Subject	Posted By
doniphan pull the rest of the story	Arkansas flash
tractor pulls this weekend	Arkansas red
Attention TUNICA Pullers	Arkansas
States represented at Tunica	Arkansas
States so far at Tunica	Arkansas
Re; A story about a plaque for Patches!	Arkie
Re; Arkansas PULLERS BEWARE	Arkie
Re; Aftermarket pistons and sleeves	Arky
Re; Case 600 indiana eagle	Arky
Re; Question For NATPA	Arky
Re; Re; Re; Aftermarket pistons and sleeves	Arky
Re; Re; WD45 stroked crank	Arky
Re; building a AC WD45	Arky
NATPA SUMMER PULL	Arlan Campbell
NATPA Summer pull	Arlan Campbell
NATPA summer pull	Arlan Campbell
Re; NATPA summer pull	Arlan Campbell
STPA PULL MAY 3rd	Arlan Campbell
MAY 3rd tractor pull	Arlan
Re; pulls in south central mo	Arlan
Re; JD 60 HEAD WILL IT FIT	Arll NY
Re; OIL?!?	Armada Tamada
Re; Best 18.4-38	Armstrong
KS and Mo Pulls from around June til winter?	Army Dude in Afghanistan
Re; KS and Mo Pulls from around June til winter?	Army Dude in Afghanistan
ChadS-what have you done, lately?	Arnie
Iowa State Fair	ArnieK
Re; Akron Pull; NCIATPA	Arnold S.
Voodoo 4-Sale?	Arnold S.
Re; Re; Voodoo 4-Sale?	Arnold S
Re; Re; BEATON UP ON ChadS	Arnold
Re; Re; SEE Y'ALL AT TUNICA	Arnold
Re; AC 190 XT How Light A Puller	Around here
Re; Too Many Clubs too Few Tractors	Aroundtown puller
sun aug 3, noonish start	Arpin,wi
Re; 1963 MF 97 MM 705	Art Arfons
looking to buy a pull tractor	Art Dowd
Re; Re; Re; Adam Coleman you out there?	Art Wooden aka B
656 differential	Art Wooden
D130 06 Deutz parts	Art Wooden
3.5-4mph sign up	Art
78931js at Dekalb	Art
Dayton pull	Art
Fruitland Pull	Art
Fuel specs	Art
Guarenteed winner	Art
Hey burns	Art
John Aller	Art
Oliver rods	Art
Re; Re; a cure for a cherping turbo????	Art
Re; HART PUMKIN FESTISBLE	ArtCar
Pull in Medway Ma?	Arthur
Re; turbo help	Artwooden
Re; front weights that move	As long as
9 bolt hubs	Asa Buck
Re; larry machine shop	Asdfdd
All detroit pull	Ashley
Re; All Detroit Class Pull	Ashley
Re; Re; All detroit pull	Ashley
Re; deutez for pulling??	Ashour abd elhameed
Re; Re; 1951 JD B horsepower????????	Ask CHADS......
Re; NATPA Championship Weekend	Asking questions
Re; New Arkansas Rock Crusher Owner/Operators	Asleep at the wheel
Edgar,wi blacktop pull	Asphalt puller
Re; Weight transfer sled on asphalt	Asphalt puller
Re; Chads	At Goshen
Wheelie bars	At work
Re; Double disc clutch for a International 460	Atex57
Re; Need half gear for 930 Case	Atex57
Re; Oliver 88 Trans	Atex57
Re; Pro Stock Diesel	Atex57
Re; V-8 Pulling Tractor ????? Help............	Atex57
Re; Re; Any Way To Posi Track a Farmall M?	Athyrio
Re; U Moline rearend?	Atod
Re; Hey, Jack A	Atoz
Re; NEED TO KNOW WHAT THE STARTER	Attack
Re; best pulling truck motor	Attack
Spark plugs for a JD A	Attack
What size valves in a big Cubi c inch JD A?	Attack
Re; Why doesn't NATPA UP the years allowed?	Attend meeting
fruitland track	Attention Brockmires
Length of strait pipe on Farmall Super M	Atw
Farmall Super M governor spring for pulling	Atw
Re; Farmall Super M governor spring for pulling	Atw
Re; WNY Gas and Steam Engine Pull Sept. 4th-7th	Atw
Re; WNYGSEA	Atw
Using threaded rod to hold rear wheel weights on.	Atw
Re; Re; U moline weight	Au two
Re; LAOTTO	Auburn puller
Fishersville Virginia Pull	Aug 7th 4PM
Bore solvent	Augie
Button clutches	Augie
Good Grief	Augie
Less weight, more spring	Augie
Look up	Augie
MO State Fair results?	Augie
Moline R	Augie
More Moline action	Augie
Not a R governor	Augie
Pulled mine Saturday night	Augie
Re; Lightest VAC Case ????	Augie
Re; 44 Standard	Augie
Re; An Alcoholic pulling tractor??	Augie
Re; Antique puller phase out	Augie
