25.70 [Show Picture] Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900. Replaces NCA526A and 957E526. (Part No: 86563314) $35.53 [Show Picture] Hydraulic Lift Ram Arm - For NAA, Jubilee. (Part No: NAA545A) $106.08 Hydraulic Lift Shaft Arm - For 2N, 8N, 9N, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 gas. (Part No: 9N543B) $86.34 [Show Picture] Hydraulic Lift lever Assembly - For 9N, 2N, 8N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift Control Lever with Ball End 2N512, Lift Control Plate (Cast Aluminum as original) 2N-516A2 and Friction Disc C5NN518B. (Part No: 2N512**) $34.29 [Show Picture] Hydraulic Pump Control Valve - Hydraulic Pump Control Valve Assy. For NAA, Jubilee. (Part No: NAA638E) $42.52 [Show Picture] Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3 4" diameter, 9-1 4" overall length. End A type: key, 3 4" size , End B type: 6 spline, 3 4" size. Associated components end A flex. cplr: L601-14 (3 4" bore drive flanges both sides), end B hub: 1". Fits: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 194355) $25.90 [Show Picture] Hydraulic Pump Gear Housing - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA905C) $138.60 [Show Picture] Hydraulic Pump Hub - Hydraulic Pump Hub for Sherman 54 Series Loader. Hydraulic Pump Hub 3 7\8 OD, 2 3\4 Center to center on holes. 6 spline center bore, 3\4 ID. (Part No: 54C2055) $31.72 [Show Picture] Hydraulic Pump Repair Kit - Hydraulic Piston Type Pump Repair Kit. Services 1953-1964 four cylinder gas and diesel tractors. For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: CCPN600AB) $34.95 [Show Picture] Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies (Part No: NCA966E) $44.10 [Show Picture] Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For Models: NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1201A) $5.70 [Show Picture] Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For Models: NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1202A) $3.91 [Show Picture] Hydraulic Spring Seat - For Models: 9N, 2N, 8N, NAA, 600, 900 (1948-1954). (Part No: 9N525B) $10.56 [Show Picture] Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030) $387.96 [Show Picture] Moreflex Drive Kit - Morflex Series 352 coupler complete with 2 drive flanges, set screws, 4 bolts & lock nuts. Mounting is four 5 16in. holes spaced 2-1 4in apart. (Part No: L601-9) $52.47 [Show Picture] Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7\8 dia. shaft. 5\16 dia. bolt holes 2-1\4 on center. For 352 (Part No: L78-13) $13.74 [Show Picture] Seat, Hydraulic Lift Draft Control Spring - Exact of original. Fits all models (1939-1964). (Part No: 2N624) $9.38 [Show Picture] Swivel - Draft Control - Fits NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta (Part No: 957E692) $19.92 [Show Picture] Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9 16-18 O-ring boss with two adapters 9 16-18 ORBM x 1 4 NPTM 90 degree swivel. 3 cylinder bore, 8 stroke length, 26 closed length, 12-7 16 barrel length, 1 rod end diameter, 1-3 4 rod end width, 1 diameter base end. (Part No: HTL3103) $250.93 [Show Picture] Wobble Shaft Plate - For Models: 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Part No: NCA859A) $90.77 [Show Picture]   Lights HEADLIGHT SET - 12 VOLT - For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. EXACTLY like original with TRACT-O-LITE stamped into housing. (Part No: 2N13005-12V) $134.35 [Show Picture] HEADLIGHT SET - 6V - EXACTLY like original with TRACT-O-LITE stamped into housing for models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For Models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 9N, 2N, 8N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. (Part No: 2N13005-6V) $142.07 [Show Picture] Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, gray - Sealed beam headlamp assembly in heavy gauge steel housing with soft vinyl bezel. Does not look like original. (Part No: L525HG-12V) $29.00 [Show Picture] Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with