Subject	Posted By
Re; LP compression limits	Andy2
Re; MM UTS w/ lp intake	Andy2
Re; MM jug	Andy2
Re; MM piston size	Andy2
Re; Minnie Mo G Puller Question	Andy2
Re; Moline 9-bolt hubs? (UTS Splined)	Andy2
Re; Mopower action picture! M-M	Andy2
Re; OT, fuel economy, hauling tractors with 8V71 d	Andy2
Re; Tire swap wanted	Andy2
Re; UB Moline	Andy2
Re; Ultimate Tractor Hauler? (pic)	Andy2
Re; Which has more power? Propane or Gasoline?	Andy2
Re; Women Shiny Things	Andy2
Re; cam grinding with lower compression?	Andy2
Re; case 900 lp	Andy2
Re; found a red diamond truck engine.	Andy2
Re; hey mopower	Andy2
Re; need more hp	Andy2
Re; petronics coil...good valentine present for wi	Andy2
Re; pulls aug 20th in southern Mn or northern IA	Andy2
Re; tractor dies at the end of the track	Andy2
Re; ubu lpg	Andy2
anyone pull with summit tires??	Andy2
best rim width for 14.9X38	Andy2
cam grinding with lower compression?	Andy2
contact info for corcoran MN pull?	Andy2
firestone traction field and rd vs super all tract	Andy2
found a red diamond truck engine.	Andy2
how much air pressure 18.4X38 9000lb-10500 class?	Andy2
560 wheatland	Andy
A carb.	Andy
Co op tires	Andy
Comp ratio	Andy
Electronic Ing at NAPA	Andy
Fluid in tires	Andy
General tires good for pulling?	Andy
Governor help	Andy
H Framall Rods	Andy
How wide of rim for 16.9x38?	Andy
KBMO	Andy
MW dyno questions	Andy
Need help to ID head	Andy
Pistons	Andy
Pulling LP MM's	Andy
Pulls in Virginia	Andy
Stroker crank	Andy
Anyone pull GY dynatorques ?	Andy
C farmall rods	Andy
C rod need to know	Andy
ChadS	Andy
Firestone super all traction tires for pulling?	Andy
Hey Piston	Andy
JD A PULLER ?	Andy
Lexington Va. pull July 28	Andy
Looking for 18.4X30 tires	Andy
Pull at Virginia Horse center Wednesday	Andy
Re; 4500 lb. stock puller	Andy
Re; ? Chad s	Andy
Re; Another Princeton Picture	Andy
Re; Appropriate MM Carb setup?	Andy
Re; Betting someone here has the answer.	Andy
Re; COLUMBUS Ohio Easter weekend,Are You Going???	Andy
Re; Cockshutt....	Andy
Re; Cutting tires	Andy
Re; E-85 ethonal	Andy
Re; Hope a pic,,	Andy
Re; Is Motec still in business?	Andy
Re; JD 70 with Pertronix and MSD 6A help needed.	Andy
Re; JD G Stick It Or Not	Andy
Re; Jackson,MN tractor pull	Andy
Re; Lexington Va. pull July 28	Andy
Re; MOLINE -G- HEAD QUESTION	Andy
Re; Massey Harris Pullin'	Andy
Re; Moline GBDiesel weight loss?	Andy
Re; Need help to change governor to factory + 10%	Andy
Re; No oil pressure on WC	Andy
Re; Put a detroit 2-53 2-71 in a Farmall C???	Andy
Re; Re; Another Princeton Picture	Andy
Re; Re; C rod need to know	Andy
Re; Re; Looking for 18.4X30 tires	Andy
Re; Re; Re; Cockshutt....	Andy
Re; Re; Re; Cutting the fat off M-M R	Andy
Re; Re; Re; Jackson,MN tractor pull	Andy
Re; Re; Re; Re; Front Wts	Andy
Re; Re; Re; Re; Here we go again,,,,,,,,	Andy
Re; Re; Re; Re; Re; MOPOWER	Andy
Re; Re; Re; Re; Re; gasoline versus propane	Andy
Re; Re; Re; Re; gasoline versus propane	Andy
Re; Re; Re; Thought of the day.	Andy
Re; Re; Re; m parts	Andy
Re; Re; Re; which locktite is best?	Andy
Re; Re; The most common broken part	Andy
Re; Re; Thought of the day	Andy
Re; Re; which locktite is best?	Andy
Re; Rear Weights	Andy
Re; SURE DOES GET BORING WHEN I DONT POST	Andy
Re; Stroker Crank for H Farmall; Who Makes 'em?	Andy
Re; TRACTOR DILEMA	Andy
Re; Thought of the day.	Andy
Re; Thought of the day	Andy
Re; Timing a stroked motor	Andy
Re; WC cam	Andy
Re; What to take to a pull	Andy
Re; bite problem with new tires	Andy
Re; co-op tires vs firestone	Andy
Re; need help on tire size........	Andy
Re; need help with a G mm for pulling	Andy
Re; new paint vs no paint	Andy
Re; odd ball tires needed	Andy
Re; off topic Dodge V-10	Andy
Re; tips for a rookie please!!!	Andy
continentle 226 6cyl	Andy
dist advance	Andy
dyno and weight reduction	Andy
flatback	Andy
goose neck trailer	Andy
ing timing	Andy
need engine parts	Andy
please help identify 6cyl head	Andy
pull	Andy
pulls in Virginia	Andy
shaving head on wd allis	Andy
wd allis powered out in first gear after 70 ft	Andy
which locktite is best?	Andy
Tractor Pulls in Calif?	Andy
Tractor play day	Andy
Tractor weight	Andy
WC chasing its tail	Andy
What size tire	Andy
Tire cutting ?	AndyGuy
Re; Unstyled A more power	AndyinIL
Re; Hauling question	Andyt
Re; PULLS IN CONN.	Andyzinct.
