Subject	Posted By
Re; Tractor pull	1st Time?
Re; Moline intake?	1st a puller
Re; Which manifold for a 4010 turbo addition?	1st a puller
compression	1st a puller
Re; PULLING 39 A	1st gear
BLACK WIDOW BITES RULE BENDER	1st place
Re; BLACK WIDOW BITES RULE BENDER	1st place
Re; Re; WANTED JOHN DERRE TIRES	1st time puller
WANTED JOHN DERRE TIRES	1st time puller
low$$$allis	1st timer
BIG DADDY????	2 CYL PWR
BIG DADDY?????????????	2 CYL PWR
TRACTOR PULL IN SALEMBURG, NC	2 CYL PWR
9 bolt adaptors for john deere G	2 CYL PWR
Re; 9 bolt adaptors for john deere G	2 CYL PWR
SEARCHING FOR BIG DADDY	2 CYL PWR
Re; Camshaft for John Deere A	2 CYLINDER
WHEN IS THE PULL AT GLADWIN, MI AND WHAT CLASSES?	2 CYLINDER
Re; 18.4x38's on a JD A?	2 Cylinder to a pull
Isabella Co. Fair (Mt. Pleasant, MI) Pull, Where	2 Cylinder
18.4 x 34's WHAT ARE THEY WORTH??????	2 Cylinder
ANY INFO ON JULY 2ND PULL A ROSEBUSH MI.	2 Cylinder
ANYBODY PULL IN EVART, MI????????????	2 Cylinder
Anybody go to the Armada, MI tractorpull????	2 Cylinder
Clare County Fair (MI) to have 6000# local pull.	2 Cylinder
Evart, MI Pull on 9-20-03. Need Info.?????	2 Cylinder
Farm Stock Pull 8-6-03, at Mt. Pleasant, MI	2 Cylinder
First Pull for Mid/Central MI?	2 Cylinder
Gladwin, MI County Fair Pull July 19th, any Rule I	2 Cylinder
Gladwin, MI farm stock pull starts at 4pm on 19th.	2 Cylinder
Hey A Puller, You guys going to Evart, Mi on 9-18-	2 Cylinder
Hey bigmotors what is your E-mail address?	2 Cylinder
IS THERE A PULL ON 6-12-04 AT COLEMAN, MI ????????	2 Cylinder
Info. on Mt. Pleasant, MI Fair Pull	2 Cylinder
Info. on the Pull at EVART, Mich. this weekend???	2 Cylinder
John Deere 9 Bolt Hubs for 4010	2 Cylinder
Let all remember the true meaning of Christmas!	2 Cylinder
Looking for #1 JD-A Powerblock?????	2 Cylinder
May 20th pull at Evart, Michigan???????????	2 Cylinder
Michigan Summer Pull Schedules for 2004?	2 Cylinder
Mid Michigan pulls on Labor Day Weekend????	2 Cylinder
NO SHEPHERD MI TRACTORPULL. WHAT HAPPENED??	2 Cylinder
PICKUP TRACTORPULL AT ROSEBUSH, MI ON July 3rd.	2 Cylinder
PULL AT EVART MICHIGAN, WHEN AND WHAT RULES????	2 Cylinder
Pull May 20th at Evart Michigan, need Info.	2 Cylinder
Pull at Mt. Pleasant, MI Wed. 8-10-05	2 Cylinder
Questions about Mt. Pleasant, MI Tractorpull???	2 Cylinder
Questions about Mt. Pleasant, MI Tractorpull????	2 Cylinder
REMUS, MI PULL, DID THE RAIN HOLD OFF????	2 Cylinder
Re; JD's Big pistons where???	2 Cylinder
Re; 15.5 X 38 Tires Hard To Find?	2 Cylinder
Re; 16.9 X 38 and proper rim width	2 Cylinder
Re; 18.4x38's on a JD A?	2 Cylinder
Re; 1948 JD G	2 Cylinder
Re; 1950 JD A powerblock	2 Cylinder
Re; 1950 John Deere B Stock	2 Cylinder
Re; 37 A	2 Cylinder
Re; 52 JD A weight	2 Cylinder
Re; 620 john deere puller	2 Cylinder
Re; 630...getting it done...!!	2 Cylinder
Re; 7 inch sleeves in G block ?	2 Cylinder
Re; A BAD Division 3 Tractor	2 Cylinder
Re; A pull of a different nature,,,	2 Cylinder
Re; ANY JD B PULLERS OUT THERE, NEED ADVICE	2 Cylinder
Re; Air pressure in tires for 3mph antique classes	2 Cylinder
Re; Any good Pulling How To books available?	2 Cylinder
Re; Any other places to sell puller?	2 Cylinder
Re; Anyone around the St. Louis area	2 Cylinder