soft vinyl bezel. Does not look like original. (Part No: L525HB-12V) $29.00 [Show Picture] Headlamp Assembly, 12 Volt, Blue - (Single) 12-volt, metal body & bezel, blue enamel finish, 5-3 4" diameter for the following tractors: NAA, Jubilee, 501, 600, 601, 701, 801, 901 (1958-1962), 2000, 3000, 4000, 5000, 7000 (1965-75). Does not match original. (Part No: 310068) $35.58 [Show Picture] Headlamp Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body & bezel, grey enamel finish, for NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Part No: 310066F) $34.95 [Show Picture] Headlight Bracket - ROUND right or left side. For tractors: 8N, NAA, Jubilee {1949-1954}. (Part No: 8N13472) $11.60 [Show Picture] Knob, Light Switch - Aluminum. For Models: 9N, 2N, 8N, NAA, Jubilee. (Part No: 9N9703) $6.82 [Show Picture] Light Switch w/ Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $24.50 [Show Picture] Sealed Beam Bulb - 12 Volt, 3 Lug Terminal Type. 4-1 2" dia. bulb. (Part No: D6NN13N007A) $16.95 [Show Picture] Switch, Light - For 9N, 2N, 8N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B) $9.26 [Show Picture] Tail Light Assembly, 6 Volt - Light assembly has FOMOCO lens (plastic). For 6 volt tractors made between 1953 to 1954 including NAA & Jubilee , also fits the following models: (Caution; may not fit later models of these tractors): 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: FAA13402A) $32.90 [Show Picture] Tail Light Lens - Plastic 4 in. lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3in. apart). Fits tractors 1953 & newer. (Part No: FDV13450A) $11.26 [Show Picture] Tail Light Wire Clip - For 2N, 8N, 9N, NAA and Jubilee to 1954. Rear Lamp Wire Clip - 6 required per tractor. (Part No: 9N17668) $2.50 [Show Picture] Worklight Kit, 6 Volt - Kit includes, 6" steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount(socket), and switch. Assembly required. For Models: 2N, 9N, 8N, NAA, 600, 800. (Part No: S.43377) $62.70   Miscellaneous CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof xtension Cables. (Part No: CC7M1C) $335.61 [Show Picture] Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately. (Part No: B257X) $402.16 [Show Picture] Canopy Mounting Kit, 2 Post - Mounts the canopy to all our 2 post ROP frames except EMF1 (Hoop Type Frame). (Part No: B6603) $51.48 [Show Picture] Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $38.28 Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $77.88 Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. (Part No: B257XSTD) $292.51 [Show Picture] Deluxe Canopy, 3 Bow - Red. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $153.92 [Show Picture] Deluxe Canopy, 3 Bow - Yellow. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100Y) $153.92 [Show Picture] Deluxe Canopy, 3 Bow - Blue. Regal Steelcraft 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100B) $153.92 [Show Picture] Deluxe Canopy, 5 Bow - Red. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504R) $199.90 [Show Picture] Deluxe Canopy, 5 Bow - Yellow. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504Y) $199.90 [Show Picture] Deluxe Canopy, 5 Bow - Blue. Regal Steelcraft 5-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, including those with square fenders. 48 inch spread from bracket to bracket. (Part No: RFC504B) $199.90 [Show Picture] Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $106.60 [Show Picture] Grease Gun - 3-way fill cartridge gun. (Part No: C3NN17125A) $19.90 [Show Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, (2000, 4000 thru 1964). (Part No: 1212422) $299.95 [Show Picture] Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For Models: (NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840 w loader, backhoe). (Part No: 1411235) $299.95 [Show Picture] ROP Frame Assembly - Cross Bar type Roll-Over Protection frame. Fits 9N, 2N, 8N, DEXTA, NAA, Jubilee, 501, 600, 601, 700, 701, 2000, 2100, 3000. ** ITEM IS TRUCK SHIPPED (100 lbs)- $85 IS ADDED TO