Re; Any Pulls in Central/NE Missouri This Weekend?	Augie
Re; Any pulls in East Central part of Mo. in 05'	Augie
Re; Best 2500-3500 puller	Augie
Re; Buyers BEWARE !!	Augie
Re; C-113 Farmall B pistons	Augie
Re; Cutting the fat off M-M R	Augie
Re; Farmall A	Augie
Re; Farmall A???	Augie
Re; Farmall H	Augie
Re; Found something interesting,,	Augie
Re; H bore	Augie
Re; H hubs	Augie
Re; Hey Mopower, ChadS	Augie
Re; INDIANA EAGLE	Augie
Re; Is there a cam grinder that gives a hoot !	Augie
Re; Just dont understand	Augie
Re; K+N air filter for Farmall Super M	Augie
Re; Lightweights	Augie
Re; Missouri State Fair Pull	Augie
Re; Missouri State Fair	Augie
Re; Moline R	Augie
Re; Need MM square port heads	Augie
Re; Re; CASE VAC Help needed	Augie
Re; Sled Rental	Augie
Re; Stock Class 1958 Limit...Opinions?	Augie
Re; Super C HP	Augie
Re; Tractor Puller's Salvage Yard	Augie
Re; V- Pullers	Augie
Re; Vac. Case good puller or not.	Augie
Re; Winter Puller Projects Anyone?	Augie
Re; Women Shiny Things	Augie
Re; cam grinding with lower compression?	Augie
Re; engine size	Augie
Re; farmall h hubs	Augie
Re; missouri state fair rules?????????????????	Augie
Re; mw piston kits question for engine builders	Augie
Re; open farm pulls in missouri	Augie
Re; pulling a mm rtu	Augie
Re; you'd be wrong	Augie
Sprayer tires	Augie
Thanks Joe	Augie
now I'm getting aggravated	Augie
old hard ones	Augie
you'd be wrong	Augie
Re; July tractor pulls in MI?	August 6th there's o
Re; Who has the Strongest 4010 Hot Farm????	Aunt Bertha to Uncle
Re; horseshoe bend ark. PULL	Aunt Esther's Favorite Ne
Re; Splined Hubs for JD	Austin99
1952 JD A	Austin
Louisiana Tractor Pull	Austin
NATPA in TX	Average puller
AC 180 First Time To Pull	Awesome Orange
Re; Shepherd, MI Maple Syrup Festival Pull????????	Awlkjref
Re; jefferson city tn fair pull	Awtractor@aol.com
Re; large engine	Aww my cub has more
Re; AXLE DIAMETER OF MODEL 77 OLIVER	Axel Rose
Re; Pulling hitch	Axlerod
Re; Farmall Super MD	Az tractor guy
Re; need carb help	B BARENIE
U-moline --- One piece head ||| cubic inch in head	B Barenie
HEY CHAD- ESPLAIN THIS	B ABRENIE
Re; copper head gasket	B ARENIE
Re; superm head on a 450 with firecraters?	B ARENIE
Re; sonny@bullet cams	B BARENEI
Re; More power for a Farmall M	B BARENIE/sm-53
CA+ NEED HELP	B BARENIE
CHADS EREHW ERA OUY	B BARENIE
CHADS OFFER AND THANK YOU	B BARENIE
CHADS- WITH A NEW VIEW !	B BARENIE
DCTOM	B BARENIE
EXCELLENT DISCUSSION	B BARENIE
Is there a cam grinder that gives a hoot !	B BARENIE
LW 110-112	B BARENIE
Moline 4206 head verses 4232	B BARENIE
Re; Family Tradition	B BARENIE
Re; 14.9x38's wanted	B BARENIE
Re; 15.5x38's	B BARENIE
Re; 16.9x34 tires	B BARENIE
Re; 2006 MMOGTA Antique Class Rules???	B BARENIE
Re; 4.25 MW IH pistons	B BARENIE
Re; 450 STROKER	B BARENIE
Re; 450 block	B BARENIE
Re; 450 gas c-281	B BARENIE
Re; 6.5 U Moline crank?	B BARENIE
Re; 806 gasser	B BARENIE
Re; ? for Moline builders	B BARENIE
Re; Almost old enoguh to pull	B BARENIE
Re; Aluminum tranny covers for IH M	B BARENIE
Re; BUICK@DEERE	B BARENIE
Re; CHAD/CHAD/CHAD	B BARENIE
Re; CHADS YOUR OUT	B BARENIE
Re; CHADS	B BARENIE
Re; CHADS EREHW ERA OUY	B BARENIE
Re; Cam Timing/Goldsburg	B BARENIE
Re; ChadS	B BARENIE
Re; Cracked head	B BARENIE
Re; Farmall 400 tune up	B BARENIE
Re; Farmall M pistons	B BARENIE
Re; Farmall M, what can I do ???	B BARENIE
Re; Farmall ring pinion info	B BARENIE
Re; First hook, now im hooked	B BARENIE
Re; G/MAN NEED OPINION ON A G BUILD-UP	B BARENIE
Re; H motor lack of power Help?????	B BARENIE
Re; HEY CHAD- ESPLAIN THIS	B BARENIE
Re; Hey Barenie,, cams,,,	B BARENIE
Re; Hey Wildman	B BARENIE