Re; Armstrong tires for pulling??-- Prize money	2 Cylinder
Re; Armstrong tires for pulling??	2 Cylinder
Re; Auburn pull rescheduled	2 Cylinder
Re; Best uncut tire to use?	2 Cylinder
Re; Cast wheels vs pressed steel on JD 70	2 Cylinder
Re; Cement tractor pull-shepherd	2 Cylinder
Re; Clubs allowing Newer Tractors 06????	2 Cylinder
Re; Cold ,or gas manifolf for John deere G	2 Cylinder
Re; Crank Stroking	2 Cylinder
Re; Deere A lightest STOCK weight?	2 Cylinder
Re; Div. 3 Antique pulling in northwest ohio	2 Cylinder
Re; Drawbar heighth problem	2 Cylinder
Re; Driver pull??	2 Cylinder
Re; E-3 Co-op pulling on asphalt	2 Cylinder
Re; Evart Michigan Pull (200$ first)	2 Cylinder
Re; Fall Festival Pull In Western Mi.	2 Cylinder
Re; Frames	2 Cylinder
Re; G Jd Pistons	2 Cylinder
Re; G PULLIN TIRES	2 Cylinder
Re; G Pistons	2 Cylinder
Re; G Weight	2 Cylinder
Re; G puller	2 Cylinder
Re; G pullers........need your advice	2 Cylinder
Re; G; Rollamatic	2 Cylinder
Re; Getting in the game?	2 Cylinder
Re; Good Year tires any good?	2 Cylinder
Re; HOW MUCH HORSEPOWER OUT OF A 6-2 POWER BLOCK	2 Cylinder
Re; Heisler head	2 Cylinder
Re; Help with JD G Head	2 Cylinder
Re; How about some newbie pulling tips?	2 Cylinder
Re; How many tractors at your pull?	2 Cylinder
Re; Is this hitch safe?? (picture)	2 Cylinder
Re; JD A BLOCK	2 Cylinder
Re; JD A POWER	2 Cylinder
Re; JD A pulling left	2 Cylinder
Re; JD B Block	2 Cylinder
Re; JD B manifold	2 Cylinder
Re; JD G Flat Head	2 Cylinder
Re; JD G PROBLEM	2 Cylinder
Re; JD G horsepower	2 Cylinder
Re; JD G	2 Cylinder
Re; JD H PULLER	2 Cylinder
Re; JD LA	2 Cylinder
Re; JD MT motor	2 Cylinder
Re; JD PRESSED WHEELS	2 Cylinder
Re; John Deere 70 Power Block Pistons	2 Cylinder
Re; John Deere A 6-2 Powerblock Bore	2 Cylinder
Re; John Deere A	2 Cylinder
Re; John Deere B head	2 Cylinder
Re; John Deere B questions	2 Cylinder
Re; John Deere D	2 Cylinder
Re; John Deere G Knocking	2 Cylinder
Re; John Deere G Two Extreme	2 Cylinder
Re; John Deere G	2 Cylinder
Re; John Deere H	2 Cylinder
Re; John Deere g	2 Cylinder
Re; John deere A	2 Cylinder
Re; Letting newer tractors pull	2 Cylinder
Re; Lightening up a JD B	2 Cylinder
Re; Looking for cheap horsepower	2 Cylinder
Re; Maxi Trac	2 Cylinder
Re; Michigan pullers with fenders	2 Cylinder
Re; Michigan pulls	2 Cylinder
Re; Money Pull	2 Cylinder
Re; Money Pulls	2 Cylinder
Re; Mt. Pleasant MI pull, Aug.11rules	2 Cylinder
Re; Mt. Pleasant MI pull	2 Cylinder
Re; Mt. Pleasant Mi. fair pull Aug 11th	2 Cylinder
Re; NATPA Sandusky MI	2 Cylinder
Re; NEW TO PULLING	2 Cylinder
Re; Need 5 more HP	2 Cylinder
Re; Need a stroked crank	2 Cylinder
Re; Need help with finding 6.50 inch aluminum pist	2 Cylinder
Re; PRE-BOUGHT PULLLERS IN EASTERN KANSAS	2 Cylinder
Re; Petcocks in a powerblock	2 Cylinder
Re; Porting and Polishing	2 Cylinder
Re; Power of a stock G	2 Cylinder
Re; Pull at Hersey Michigan June 3?	2 Cylinder
Re; Pulling Techniques	2 Cylinder
Re; Pulling a John Deere H	2 Cylinder
Re; Question for JD guys...engines	2 Cylinder
Re; Re; Hey bigmotors what is your E-mail address?	2 Cylinder
Re; Re; How do I tell if my JD 60 has a power bloc	2 Cylinder
Re; Re; JD 60 pulling tires	2 Cylinder
Re; Re; JD A Power Block	2 Cylinder