SHIPPING **. (Part No: MF1) $534.46 [Show Picture]   Oil System Oil Filler Cap with Element - For Models: 8N, 2N, 9N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, ``801, 811, 821, 841, 851, 861, 871, 881, ``900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Also replaces OEM 8N6766B. (Part No: 310030) $9.95 [Show Picture] Oil Filter - Cartridge Type For models NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 thru 1965. Comes with gasket. Measures 4 3 4 inches long, 4 inch diameter with holes in each end of 3 4 inch. (Part No: CPN6731B) $7.83 [Show Picture] Oil Filter - Spin-On Type For models NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 3000, 4000, 5000, 2600, 3600, 4600, 5600, 6600, 2610, 3610, 4610, 5610, 6610. Also replaces, 86546614 and D9NN6714EA.(S40538) (Part No: E7NN6714AA) $7.82 [Show Picture] Oil Filter Mounting Gasket - This gasket fits behind the mounting plate that the filter screws on to. For spin on type oil filters only. For Models: 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A) $1.99 [Show Picture] Oil Filters, Tri Pack - Three pack of cartridge Type oil filters. For Models: NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 thru 1965. Measures 4 3 4 inches long, 4 inch diameter with holes in each end of 3 4 inch. Comes with gasket. (Part No: CPN6731BTRIPACK) $19.20 [Show Picture] Oil Pan Plug Kit - Gasket, oil pan plug & screen assembly. For all gas models 1939-1964. Fits 9N, 2N, 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 (Part No: 9N6730WG) $12.83 [Show Picture] Oil Pump Kit - Kit, oil pump shaft & rotor. For 4-cylinder GAS engine on: 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, NAA, Jubilee. All with either 134 or 172 CID engines. (Part No: C3AE6608B) $33.88 [Show Picture] Oil Pump Repair Kit - Oil pump repair kit for gear type pump. For Models: NAA, Jubilee with 134 CID engine. (Part No: CPN6600A) $28.96 [Show Picture] Oil Pump, Slotted Drive - Slotted Drive type for 134 CID gas engine in: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 2000 (<1964). (Part No: EAF6621D) $56.18 [Show Picture]   PTO Bearing, PTO Shaft - Front PTO shaft bearing, 1.81" ID. For 2N, 8N, 9N, NAA (1953-54), Jubiilee, NAB.Replaces 9N715C. (Part No: 9N715BC) $9.74 [Show Picture] PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. (Part No: MISC) $0.00 PTO CAP - For Models: 9N, 8N, 2N, NAA, JUBILEE, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 310088) $10.38 [Show Picture] PTO Overide Clutch - Overide Coupler For 1 3 8" Female To 1 3 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. (Part No: C660F) $43.69 [Show Picture] PTO Overide Clutch - Overide Coupler For converting 1 1 8" Male To 1 3 8" Male, (Has 1 1 8" female at one end and 1 3 8" Male at the other)6-Spline Free-wheels smoothly when implement exceeds PTO speed. (Part No: C670F) $43.69 [Show Picture] PTO Overide Clutch - Overide Coupler For 1 3 8" Female To 1 1 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. (Part No: C680F) $77.00 [Show Picture] PTO Overide Clutch - Overide Coupler For 1 1 8" Female To 1 1 8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. (Part No: C690F) $67.39 [Show Picture] PTO Shaft - PTO Conversion Assembly For NAA, Jubilee, (converts 1 1 8" shaft to 1 3 8"). Complete assembly includes: Shaft housing, cover, retaining collar seal, collar with tapered pin, 2 snap rings, front bearing, shaft seal sleeve, seal, and shaft. Assembly ready to bolt on. Length 30 3 16". (Part No: NAA700-38) $105.91 [Show Picture] PTO Shaft Housing - For 8N, 9N, 2N, (NAA 1953-54), Jubilee, NAB. (Part No: 9N733B) $21.11 [Show Picture] PTO Shaft Seal - O.D 2.45", I.D 1-5 8", 5 8" wide. For tractors with 1-1 8" to 1-3 8" PTO including 4, 6, 7, 8 speed transmissions, models: 9N, 2N, 8N, NAA, Jubilee, 2000, 3000, 3550, 4000, (1965-1975), 2600, 3600, 4100, 4600, (1975-1981), 2610, 3610, 4110, 4610, (1981-up). Replaces 9N703B, D8NN703AA, D9NN703BA. (Part No: D9NN703BB) $6.95 [Show Picture] PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1 8" or 1-3 8" PTO shaft. (Part No: 9N703B) $7.34 [Show Picture] PTO Shaft Sleeve Bushing - For 1-1 8in. PTO shafts (NOT 1-3 8in.)1.185" I.D, 1.620" O.D, 1" thick. For Models: 9N, NAA (1953-54), 2N, 8N, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 9N735B) $6.28 [Show Picture]   Paint Paint, Light Gray, Aerosol, 6 Cans - Shipped in pkg of 6 cans. Price shown is per can. