Subject	Posted By
Re; New pulling pictures added	2 cyl pwr
Re; OTTPA CATPA Web Sites	2 cyl pwr
Re; PRESSED WHEEL HUBS FOR G JD	2 cyl pwr
Re; V-8 Allis	2 cyl pwr
Re; looking for wheel center converts	2 cyl pwr
Two Cylinder John Deere Pullers.	2 cylinder puller
7.5 Block for a JD-G Question?	2 cylinder
8500# Diesel Go Fast/ Hot Stock Class Questions?	2 cylinder
ADVICE ON BUILDING A STROKER JD-B	2 cylinder
ANY USED STROKER CRANKS FOR JOHN DEERE-B FORSALE?	2 cylinder
Anymore Word on the Mt.Pleasant, MI Pull for 2003?	2 cylinder
Anyone know how far a John Deere B Powerblock can be BORED?	2 cylinder
Anyone using the 7.5 Block in the JD-G?????????	2 cylinder
BEST CYLINDER HEAD TO USE FOR A 42 JD-B WITH A POWERBLOCK?	2 cylinder
BORE JD-G POWERBLOCK	2 cylinder
BUILD A JD-B PULLER	2 cylinder
CYLINDER HEAD QUESTION FOR 42 JD-B?????	2 cylinder
Can you get a 4010-JD into a 6000# farm class?	2 cylinder
Cement Tractorpull Sat. 4-26-03 at Shepherd, MI	2 cylinder
DID ANYONE PULL UP TO HAWKINS MI. ?	2 cylinder
DID ANYONE PULL UP TO WEST BRANCH MI. ?	2 cylinder
Gladwin County Fair Pull in Michigan, when is it??	2 cylinder
HEY BIGMOTORS	2 cylinder
HOW FAR CAN YOU MILL A JOHN DEERE B CYLINDER HEAD?	2 cylinder
HOW MUCH HORSEPOWER FROM A JD-G 7.5 BLOCK?	2 cylinder
HOW MUCH HORSEPOWER TO RUN 3500# CLASS?	2 cylinder
IS IT POSSIBLE TO GET A 7.5 SLEEVE KIT FOR A JD-G BLOCK? AND IF SO WHO BUILDS THEM AND WHAT KIND OF PRICE TAG ARE WE LOOKING AT?	2 cylinder
JD-B HORSEPOWER FROM A POWERBLOCK.	2 cylinder
JD-B POWERBLOCK, WHAT CAN I EXPECT TO PAY FOR ONE	2 cylinder
JOHN DEERE BIG NUT CARB. QUESTION	2 cylinder
John Deere B cylinder head, how much can it be mil	2 cylinder
LOOKING FOR A SLEEVE KIT FOR LATE MODEL JD-D.	2 cylinder
LOOKING FOR JD-B POWERBLOCK	2 cylinder
MARION FAIR (MICHIGAN)TRACTOR PULL JUNE 16TH	2 cylinder
NEED RINGS FOR JD-B POWERBLOCK!	2 cylinder
OVER SIZE VALVES FOR JD-B CYLINDER HEAD??	2 cylinder
Philipps 66 rear tires any good for pulling?	2 cylinder
Pulling cam for JD-A	2 cylinder
Pulls at Gladwin and Harrison Michigan, When are t	2 cylinder
Pulls in Central Michigan around July 4th?????	2 cylinder
Question about Milling JD-B Head?	2 cylinder
Rim width for 12.4x38's?	2 cylinder
Re; 520 tires to big?	2 cylinder
Re; BUILDING A SUPER JD G	2 cylinder
Re; Re; J.D. EATS UP DRIVER	2 cylinder
Re; Re; Remus Mi. tractor pull	2 cylinder
Re; Re; wheelie bars	2 cylinder
WHAT IS A JD-B POWERBLOCK WORTH?	2 cylinder
WHAT IS THE MAXIMUM YOU CAN BORE A JD-B POWERBLOCK	2 cylinder
Re; charleston pull sat 20 indiana 5.00	2 fat 2 fly
Re; elnora usap tractor pull friday night	2 fat 2 fly
Re; Re; charleston pull sat 20 indiana 5.00	2 fat 2fly
Re; radar speed unit	2 flaws
whos ready for pulling season?	2 lil to L8
Re; john deere a compression	2 lunger
john deere a compression	2 lunger
Re; 2 Cylinder Flywheel Balance	2 n.d. that Ed!!!!!!
Re; Joe Zip don't know	2 n.d.