Re; Re; JDG Question(s)	2 Cylinder
Re; Re; Michigan Pulls?	2 Cylinder
Re; Re; NEED A 7 INCH G BLOCK HELP ME	2 Cylinder
Re; Re; Parts?	2 Cylinder
Re; Re; Re; 14.9x38 vs. 15.5x38	2 Cylinder
Re; Re; Re; 60 HP JD A	2 Cylinder
Re; Re; Re; Anyone around the St. Louis area	2 Cylinder
Re; Re; Re; Evart Michigan Pull (200$ first)	2 Cylinder
Re; Re; Re; How about some newbie pulling tips?	2 Cylinder
Re; Re; Re; JD A POWER	2 Cylinder
Re; Re; Re; Re; Cost	2 Cylinder
Re; Re; Re; Re; Hey bigmotors what is your E-mail	2 Cylinder
Re; Re; Re; Re; J.D. EATS UP DRIVER	2 Cylinder
Re; Re; Re; Re; power block for jd a	2 Cylinder
Re; Re; Remus Mi pulls	2 Cylinder
Re; Re; Wanted to buy, 18.4 x 38 BF Goodrich Power	2 Cylinder
Re; Re; pure STOCK tractor pulling?	2 Cylinder
Re; Remus Mi pulls	2 Cylinder
Re; Safety kill switch ?	2 Cylinder
Re; Shepherd MI pull??	2 Cylinder
Re; Stroked JD R's????	2 Cylinder
Re; TIRES	2 Cylinder
Re; Tire Grinding Discs	2 Cylinder
Re; Tire questions	2 Cylinder
Re; Tires too big???	2 Cylinder
Re; Tires	2 Cylinder
Re; Tractor Supply Powerblock	2 Cylinder
Re; Uncut Tires	2 Cylinder
Re; What Kind of Pulling Tractor Do You Have???	2 Cylinder
Re; What Tire Size is legal?????	2 Cylinder
Re; What size pressed steel wheel for a JD A	2 Cylinder
Re; Wheelie bars for G ?	2 Cylinder
Re; Wheelweights verses suitcase ?	2 Cylinder
Re; Where to hang my weights??	2 Cylinder
Re; Who has the strongest G John Deeres?????	2 Cylinder
Re; Witchita Pull	2 Cylinder
Re; after market air filter on john deere	2 Cylinder
Re; anyone heard of maxi trac	2 Cylinder
Re; b heads	2 Cylinder
Re; blow by	2 Cylinder
Re; dyno and weight reduction	2 Cylinder
Re; first time puller ? Tires	2 Cylinder
Re; flat head on styled G with high compression pi	2 Cylinder
Re; hey two cylinder	2 Cylinder
Re; hitches	2 Cylinder
Re; how bout a Deere 4000?	2 Cylinder
Re; insurance new rule	2 Cylinder
Re; jd 4020 4010 wieght	2 Cylinder
Re; jd g pistons 90 over	2 Cylinder
Re; john deere A powerblock	2 Cylinder
Re; john deere questions???	2 Cylinder
Re; light cast centers	2 Cylinder
Re; looking for JD-B light prest steel in MI	2 Cylinder
Re; lowering frontend	2 Cylinder
Re; more power for stock G JD	2 Cylinder
Re; need power for JohnDeere B	2 Cylinder
Re; osceola pull	2 Cylinder
Re; placing weights on a tractor	2 Cylinder
Re; power adjusting rims and the best tire?	2 Cylinder
Re; power block for jd a	2 Cylinder
Re; power block	2 Cylinder
Re; powerblock #2	2 Cylinder
Re; pulling on a budget / please help	2 Cylinder
Re; spicing up my R	2 Cylinder
Re; tires	2 Cylinder
Re; traction	2 Cylinder
Re; tractor pull in marquette michigan	2 Cylinder
Re; tractor pulls in so.mi,north in. july,28,29,30	2 Cylinder
Re; wheelie bars?	2 Cylinder
Re; who da man?	2 Cylinder
Remus, MI pull on 9-13-03 Questions??	2 Cylinder
Remus, MI pull on Labor Day Weekend???	2 Cylinder
Rosebush, Mich. Pull July 2nd, Need Info.?????	2 Cylinder
Rules for Evart, MI pull 9-20-03???	2 Cylinder
THOUGHT ON THE GLADWIN COUNTY, MI PULL????	2 Cylinder
TRACTOR PULL SEPT. 18TH AT EVART, MI???	2 Cylinder
Tractor Pull Tomorrow! Mt. Pleasant, MI 1PM	2 Cylinder
Tractorpulls in the Central Michigan Area????????	2 Cylinder