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330SP) $5.19 Paint, Medium Grey, 1 Gallon - Medium Grey. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240GAL) $39.97 Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $39.97 Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $18.73 Paint, Aluminum, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $8.02 Paint, Brownish Medium Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245GAL) $47.46 Paint, Brownish Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245QT) $21.36 Paint, Brownish Medium Gray, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245SP) $7.86 Paint, Dark Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords ('39-'47). (Part No: TP2888GAL) $38.05 Paint, Dark Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords ('39-'47). (Part No: TP2888QT) $19.22 Paint, Dark Gray, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords ('39-'47). (Part No: TP2888SP) $7.86 Paint, Empire Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For Models 1963 and up. (Part No: TP360GAL) $39.97 Paint, Empire Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360QT) $18.73 Paint, Empire Blue, Aerosol, 6 Cans - Shipped in pkg of 6 cans, Price shown is per can. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360SP) $5.19 Paint, Ford White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470GAL) $52.54 Paint, Ford White, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470SP) $7.86 Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $39.97 Paint, Gloss Black, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $5.19 Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760LF-GAL) $67.90 Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760LF-QT) $23.64 Paint, Light Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330GAL) $39.97 Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330QT) $18.73 Paint, Medium Gray, Aerosol, 6 Cans - Price is for 1 can. Minimum order is 6 cans. Must be ordered in quantities of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability, heat resistant. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240SP) $5.19 Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $39.97 Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $18.73 Paint, Satin Black, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $5.19 Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $39.97 Paint, Soft Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200QT) $18.73 Paint, Soft Black, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $5.19 Paint, Vermillion Red, 1 Gallon - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822GAL) $39.97 Paint, Vermillion Red, 1 Quart - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822QT) $18.73 Paint, Vermillion Red, Aerosol, 6 Cans - For models (1948-1957). Vermillion Red, sold in packages of six. Price shown is per can. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822SP) $5.19 Paint, Vibrant Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365GAL) $58.12 Paint, Vibrant Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365QT) $25.10 Paint, Vibrant Blue, Aerosol, 6 Cans - Spray paint shipped in pkg of 6 cans. Price shown is per can. Must be ordered in multiples of 6. From TISCO, providing OEM quality. High Strength air dry enamel with Alklyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365SP) $7.86   Seats Flip-Over Seat Spring, Hinge & Bolt Assembly - For flip-over seats on 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4-cylinder gas. Seat not included. Equivalent to NCA404B and NCA436A. (Part No: R0642R0643) $49.00 [Show Picture] Pan Seat - Fixed seat For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 2000, 4000, all with 4 cylinder engine. This is not a flip-over seat. (Part No: 8n400) $42.13 [Show Picture] Pan Seat - Flip-over style. Replaces OEM# C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 800, 2000, 4000, 2N, 8N, 9N(4-cylinder). (Part No: C5NN400AE) $38.76 [Show Picture] Pan Seat, Universal - Gold zinc plated, 3-1 2" center to center on mounting holes, 1 2" by 1 2" center square. (Part No: B1865) $36.96 [Show Picture] Rubber Bumper - Drivers seat to spring. For Models: 8N, NAA, NAB. All 1948-1954. (Part No: 8N434B) $4.72 [Show Picture] Seat Belt, Adjustable - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $35.90 [Show Picture] Seat Cushion (Blue and White) - For all ford tractors with steel pan seat.This seat cushion is blue and white with a FORD script logo. Same as 9N401B except back edge is White with Blue FORD Letters. (Part No: R4120) $27.95 [Show Picture] Seat Cushion (Red and White) - Seat Cushion - Deluxe with 2in. of foam padding. For all ford tractors with steel pan seat. This seat cushion is Red and white with a FORD script logo. Same as 9N401B except back edge is White with Red FORD Letters. (Part No: R4118) $27.95 [Show Picture] Seat Cushion (Red) - For all ford tractors with steel pan seat.This seat cushion is red with a FORD script logo. (Part No: 8N401R) $33.75 [Show Picture] Seat Cushion(Blue) - For all ford tractors with steel pan seat.This seat cushion is blue with a FORD script logo. (Part No: 9N401B) $37.80 [Show Picture] Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 800, 900, 2000, 4000 with 4 Cylinder Engine. 2 3 8 inches wide. May require modification of bolt holes for an original hinge. (Part No: R0642) $38.22 [Show Picture] Seat, Universal - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $139.90 [Show Picture] Tie-On Seat Cover - Blue & White, 19" wide. Deluxe with 2 inches of foam. (Part No: R1013) $37.79 [Show Picture]   Sheet Metal / Body Parts Battery Box - For NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 - 1953 to 1964. Replaces NCA 10432A. Comes Primed. Use with (SOLD SEPERATELY) battery hold down NCA10718A and hold down Bolts 8N10728WN & NCA10728WN. Note additional parts numbers in "comments" section of order form if required. (Part No: C0NN10732T) $42.90 [Show Picture] Battery Cover, Restoration Quality - Battery cover with access door, also with round cable opening. Exact of original (powder coated red). Fits: NAA, Jubilee (Part No: NAA5162) $46.46 [Show Picture] Bumper - For NAA, Jubilee, 600 & 800 Series (thru 1964), 2000 & 3000 (1965 & up), 2600, 3600, 4600 (1975 & up), 9N, 2N, 8N - has 3 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Painted red, axle mount with mounting brackets. This is an aftermarket item. Add an additional $20.00 for shipping due to weight. (Part No: BU1021) $179.90 [Show Picture] Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $22.95 [Show Picture] Fender - Fender with Bracket For NAA, Jubilee - Fits RH & LH. Add $10.00 per fender in addition to regular shipping charges. (Part No: CONN1623A) $91.08 [Show Picture] Fender - Fender panel (no longer supplied by OEM). Panel comes primed. To install, remove fasteners from old panel, drill new holes and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 9N, 2N, 8N (1939 to 1952) and row crop high clearance models 700 and 900 (1957-1962), fits right side or left side. Add $10.00 per fender in addition to regular shipping charges. (Part No: FF101) $77.21 [Show Picture] Fender - Fender Skin, Bracket not included- Fits RH or LH. For Models: 2000, 2600, 2610, 3000, 340A, 3600, 3610, 4000SU, 420, 445A, 4500, 4600SU, 535, 540A, 540B, 545, 600, 800, Jubilee, NAA. Add $10.00 per fender in addition to regular shipping charges. (Part No: E1NN16315DA) $72.84 [Show Picture] Fender Bolt Kit 4 Per PKG - Bolt kit, rear fender bracket to axle housing, bolt, nut & washer kit {set of 4}. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900. (Part No: 355310-KIT) $31.04 [Show Picture] Fender With FORD Script - Fender panel, steel. Has raised 'FORD' script. Panel comes primed. To install, remove fasteners from old panel and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 9N, 2N, 8N, 700, 900, NAA, JUBILEE(1939 to 1954), fits right side or left side. Due to weight $20.00 will be added (per fender)to regular shipping charges. (Part No: FF101S) $169.99 [Show Picture] Front Grill - Fiberglass. For Models: NAA, 600, 800. (Part No: 713477) $146.81 [Show Picture] Grill- Restoration Quality - NAA, Jubilee, 600, 800. Metal. (Part No: NCA8200A) $234.23 Hood Emblem Housing - Fits NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901. Housing holds emblem and connects side pieces of hood. (Part No: 311319) $105.53 [Show Picture] Running Board Bracket - Front - For 8N, NAA, 600, 700, 800, 900, 601, 801, 2000, 4000, all WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket Right OR Left side. Price is EACH bracket. EXACTLY LIKE ORIGINAL. (Part No: 8N16470) $18.48 [Show Picture] Side Panel - LH - Front left hand lower side panel assembly for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). (Part No: C3NN16653B) $92.33 [Show Picture] Side Panel - RH - Front right hand lower side panel assembly for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964) (Part No: C3NN16652B) $94.91 [Show Picture] Tool Box - Universal Tool Box 15 1 2" X 4 3 4" X 4 1 4". Painted Red. (Part No: R2685) $25.45 [Show Picture] Tool Box - Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5 8" wide and 4-1 2" deep. (Part No: TB100FM) $33.88 [Show Picture]   Steering Bearing - Steering Shaft Gear Thrust - For models up to 1964 including: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3571-OE) $13.18 [Show Picture] Bearing Cup - Steering Shaft Gear Thrust - For models up to 1964 including: 8N late, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3552) $10.30 [Show Picture] Bearing Retainer - Steering Shaft Gear Thrust - For Models: 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12 1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. Sold in quantities of 2 price is for 1. (Part No: 8N33581) $2.95 [Show Picture] Bearing and Cup Assembly - 1-3 4" OD. For Models: 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for One (1) assembly - Two (2) assemblies required per steering shaft top and bottom.Replaces 8N3571 and 8N3552. (Part No: 8N3505) $26.34 [Show Picture] Bolt, Radius Rod to Front Axle - MINIMUM ORDER IS 2 (order in multiples of 2). Length is 5-1 2in. 5 8 -18 thread. Head OD is 7 8in. Fits the following tractors: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, ``2000 (up to 1964), 4000 (up to 1964). Price shown is for 1 bolt. (Part No: NAA3415B) $6.99 [Show Picture] DRAG LINK -TIE ROD BOOT ASSORTMENT - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13 16" x 5 8" x 5 8", 1 15 16" x 3 4", 3 4", and 1 3 8" x 1" x 1 2". (Part No: TIERODBOOTS) $15.30 [Show Picture] Drag Link End, Rear - RH Threads. Fits 2N, 8N, 9N, 2000 4Cyl 1962-64, 2031, 2120 1963-64, 2131, 4000 1962-63, 4031, 4120, 4131, 600, 601, 611, 620, 630, 631, 640, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 850, 860, 861, 871, 881, NAA, NAB. (Part No: NAA33271A) $13.95 [Show Picture] Drag Link End, Front - A+ 3.875", B= .687", 18 Left Hand Thread, Manual Steering. For models 2N, 9N, 8N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1 62 to 12 64), 4000(1 62 to 12 64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1 16 of an inch longer. (Part No: NAA3270A) $10.95 [Show Picture] Front Axle Assy W/ Bushing - For models 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000(W Manual 7-57 PS 55), 4000(W Manual 7-57 PS 55). This axle is for models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. (Part No: D9NN3010EA) $167.00 [Show Picture] Front Axle Support Bushing - For 2N, 2000, 4000, 8N, 9N, 600, 700, 800, 900, NAA, Jubilee. Front axle bushing 1939-1964 with