Re; 32000# + 720 gasser	2 questions
Re; STOCK RODS VERSES ALUMINUM CUSTOM RODS	2 stroke
Re; Supercharger on 460	2 words
Re; Cleveland, Ms Pull	2-Way
Re; MILLINGTON, TN PULL SEPTEMBER 14th	2-Way
Mt. home pull	2-tone
Burton's Sugar Farm on RFD TV	2-way
Re; Don't understand.	2-way
Re; Duck Hill Ford	2-way
Re; Holly Springs Pull Saturday	2-way
Re; Holly Springs,MS pull the 25th	2-way
Re; Holly springs pull	2-way
Re; Kubota	2-way
Re; MILLINGTON, TN PULL SEPTEMBER 14th	2-way
Re; NEW ALBANY, MS PULL	2-way
Re; Old Gray A name change?	2-way
Re; Page of CHAMPIONS in HOOK	2-way
Re; Sugar Farm Pull over 220 hooks	2-way
Re; Tippah County Pull	2-way
Sweepers victories	2-way
Here's an IDEA	2005 Tunica Puller
Installing a Jerry's block in a Deere	2007 puller
Re; Indoor Antique Pull April 5 April 26	2008
330 continental mods?	203massey
Re; H -350 Cam	220redH
Re; any pulls in the near future in the IL area?	221
Re; Mean 77 on Ebay ??	2236md
Re; Super C	2236md
Re; tips on Super C pullers	2236md
Re; tractor pull fri 16th	2255tr
Re; Farmall 400 NEW PULLER	230 puller
Re; NYS Champ Pull in Locke, NY	230-46BPuller
Re; pulls in N.Y. on july 4th.	230-46b puller
Re; 1940 JD B Carb ?s	23046Bpuller
Tractor Pulls in CNY, 2007	23046bpuller
231.9 c.i.	231.9 c.i.
400lp v. 450lp head	235
620 power	235
620, 720 parts swap?	235
Crum exhaust	235
Different motor for farmall M	235
Flywheel swap	235
Front tire size?	235
Hey Seamo	235
How much power can an oliver 88 make	235
Lowering front end on 620	235
Most powerful pullers?	235
Need Help	235
Need help	235
Need pistons	235
Schooler Motorsports, has anyone used them?	235
Turbo for 4020	235
Valves	235
What size valves?	235
Whens the next Princton IN pull?	235
Who does intake work?	235
Continental 140 needs more grunt	240 jockey
Re; cokshutt 40 motor	262
MOTOR BUILDERS	263 build
Re; 16.9-34 tires on 18.4-34 rims?	263 build
Re; ?s about using the T/A	263 build
Re; John Deere 9 Bolt Hubs for 4010	263 build
Re; Lowering The Front End	263 build
Re; MOTOR BUILDERS	263 build
Re; d21	263 build
Re; stockclassic	263 build
bigger carb?	263 build
d21	263 build
foam in your rear?	263 build
hitch position????	263 build
piston specs	263 build
c263	263build
cam grind	263build
Re; 600 case	264SS
Re; An Alcoholic pulling tractor??	264ss
Re; Calling all M-M 5-star pullers	264ss
Re; Cubic inch help	264ss
Re; Re; Re; 560 puller	264ss
Re; Re; Re; Re; Re; Re; Re; Re; Re; 560 puller	264ss
Re; Re; Too Much HP?	264ss
Re; Sevierville tractor pull	264ss
Re; Stock Shootout; Which Tractor is Best?	264ss
Re; Tornado intake on farmall	264ss
Re; weight dist.	264ss
Farmall H engine mods.	26Red
Little Minnie mo, help	27601549
D301 piston help	282 Puller
Re; falling on it's face!	2
Re; need some JD G parts	2CYL Puller
JOHN DEERE D PISTONS?	2CYLINDERPOWER
Re; Camshaft for John Deere A	2CYLPULLER
Re; run whata brung pull	2Minnie/Been there D
stroking a 450	2SUPERM
Re; Holly Springs, MS Pull	2_way
Re; Sugar Farm Pull over 220 hooks	2_way
52 A engine work	2cylinderfan
52 A puller	2cylinderfan
88 super diesel	2cylinderfan
JD A CRANK	2cylinderfan
Re; 52 A engine work	2cylinderfan
Re; 52 A puller	2cylinderfan
Re; 88 super diesel	2cylinderfan
Re; JD A CRANK	2cylinderfan
Re; JOHN DEERE B	2cylinderfan
Re; July 12 and 13 th Wisconsin Pulls	2cylinderfan
Re; Sport tragically loses another puller	2cylinderfan
Re; jd a head	2cylinderfan
Re; Good Luck	2cylpwr
Re; Oliver Super 88	2nd Answer
Re; NATPA Pull	2nd That!
Re; Mo. Pull this weekend	2nd That
Re; Tunica Pull	2nd That
Re; fruitland mo, pull	2nd That
Head Question;flow vs. compression(farmalls)	2nd to no 1
450 LP VALVES	2superms
450 LP valves	2superms
Copper head gasket	2superms
Low gears for H farmall	2superms
MW Pistons	2superms
Princeton Pull on 19 of January	2superms
Re; Copper head gasket	2superms
Re; Re; Taylor dyno	2superms
Re; Super H handclutch for pulling	2superms
Re; Tunica, Ms pull	2superms
Re; Twins (Tunica)	2superms
Re; m@w 4.250 sleeves	2superms
Super H handclutch for pulling	2superms
Taylor dyno	2superms
Tunica king of the hill start time	2superms
Re; Detroit Diesel fuel question	2t2@ia
Re; Re; Re; Re; Re; Re; Re; Getting ready	3 MPH?