Re; Arcola and LP	Aney2
Re; Tractor pulls in NY or Pa?	Angel
Re; tractor pull in clarence missouri	Angie kane
question on a web site	Angie kane
tractor pull in clarence missouri	Angie kane
tractor pull insurance needed?	Angie kane
Re; DCTom,	Angleiorn
Re; Re; Re; Re; Re; Pistons and Wrist Pins	Angleiorn
Re; WC Allis Re-Power	Angleiorn
Have 20.8 x 38 radials available	Angus
MM Pulling	Angus
MM uts pulling	Angus
Pressed Steel Centers	Angus
Pulling Centers	Angus
Re; 18.4-34 firestones	Angus
Re; Connecticut pulling clubs	Angus
Re; Have 20.8 x 38 radials available	Angus
Re; MM UTS Puller	Angus
Re; Re; Re; Re; Re; Re; straight pipe mufflers	Angus
Re; Re; Re; Re; straight pipe mufflers	Angus
Re; Re; straight pipe mufflers	Angus
Re; dead weight pull	Angus
Removable Wheelie Bars	Angus
Wheelie Bars	Angus
Width of rims	Angus
straight pipe mufflers	Angus
wheelie bars for a jd b	Angus
Iowa	Animal
Is it Krouthead or is it Memorex	Animal
King Case	Animal
Miss B Havin'	Animal
Miss B Havin	Animal
Re; Columbus, Nebraska pull...When???	Animal
Re; Columbus,Ne pull	Animal
Re; Hey Mikeee	Animal
Re; Hey Mikeeee	Animal
Re; How to get more HP out of MH 33??	Animal
Re; Iowa	Animal
Re; KING of HILL	Animal
Re; No tractor pull in Ogallala Ne. this year	Animal
Re; Old Power Pride	Animal
Re; Too Tuff Pull @ Columbus,Ne.	Animal
Re; Want to build a WC puller	Animal
Re; acwd45block	Animal
ot Miss B havin	Animal
440 CI Farmall M HP???	Anique Puller
Challenge of Power	Anna Thomas
Tractor Pullers are crazy	Anne
Re; Need Info on oliver 88 parts	Annie Seaberg
Re; WEIGHT CLASSES AT MARCH 14 NON SCANTIONED PUL	Annoyed
Dekalb Super Pull Div. 5 Turbo Class	Anon.
Re; 1066 puller	Anon
Re; 460 puller	Anon
Re; Farmall 460	Anon
Re; IH Engines	Anon
Re; Re; Re; Re; Re; High Performance Perkins Parts	Anon
cubic inches from Oliver	Anon
Re; Hersey MI Pull question???	Anonomous
Re; RULE CHANGES	Anonymous Puller
Re; Toughest Allis WC WD around	Anonymous2
Re; SEE THE GEORGIA PEECH IN ACTION	Anotehr bob
Re; fluid dampner for a 301 IH	Another 301
Re; 460 diesel	Another 460 puller
Re; MSD on Farmall 560	Another 560
Re; Tractors not meeting the rules	Another A Puller
Re; hiesler head and manifold not impressed	Another A
Re; JD OHC	Another B puller
tire size vs traction	Another Farmall puller
Re; G puller	Another G puller
Re; cockshutt 30 help	Another G puller
Re; Chad S H Pistons	Another H guy
Re; Inverness Pull	Another Indiana
vinson manifold ?	Another M puller
Re; Indiana Eagle New owner	Another Puller
Tunica MS pull	Another Puller
Re; Hey KBMO!!	Another Question
Re; Re; Re; Thought of the day.	Another Riddle says,
Re; Thought of the day.	Another Riddle...