standard front axle. (Part No: 2N3039) $4.95 [Show Picture] Pin Front Axle - Pin, front axle unthreaded. OD 1.743", ID 1.310", L 4". For NAA, Jubilee. (Part No: NAA3126B) $31.98 [Show Picture] Pitman Arm (LH/RH) - Steering Gear Pitman Arm for models 8N (SN 216989 and up 1949-1952), NAA, 600, 700, 800, 900, 2000, 4000. Replaces NCA3590A. (Part No: 86542743) $85.27 [Show Picture] Power Steering Conversion Kit - For Ford 4 cylinder gasoline only: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 2000, 4000. Cannot be used with Front End Loaders. Not for RowCrop models. Kit includes all parts necessary for conversion (items shown in picture) including power steering pump, belt & pulley, hydraulic control arm etc. Made in U.S.A. (Part No: S.61100) $1198.80 [Show Picture] Seal, Steering Gear, Sector Shaft - For Models: 8N s n above 2616989 1948-1952, (NAA, Jubilee 600, 620, 630, 640, 650, 660, 800, 820, 840, 860, 2000, 4000, all 1953 -1964). (Part No: D5UZ3591B) $8.52 [Show Picture] Spindle / King Pin Repair Kit - For 8N, 2N, 9N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: Upper Spindle Seal C5NN3125A, Spindle Top Bushing 2N3109, Spindle Bottom Bushing 2N3109, and Thrust Bearing C0NN3123B. (Part No: S.65986) $22.50 [Show Picture] Spindle Nut - Fits on front spindles. Castle Nut 3 4in. x 16UNF. Fits: 9N, 2N, 8N, Dexta, Super Dexta, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: 387930S36) $1.14 [Show Picture] Spindle Thrust Bearing - Thrust bearing for: 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, DEXTA, NAA, Jubilee, SUPER DEXTA (Part No: C0NN3123B) $9.94 [Show Picture] Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3 4 inches with notch on outside and 1 4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3105B) $64.33 [Show Picture] Spindle, Front - Left Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3 4 inches with notch on outside and 1 4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3106B) $64.33 [Show Picture] Steering Arm - For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 957E3130. (Part No: 310799) $45.95 [Show Picture] Steering Column Shim Kit - 2"x .005", 2"x .010", 2"x .020". For Models: 8N w 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. (Part No: S.61623) $19.96 [Show Picture] Steering Gear Assembly - Complete manual steering gear assembly fits: NAA, Jubilee. (Part No: S.67078) $521.40 [Show Picture] Steering Sector - Left Hand - Left Hand steering sector shaft (single gear) 5 tooth, For 8N (late), NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 tooth, you can use this part for the early 8N but you must replace right and left. (Part No: 251293) $141.17 [Show Picture] Steering Sector - Right Hand - Has single gear (gear has 3 teeth followed by a wider spacer - followed by another 4 teeth ). Fits 8N S-N 216989 & up, NAA, Jubilee, 3600, 800, 601, 901, 2000, 4000, (1953 ->1964). If yours does not have 7 teeth, you can use this part but must replace both right and left sides. (61099S) (Part No: 251294) $144.38 [Show Picture] Steering Sector Shaft Seal - Felt seal comes in package of 2.Price is for pair. For Models: NAA, 8N 1948-1954. (Part No: 8N3586) $4.60 [Show Picture] Steering Shaft & Nut Assembly - Manual. For Models NAA & Jubilee (Part No: NAA3575C) $109.90 [Show Picture] Steering Shaft Seat & Seal Kit - Upper - For 8N, NAA. This kit contains: 8N3570 Seal (Item 3), 8N3520 Spring (Item 4), 8N3518 Seat (Item 5), 8N3517 Bearing (upper) (Item 6). (Part No: 8N_STRKIT) $29.99 [Show Picture] Steering Wheel - 17-1 2 inch diameter, 11 16" 36-spline hub. For 8N 1948-1952, NAA, 600, 700, 800, 900, 2000, 4000 (all 4 cylinder engines). NOT LIKE ORIGINAL - Modern version features covered spokes. (Part No: 8N3600) $37.42 [Show Picture] Steering Wheel Nut - Unfinished - Steering Wheel Nut - Unfinished - Acorn style nut, 11 16". Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S) $5.20 [Show Picture] Steering Wheel Nut, Black - Nut, steering wheel ACORN style. 