Re; magic springs	3 Words
Re; How long should the horn blow?	3 beeps
Re; semo district fair antique pull	3 cyl
Re; jd r	3 cylinder popper
Re; farmall m govenor and distirbutor drive	3 words
Re; Re; Re; Re; looking for pulling block for my M	3-4-1 PULL
Re; looking for pulling block for my M	3-4-1 PULL
Re; 30.5 x 32 needed	30.5 s
Pull in Henry Ill.	300 Randy
Solid Junk	300 Randy
Re; Ford 300-6 in Oliver 88 ???	300 fords
Re; 460 farmall govenor help	300
Re; High compression H head	300
Re; Pulling with a W-4.	300
Re; Webb S	300
Re; Wide front H	300
Re; boring an m block	300
Re; tires	300
Webb S	300
Re; SHOW AND PULL	300ft
New Generation Deere's	3020 power
Re; G cam question.	3020
Re; tires	3020
18.4 38 Tires	3020Deere
JD 6030s Rule the Roost in NJ	3020Deere
9-bolt hubs for an IH H	306 m-puller
Re; Re; Re; Re; Re; Farmall M motor build up	306 m-puller
Re; Re; Re; Re; Re; Re; Re; Farmall M motor build	306 m-puller
Noble Co. indiana pulls	306-m puller
9-bolt hubs	306m-puller
Ammeter vs. voltage meter????	306m-puller
Farmall heads	306m-puller
Massey harris 44 hubs	306m-puller
Princeton IN pull	306m-puller
Pulls in T.C./Gaylord, MI area	306m-puller
Rock-It Governor	306m-puller
Got my M puller running today	306mpuller
Darke County Pulls	307 M
310 Diesel Deck Plate	310 Puller
Re; Oliver Super 77 Diesel Needs to go on a Diet	310 puller
Re; any pulls in new port richey florida week of	310 puller
motor won't lug like it should. cam question.	310 puller
1100 Massey head	310 to yuma
Looking for advice F320G pullers	320 puller
Re; waukesha 320 stroking	320
1959-1963 International 660	327Nick
Re; 44-6 puller	32s
Re; spark plug	335LP
350 pistons	350 farmall guy
350 powercraters	350 farmall guy
H or 350 governor	350 farmall guy
C 281 in a 350 Farmall	350 puller
Re; C 281 in a 350 Farmall	350 puller
farmall head?	350man
Re; Texas Pull	35jda
wd45 stroker parts	35jda
Re; Unstyled A more power	36 A Puller
Building a JD A puller	36 A
cam grinder	36 A
B connecting rods	36 A
Carb troubles on G	36 A
Chad s E85	36 A
Ettric Wisconson pull	36 A
Exhaust pipe	36 A
Jp Dunn	36 A
Oil rings	36 A
Old Power Pride Tractor did it ever get finished	36 A
Re; 1937 JD Unstyled A	36 A
Re; Carb troubles on G	36 A
Re; Hiesler gas manifold	36 A
Re; JD G Pullers	36 A
Re; Looking For Old Power Pride Magazine again	36 A
Re; Lyle MN pull	36 A
Re; Next Game Pulling game is done	36 A
Re; Oil rings	36 A
Re; WTW B connecting rods	36 A
Re; When is Mabel, MN show?	36 A
Re; un style A	36 A
Re; welding cranks	36 A
Sigourney pull	36 A
WTW B connecting rods	36 A
Wis pull	36 A
cam grinding information.	36 A
hiesler head and manifold not impressed	36 A
how much snow in sigourney	36 A
murphy's rockers	36 A
olmstead co fair in Mn	36 A
pulling a DC case	36 A
pulling a DC	36 A
small crank jornal	36 A
tire hardening	36 A
welding cranks	36 A
Re; farmall f 20 pulling tractor	36F20
Re; Clutch on G JD	36Speciall
Re; Any pulls in the Carolinas in April?	36deere
Re; farmall f 20 pulling tractor	36f20
Re; MoSAC TPA info	36special
Re; sterling co.	37ACWC
Re; question about Farm Stock	37JDAA
Re; M-M R vs. ZT Tranny Strength and H.P.	37ZTU
allis clutch	37jda
allis hand clutch	37jda
CHADS	38 G JD
Re; CHADS	38 G JD
Re; Next pull in Northeast Kansas?!	38 JD G
TAZ460	38 JD G
Re; Strongest G Walkin Tall	38 puller
Compression	38JDHaypress
cubes to HP	38JDHaypress
anything at Denny's?	38JDgm
Getting air to a allis	38jda

Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

Home | Manuals | Parts | 12-Volt Kits | Carburetors | Radiators | Engine Kits | Videos | Books Know someone interested in antique tractors? Tell them about this site! Your EMail Addr Your Name Friend's Email Friend's Name Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters

About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.