Re; Interpret This Please	Another USAP Puller
Re; Re; Re; Re; Re; YELLAR MM	Another bystander
Re; Farmall 400 Cylinder head	Another farmall pull
Re; high alt pistons	Another farmallpuller
400 plus	Another green.
Re; USAP King of the Hill	Another green.
Re; oliver 77 motor swap	Another green.
WC in 6500 lb. class.	Another green.
Re; WC in 6500 lb. class.	Another green
Re; WANTED 13.6X24 TIRES AND RIMS	Another n Puller
Re; Aiken (SC) Farm Fest Tractor Pull last Saturda	Another puller
Re; Tunica MS pull	Another puller
Re; spark plugs	Another puller
Re; Tunica 2006	Another question?
? for smta puller	Another smta puller
Re; ? for smta puller	Another smta puller
Re; Co-op Tires	Another smta puller
Re; Re; Re; Re; Re; Re; Inverness,FL NATPA pull	Another supject
Re; KOM Pull at Portersville	Another viewer
Re; Moving pressed steel wheel centers NEED HELP	Anothertracotr
Directions to pull in Crossroads VA	Anothertractor
Hitch for AC WC	Anothertractor
How much compression is too much?	Anothertractor
In need of a puller under 2250 lbs...	Anothertractor
New guy with goosneck	Anothertractor
OT Dodge/ Cummins fuel problem	Anothertractor
Piston Source for WC Allis	Anothertractor
Re; 14.9 x 38 tires	Anothertractor
Re; 14.9x38's on 14 rims?	Anothertractor
Re; 88 wheels	Anothertractor
Re; Allis WD45 Starving For Fuel ?????	Anothertractor
Re; Directions to pull in Crossroads VA	Anothertractor
Re; Gear reduction starter for Ac Wc	Anothertractor
Re; How much compression is too much?	Anothertractor
Re; International suit case weights	Anothertractor
Re; OT Dodge/ Cummins fuel problem	Anothertractor
Re; Re; Re; Re; NATPA RULES	Anothertractor
Re; Re; Re; pressed steel for WC	Anothertractor
Re; Re; Re; tips for a rookie please!!!	Anothertractor
Re; Re; how wide should my tires be?	Anothertractor
Re; South Boston, VA pull???	Anothertractor
Re; Super 77 weight	Anothertractor
Re; cut 13.6 X 38 tires needed	Anothertractor
Re; from deere to allis	Anothertractor
Re; pull in Statesville,NC	Anothertractor
Re; pulling participation	Anothertractor
Re; to build a c or b farmall	Anothertractor
South Boston, VA pull???	Anothertractor
carburetor for my WC Allis	Anothertractor
electronic ignition for 77 Oliver	Anothertractor
how wide should my tires be?	Anothertractor
odd front tires	Anothertractor
pressed steel for WC	Anothertractor
tips for a rookie please!!!	Anothertractor
Re; LA case	Anotther case puller
Re; Why No Cubic Inch Limits In Antique Pulling?	Answer!
Re; BIG,BIG CUBIC INCHES	Answer101
Re; SMD box for 4 cylinder Moline	Answer2
Re; 16.9X38 FieldRoad	Answer
Re; 800 bolt pattern to U	Answer
Re; Lincoln County Missouri Pull July 13 15	Answer
Re; MM heads	Answer
Re; NATPA Engine Rule Question	Answer
Re; Oliver Super 88	Answer
Re; SMD box for 4 cylinder Moline	Answer
Re; Tractor Names	Answer
Re; deck plate	Answer
Re; gleaner combine engine	Answer
Re; oliver 310 help	Answer
Re; pulling tires	Answer
farmall h	Anthony dixon
Disk brake setup for oliver	Anthony
Re; jd r	Anti green
weight management !	Antiqer
Max I-H 450 power possible?	Antique Geek
Re; 4020 vs 1066	Antique Geek
Re; Re; Stock Shootout; Which Tractor is Best?	Antique New York Deu
Farmall M Questions	Antique Outlaw
Farmall M bore limits?????	Antique Puller
Farmall M-450 Heads	Antique Puller
Batesville, Arkansas Pull	Antique Puller
Pull at Altamont IL	Antique Puller
Re; Re; Re; GAS!!	Antique Puller
Wheelie bars??	Antique Puller
Antique's and Classic's Pull Together????	Antique and Classic
pulling events up date in va	Antique and graden pulls
merrill,wi	Antique pull
Re; 435 Deere puller	Antique puller in wi
14.9X 38 Titans	Antique puller

Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

Home | Manuals | Parts | 12-Volt Kits | Carburetors | Radiators | Engine Kits | Videos | Books Know someone interested in antique tractors? Tell them about this site! Your EMail Addr Your Name Friend's Email Friend's Name Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters

About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.