WHEN IS THE HAWKIN'S MI. PULL???	2 Cylinder
What are the starting Times for Evart, MI tractorp	2 Cylinder
What is my Powerblock JD-A worth????	2 Cylinder
When is the Marion, MI Fair Pull?	2 Cylinder
When is the pull at Hersey, Michigan????	2 Cylinder
Re; John Deere G	2 Extreme
Re; Norfolk, Ne pull	2 Extreme
Re; Strongest G (2-cylinder)	2 Extreme
Re; TWO EXTREME JD	2 Extreme
Light weight JD A	2 HAL JD
Ft.Scott Pull	2 Minnie
Hey Joe Zip	2 Minnie
Lawrence, K.S. Tractor Pull	2 Minnie
Lawrence,Ks. tractor pull	2 Minnie
Need a sled to rent.	2 Minnie
Pulling sleds	2 Minnie
Re; Att. all six cylinder MMshave a question	2 Minnie
Re; Du Chen	2 Minnie
Re; Enjoyed Lawrence and McClouth!	2 Minnie
Re; Hey Joe Zip	2 Minnie
Re; Iola ks. pull	2 Minnie
Re; To all local Kanas pullers-	2 Minnie
Re; What do you pull a minn	2 Minnie
Re; Whiney Whinerson osk	2 Minnie
Re; cheese with that whine?	2 Minnie
Re; falling on it's face!	2 Minnie
Re; hey oskpuller	2 Minnie
Re; lawrence ks.pull	2 Minnie
Re; new generation deere	2 Minnie
Re; osk's b jd	2 Minnie
Re; run whata brung pull	2 Minnie
Re; should of been there to day mr thinker	2 Minnie
hey oskpuller	2 Minnie
Re; Hauling our toys questions??????	2 banger
in your opinion	2 banger
Re; Re; Re; Re; Rushville pull info and looking fo	2 bangin beast(power
Re; Re; Rushville pull info and looking for power	2 bangin beast
Rushville pull info and looking for power block(JD	2 bangin' beast
Re; JD or AC	2 cents
BIG DADDY????-----SATPA SCHEDULE	2 cyl pwr
Denton, NC Pulling Order	2 cyl pwr
SATPA Rules	2 cyl pwr
EASTERN NC PULL 25th and 26th of OCT	2 cyl pwr
Re; JD 820 Modified for JDGnut	2 cyl pwr
Re; FOUR OATS PULL	2 cyl pwr
Re; I Feel it!	2 cyl pwr
Re; New pulling pictures added	2 cyl pwr
Re; OTTPA CATPA Web Sites	2 cyl pwr
Re; PRESSED WHEEL HUBS FOR G JD	2 cyl pwr
Re; V-8 Allis	2 cyl pwr
Re; looking for wheel center converts	2 cyl pwr
Two Cylinder John Deere Pullers.	2 cylinder puller
7.5 Block for a JD-G Question?	2 cylinder
8500# Diesel Go Fast/ Hot Stock Class Questions?	2 cylinder
ADVICE ON BUILDING A STROKER JD-B	2 cylinder
ANY USED STROKER CRANKS FOR JOHN DEERE-B FORSALE?	2 cylinder
Anymore Word on the Mt.Pleasant, MI Pull for 2003?	2 cylinder
Anyone know how far a John Deere B Powerblock can be BORED?	2 cylinder
Anyone using the 7.5 Block in the JD-G?????????	2 cylinder
BEST CYLINDER HEAD TO USE FOR A 42 JD-B WITH A POWERBLOCK?	2 cylinder
BORE JD-G POWERBLOCK	2 cylinder
BUILD A JD-B PULLER	2 cylinder
CYLINDER HEAD QUESTION FOR 42 JD-B?????	2 cylinder
Can you get a 4010-JD into a 6000# farm class?	2 cylinder
Cement Tractorpull Sat. 4-26-03 at Shepherd, MI	2 cylinder
DID ANYONE PULL UP TO HAWKINS MI. ?	2 cylinder
DID ANYONE PULL UP TO WEST BRANCH MI. ?	2 cylinder
Gladwin County Fair Pull in Michigan, when is it??	2 cylinder
HEY BIGMOTORS	2 cylinder

Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

Home | Manuals | Parts | 12-Volt Kits | Carburetors | Radiators | Engine Kits | Videos | Books Know someone interested in antique tractors? Tell them about this site! Your EMail Addr Your Name Friend's Email Friend's Name Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters

About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.