Subject	Posted By
Re; NATPA and M-M blocks	A.P.
Re; NEW PULLER	A.P.
Re; Naming a New Tractor (M-M 335)	A.P.
Re; New M-M GBD! Power ideas?	A.P.
Re; New classes, rules, suggestions?	A.P.
Re; Old power pride	A.P.
Re; Oliver 1900	A.P.
Re; Oliver 88 Open Class	A.P.
Re; Oliver 88 diesel	A.P.
Re; Oliver 88 wheels,,	A.P.
Re; Oliver Deisel Puller	A.P.
Re; Oliver Super 88 Industrial	A.P.
Re; Oliver Super 88	A.P.
Re; Oliver crank question	A.P.
Re; Oliver pullers	A.P.
Re; PERCENTAGE PULL FORMULA	A.P.
Re; Porting and polishing cyl head ports	A.P.
Re; Power for 2nd gear	A.P.
Re; Princeton Results ???	A.P.
Re; Question for NATPA pullers	A.P.
Re; Re; 600 case	A.P.
Re; Re; 77 rods	A.P.
Re; Re; 880 crankshaft	A.P.
Re; Re; A little Natpa history help please?	A.P.
Re; Re; Detroit shoot out	A.P.
Re; Re; NCIATPAI BANQUET	A.P.
Re; Re; Need to get a hold of Mike Genrich	A.P.
Re; Re; Oliver Deisel Puller	A.P.
Re; Re; Possible combos for div 5	A.P.
Re; Re; Re; 88 cylinder head questions	A.P.
Re; Re; Re; 1957 and older	A.P.
Re; Re; Re; 560 IH Transmission problems	A.P.
Re; Re; Re; A little Natpa history help please?	A.P.
Re; Re; Re; Correction to above post	A.P.
Re; Re; Re; Hopping up a 4-53 Detroit Diesel	A.P.
Re; Re; Re; Michigan Summer Pull Schedules for 200	A.P.
Re; Re; Re; Oliver Super 88 Industrial	A.P.
Re; Re; Re; Possible combos for div 5	A.P.
Re; Re; Re; Possible rule changes	A.P.
Re; Re; Re; Re; Possible combos for div 5	A.P.
Re; Re; Re; Re; Re; A little Natpa history help pl	A.P.
Re; Re; Re; Re; Re; Possible rule changes	A.P.
Re; Re; Re; Re; Re; Re; 1963 MF 97 MM 705	A.P.
Re; Re; Re; Re; Re; Re; Possible combos for div 5	A.P.
Re; Re; Re; Re; Re; Re; Re; A little Natpa history	A.P.
Re; Re; Re; Re; Re; Re; Re; Re; Re; A little Natpa	A.P.
Re; Re; Re; Re; Re; Re; Re; Re; Re; Re; Re; A litt	A.P.
Re; Re; Re; Re; Re; Re; Tunica	A.P.
Re; Re; Re; Re; Re; Re; dont bother	A.P.
Re; Re; Re; Re; Re; Re; pulling a 1900 gm diesel	A.P.
Re; Re; Re; Re; Under Pressure?	A.P.
Re; Re; Re; Tunica	A.P.
Re; Re; Re; dont bother	A.P.
Re; Re; Tunica KOH video	A.P.
Re; Re; Under Pressure?	A.P.
Re; Re; bigmotors	A.P.
Re; Re; lightening up an 88	A.P.
Re; SATPA Finale	A.P.
Re; Selling Bunch of Tires at Wauseon	A.P.
Re; Sigourney Results	A.P.
Re; Stock Shootout; Which Tractor is Best?	A.P.
Re; Sunday in Sandusky MI	A.P.
Re; Super 88 diesel on dyno	A.P.
Re; Super 88/880 Diesel weight/power tips	A.P.
Re; TURBO	A.P.
Re; Taking away the argument	A.P.
Re; Thanks ol Gray A	A.P.