Re; IH 400 block just arrived!	B BARENIE
Re; M perfection/ moto-plex indoor pull] april 7-9	B BARENIE
Re; M pullin hitch	B BARENIE
Re; MM Puller	B BARENIE
Re; MOLINE 4232 Heads	B BARENIE
Re; MW Pistons	B BARENIE
Re; N.I.A.T.P.A. / SLED SHIPPING WEIGHT	B BARENIE
Re; Need to contact Bud Barenie!	B BARENIE
Re; New casted MM blocks,	B BARENIE
Re; Pinkpower	B BARENIE
Re; Piston clearence	B BARENIE
Re; Pistons for 400 block with no sleeves	B BARENIE
Re; RPM check?	B BARENIE
Re; Removing sleeves	B BARENIE
Re; STOCK RODS VERSES ALUMINUM CUSTOM RODS	B BARENIE
Re; Sleeve less M block	B BARENIE
Re; THANKS FOR REPLY'S BUT i HAVE A PROBLEM	B BARENIE
Re; Tips for A john deere	B BARENIE
Re; Top Cut Tires	B BARENIE
Re; Tractors not meeting the rules	B BARENIE
Re; U-moline --- One piece head ||| cubic inch in	B BARENIE
Re; Vinson manifolds for IH	B BARENIE
Re; Vintruies/BARN HEATER	B BARENIE
Re; Vintruies	B BARENIE
Re; Wanted	B BARENIE
Re; What to expect at Laotto -Spectator	B BARENIE
Re; You want out of line??? /HEY CHAD !	B BARENIE
Re; a lil political humor....	B BARENIE
Re; best way to stroke 88 oliver	B BARENIE
Re; block casting numbers	B BARENIE
Re; boring an m	B BARENIE
Re; chads---baker---lw	B BARENIE
Re; dennys carb shop	B BARENIE
Re; hard blocking!!!!!!/DREW !	B BARENIE
Re; how about a 14.9 on 12 rim	B BARENIE
Re; lp head	B BARENIE
Re; lw five star question/DCTOM/CHADS	B BARENIE
Re; m farmall in need of hp	B BARENIE
Re; manifolds heated vs unheated	B BARENIE
Re; moline 4207 heads ?	B BARENIE
Re; more hp out of m	B BARENIE
Re; need carb help	B BARENIE
Re; need tires	B BARENIE
Re; piston and sleeve kits	B BARENIE
Re; rocket govenors	B BARENIE
Re; stroking a jd 404 to a 466	B BARENIE
Re; super m	B BARENIE
Re; super m engine rebuild	B BARENIE
Re; super m horsepower question	B BARENIE
Re; t/ OSCAR MEYER	B BARENIE
Re; what kind of pistons should i use?	B BARENIE
Re;KP	B BARENIE
STOCK RODS VERSES ALUMINUM CUSTOM RODS	B BARENIE
family tradition/ what did you find out	B BARENIE
Re; Engine Build-Off;...Good Idea	B BAarenie
G/MAN NEED OPINION ON A G BUILD-UP	B Barenie
I got my foot in the 3-5-1 wisor !	B Barenie
Johnson Propane Manifold	B Barenie
L.W. I need some technical info.	B Barenie
OX -Blood Red verses Prairie Gold	B Barenie
Re; / paul	B Barenie
Re; 14.9x38 vs. 15.5x38	B Barenie
Re; 450 GAS HEAD	B Barenie
Re; 450 gas manifold	B Barenie
Re; B. Barenie	B Barenie
Re; Barenie,,	B Barenie
Re; Cam Timing/Goldsburg	B Barenie
Re; ChadS	B Barenie
Re; Drew-follow-up	B Barenie
Re; Farmall M sleeves	B Barenie
Re; GEARS	B Barenie
Re; Gasser Dieseling	B Barenie
Re; Got power-no traction	B Barenie
Re; HURRICANE	B Barenie
Re; I need some help!	B Barenie
Re; John Deere pullers rejoice!	B Barenie
Re; Johnson Propane Manifold	B Barenie
Re; M Farmall heads	B Barenie
Re; Merfield's # and RPM help	B Barenie
Re; Moline 4206 head verses 4232	B Barenie
Re; Need some info from the experts for farmall M	B Barenie
Re; Old Power Pride	B Barenie
Re; Power for 2nd gear/BUDD	B Barenie
Re; Power for 2nd gear	B Barenie
Re; Pulling down the track	B Barenie
Re; Selling my G. A few questions.	B Barenie
Re; Why do it???	B Barenie
Re; another M block question	B Barenie
Re; barenie,,,,	B Barenie
Re; boring an m	B Barenie

Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

Home | Manuals | Parts | 12-Volt Kits | Carburetors | Radiators | Engine Kits | Videos | Books Know someone interested in antique tractors? Tell them about this site! Your EMail Addr Your Name Friend's Email Friend's Name Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters

About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.