11\16 -20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack) $5.00 [Show Picture] Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 11\16 -20. CHROME PLATED. For Models: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC) $16.36 [Show Picture] Steering Wheel, Splined Hub - Steering wheel OEM style, 17-1 2" diameter, 36-SPLINE hub. Metal spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA.(R2091) (Part No: 8N3600-OE) $52.14 [Show Picture]   Wheels Bearing Cup, Rear Axle - Bearing, Tapered Cup For 4120, 600, 800, 2N, 8N, 9N, JUBILEE, NAA. (Part No: 9N4222) $6.18 [Show Picture] Front Wheel Bearing Kit - For model 9N, 2N 1939-1947, 8N 1948-1952, NAA, Jubilee thru 1954. Kit includes inner bearing, outer bearing, seal. (Part No: CBPN1200A) $25.98 [Show Picture] Front Wheel Cap - For 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, all 1939 to 1957. Front Wheel Cap. (Part No: 2N1139B) $9.95 [Show Picture] Front Wheel Hub - For 8N, NAA. Front Wheel Hub. Uses CBPN1200A Wheel Bearing Kit. (Part No: 86511582) $65.90 [Show Picture] Front Wheel Nut Set - Set of 10 - Set of 10 1 2" - 20 wheel nuts. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C5NN1012B) $4.94 [Show Picture] Front Wheel Stud Bolt Set - Set of 10 - Front wheel stud bolt measures 1 2" X 2". Package contains 10 bolts - WITHOUT nuts. Note: Nuts are available by ordering p n C5NN1012B. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C5NN1107F) $9.90 [Show Picture] Lug Nut, Rear Wheel - Price shown is for package of 8. Fits the following Models built from 1948 to 1964: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, Dexta, Super Dexta. (Part No: 8N1134) $7.92 [Show Picture] Power Adjust Rim - 11x28, 4-rail type. For double ramp clamp. Holes in rail for stop body screw are drilled parallel to axle (not at angle). Use with stop body C0NN1057A, stop body screw C0NN1058A, clamp E5NN1043AA. Fits tire size 12.4 x 28, 13.6 x 28. Add addition $20.00 shipping due to weight. (Part No: C5NN1050H) $471.74 [Show Picture] Rear Rim - Six loop, 10" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Replaces NCA1020B. Add additional $15.00 to shipping due to weight. (Part No: NCA1020B) $148.56 [Show Picture] Rear Rim - Six loop, 11" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Add additional $25.00 per rim to shipping due to weight. (Part No: C5NN1050E) $125.32 [Show Picture] Rear Rim - Six loop, 12" x 28". For 2N, 8N, 9N, NAA, Jubilee, 600, 800, 900. Add additional $25.00 to shipping due to weight (Part No: R2068) $165.33 [Show Picture] Rear Wheel Center - For 28" & 32" Wheels, 8N, Dexta, NAA, Jubilee, 501, 600, 800, 700, 2000 EARLY, 4000 EARLY. Add additional $10.00 for shipping due to weight. (Part No: C5NN1036D) $151.58 [Show Picture] Rear Wheel Rim - 9x28 inch wide base demountable rim with 6 loop clamps. Fits tire size 11.2 x 28. Add $25.00 additional shipping due to weight. (Part No: NCA1020C) $94.60 [Show Picture]

Shopping Cart View Cart Checkout Phone Orders (800) 853-2651 Customer Service (360) 379-4808 Monday - Friday: 10:00 AM-6:30 PM EST Order online anytime! Your Shopping is Secure! Member of the Better Business Bureau

Order online or call (800) 853-2651

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us! We carry tractor parts and manuals for: Allis Chalmers, Case, Farmall, Ferguson, Ford, Fordson, International, International Harvester, John Deere, Massey Ferguson, Massey Harris, Oliver, and more. Products include: 3 Point Hitch parts, Alternators, Battery Accessories, Bearings, Belt-fan, Generator & Alternator, Brake Parts, Carburetor Repair Kits, Coils, Decals, Fenders, Generators, Hydraulic Cylinders, Ignition Kits, Manifolds, Mufflers, Paint, PTO Clutches, Radiators, Seals & Gaskets, Starter Drives, Starters, Tie Rod Ends, Tractor Gas Tanks, Tractor Seats, Water Pump Repair Kits, Water Pumps, Wheel Bearing Kits [Product Files] Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation Antique Tractor Headquarters All Rights Reserved TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.