Re; The Pulling World Loses Two Veteran Michigan Pullers thi	A.P.
Re; Transfer sled pull 10/09 at Leslie Mi.	A.P.
Re; Tunic Results	A.P.
Re; Tunica KOH video	A.P.
Re; Tunica Track Condition	A.P.
Re; USAP and NATPA rules	A.P.
Re; USAP?	A.P.
Re; Wanting to outpull a 995 Oliver GM	A.P.
Re; Waukesha mix/match engine stuff	A.P.
Re; What do you think?	A.P.
Re; Which gear?	A.P.
Re; Why Red vs. Green?	A.P.
Re; battery box-mounting on front??	A.P.
Re; best 6500-9500 6cyl Minni Mo	A.P.
Re; case 900 ( 1000 cubes) ??	A.P.
Re; cont. 427 in a 55 massey	A.P.
Re; cranks	A.P.
Re; detroit in massey	A.P.
Re; dont bother	A.P.
Re; engine swap out in 880	A.P.
Re; future for 460/560 IH in Div. 5	A.P.
Re; gingerich	A.P.
Re; header help	A.P.
Re; help building a oliver 310 gas	A.P.
Re; help with 88 pulling motor	A.P.
Re; hitts oliver 88	A.P.
Re; less weight=more or less power?	A.P.
Re; lightening up an 88	A.P.
Re; max820JDhorsepower	A.P.
Re; maximum bore using stock stroke	A.P.
Re; mh 555 or mf 97	A.P.
Re; michigan tractor pulls	A.P.
Re; motors that will drop in a 77	A.P.
Re; natpa div. 2 tire limits	A.P.
Re; off topic; How long will it take	A.P.
Re; oliver 2255	A.P.
Re; oliver 88 ports dont line up	A.P.
Re; pullers on EBAY	A.P.
Re; rd 501 ih truck motor in a 560	A.P.
Re; rd 501 in 560	A.P.
Re; super 88 needing more	A.P.
Re; super 88/880/1600 head differences	A.P.
Re; super99	A.P.
Re; the hook magazine?	A.P.
Re; truck motor in IH 460?	A.P.
Re; wakesha 310	A.P.
Re; waukesha 320 stroking	A.P.
Re; which farmall?	A.P.
Re; wiring instructions for MSD box	A.P.
Re; y not let them in..afraid???-for 720 Deere	A.P.
Tunica Track Suggestion	A.P.
USAP?	A.P.
bigmotors	A.P.
Re; 900 Case	A.p.
Re; Fowler, MI year-end blowout w/ money pull	A.p.
Re; can you put a 1850 motor in a 77 oliver	A.p.
Re; jerry's head, What divisons allowed?	A/cman
jerry's head, What divisons allowed?	A/cman
Re; Comal County Fair and Antique Tractor Pull	A1936deere
Re; The first Allison Powered Tractors	A1938jd
NFMS Tickets	A5020_puller
Re; Super pull in Columbus	A
Re; CHICKEN HOUSE TRACTOR	AAA
Re; kevlar clutch in a farmall m	AAC
Re; Deisel prices	ABC
Re; Schooler's parts	ABG
Re; CASE VAC	AC orange
Re; M puller	AC (Always been Craz
Re; Tooting my own horn..	AC (Always been Craz
Re; Largest Factory Production V-8	AC (HARD at work)
Re; Electric Fan Pusher or Puller ??	AC Boy
Re; Maximize the Fun! Ideas?	AC IS AN Idiot!
Re; Toughest Allis WC WD around	AC IS AN Idiot!
Re; 2008 Sigourney rules posted	AC Is An Idiot!
Re; Love The Threats!	AC Is An Idiot!
Re; My pulling buddy AC needs a gal!	AC Is An Idiot!
Re; best price on pertronix 1442?	AC Is An Idiot!
Re; custom wrist pins	AC Is An Idiot!
Re; new NTPA class	AC Is An Idiot!
Re; stock pulls becoming a joke	AC Is An Idiot!
Re; super m cam specs	AC Is An Idiot!
Re; the hook magazine	AC Is An Idiot!
Re; Allis Head	AC Is Voting For Oba
Re; wc pulling tractor	AC JD guy
Carb work	AC Orange
Front wheels WD45	AC Orange
Trans and rear end flush	AC Orange
Re; Possible combos for div 5	AC PULLER
Re; Rear Weights	AC PULLER
Re; wd 45 200hp????????????????????	AC PULLER
Lexington, Va. Pull 7/21/07	AC Puller
Re; To YT readers;;;;	AC Puller
Re; JD Crankshaft modification	AC Voted For Obama!
Re; Tires/Parts to NATPA Wauseon	AC Voted For Obama!
Re; stroked crank	AC Voted For Obama!
Re; stroked	AC Voted For Obama!
Re; OX -Blood Red verses Prairie Gold	AC WD45
Re; Good or Bad Idea	AC is an idiot!
Re; NIATPA; Goshen, Indiana Pull	AC is an idiot!
301 AC	AC man
Carb rebuild	AC orange
Front wheels WD 45	AC orange
Governor on WD45	AC orange
WC clutch	AC puller
Wheres the Div 5 pullers	AC puller
Re; Pull Show in Southern Iowa in June	AC(A Crybaby)
Re; Mapleton, MN tractor pull June 12th	AC(AlwaysCrying)
Re; Injector lasering	AC301
Considering pulling...Have Red vs Green questions...	AC
HEY CHADS	AC
How much does a good one cost	AC
Stock Moline U	AC
....And he said low compression???	AC
16.9 X 30 Tires	AC
16.9x38 Super All Tracs..opinions..?	AC
3/4 big enough for elec. water pump outlets ?	AC
4.25 MW IH pistons	AC
450 gas block head Q's	AC
60 Orchard reduction gear.	AC
??? on 7/1 Ionia Mich pull	AC
ANYONE ever go 6.5 stroke in a D17 block?	AC
AVOID THE WHOLE SITUATION	AC
Allis motors over 400 inches?	AC
Allis pullers / front aluminum wheels.. HELP!!	AC
Any Allis A or U pullers out there?	AC
Any good ideas about wheelie bars on round W4 axle	AC
Anyone have 12X38 pressed steel 4sale in MICH?	AC
Anyone have a set of Cunningham rods for an H for	AC
Anyone have trouble with brazed sleeves?	AC
Are Denny's IH M roller rockers really worth it?	AC
BUDD! Still need a JD flatback?	AC
Belarus.. (a what?).... pulling tractor	AC
CASEPOWER	AC
CO-OP Agri Masters	AC
ChadS!	AC
ChadS	AC
Champion 4130 plugs	AC
DATELINE; North of South Bend....	AC
Dead man throttle on a Farmall....	AC
Denny's Farmall distributers	AC
Directions to NIATPA pull in Mentone	AC
FINAL ANSWER YOU WANT	AC
Farmall H Rod length and Deck height..	AC
Goshen Ind. pull	AC
H.C. pistons for 350 Gas	AC
HEY BUDD!!!!!!!	AC
Hey Chads, where do they pull Hot Farm Stock aroun	AC
Hey Chads	AC
Highest HP from an Oliver 88 Diesel based motor	AC
How long should the horn blow?	AC
I.H. Carb Venturi questions..	AC
IH 6cyl build questions..	AC
In what case will tire size work against you?	AC
Is tonight South Bend?	AC
KENDAK	AC
Kevin Banet!	AC
Krouthead, this one is uglier than a Deutz!	AC
Looking for IH 6 cyl stroker crank	AC
MM 206 OVERHEAD valve rod length and deck height	AC
MW E52 hubs	AC
Max bore of a straight H block	AC
Mopower!	AC
Mounting tires with no tubes	AC
NCIATPA rules question	AC
NIATPA points banquet..	AC
NIATPA rule question	AC
North Central Indiana rule changes?	AC
OT SBC Circle track rods..alum vs steel	AC
Pertronix ignition question	AC
Pressed steel Allis WC rear end	AC
Q's about Princeton	AC
Re; Engine build off	AC
Re; Is a New Open Class a good idea..??	AC
Re; $ still have stroker stuff for allis 226	AC
Re; ....And he said low compression???	AC
Re; 13.6 38 tires	AC
Re; 16.9 X 38 and proper rim width	AC
Re; 16.9x38 Super All Tracs..opinions..?	AC
Re; 1941 Farmall H puller	AC
Re; 2008 Sigourney rules posted	AC
Re; 265 ci dodge motor	AC
Re; 270 CUBES IN C175 INFO NEEDED	AC
Re; 3 9 bolt hubs	AC
Re; 3/4 big enough for elec. water pump outlets ?	AC
Re; 300 heads	AC
Re; 3250 or less	AC
Re; 335 Small block MM maiden voyage	AC
Re; 350 Head Pistons	AC
Re; 4.25 MW IH pistons	AC
Re; 4.5 pistons	AC
Re; 45Degree or 23Degree Tires	AC
Re; 460 560 farmall	AC
Re; 460 is a coming	AC
Re; 460 sheet metal	AC
Re; 460	AC
Re; 5 Star General	AC
Re; 60 Orchard reduction gear.	AC
Re; 7inch stroke in farmall m	AC
Re; 8060 Head with Suffix DC I.H.	AC
Re; 9 Bolt Hubs For Allis 200	AC
Re; 9 Bolt Hubs for Farmall H-350	AC
Re; 9 bolt hubs	AC
Re; 9/1/07 Remus (WATA) Money Pull	AC
Re; 95 Year Old Puller	AC
Re; ? FOR CHAD.S OR ANY ONE THAT MAY KNOW	AC
Re; ?????? For ChadS or any other stroker engine b	AC
Re; A Puller's Night Before Christmas	AC
Re; AC Bring it to South Bend	AC
Re; AC about W-4 axle housings	AC
Re; AC camshaft	AC
Re; AC!!	AC
Re; AC,,, MENTONE. IN PULL	AC
Re; AC	AC
Re; AMERICA AT ITS BEST	AC
Re; AMISH Tractor Pull??	AC
Re; ANYONE ever go 6.5 stroke in a D17 block?	AC
Re; ATTN; ChadS, others with IHC 6-cylinders	AC
Re; Accident @ Wauseon	AC
Re; Alcohol in a JD A???	AC
Re; All 4 horses are turning a circle!	AC
Re; Allis Head	AC
Re; Allis motors over 400 inches?	AC
Re; Allis pullers / front aluminum wheels.. HELP!!	AC
Re; Aluminum parts for Farmall H	AC
Re; Aluminum tranny covers for IH M	AC
Re; Any Allis A or U pullers out there?	AC
Re; Anyone have 12X38 pressed steel 4sale in MICH?	AC
Re; Anyone have a set of Cunningham rods for an H	AC
Re; Armstrongs or Firestones?	AC
Re; Autolite plug #	AC
Re; BIG 5 STAR	AC
Re; BIG NUMBER	AC
Re; BUDD! Still need a JD flatback?	AC

Discount Prices for Parts! You can help support this extensive website by purchasing your tractor parts, manuals and merchandise from our [ Antique Tractor Store ] or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

Home | Manuals | Parts | 12-Volt Kits | Carburetors | Radiators | Engine Kits | Videos | Books Know someone interested in antique tractors? Tell them about this site! Your EMail Addr Your Name Friend's Email Friend's Name Copyright © 1997-2008 Yesterday's Tractor Co. - A Washington State Corporation All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters

About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.