Posted by tomstractorsandtoys1 on January 04, 2013 at 12:15:17 from (22.214.171.124):
In Reply to: plow question posted by jamo58 on January 04, 2013 at 09:59:57:
Have you tripped the bottom and checked out the roller assembly and the spring that is connected to it? We used to farm alot of rocks and would break a roller every year or two.Inspect the standard for wear they do wear at the top and then the roller flips out to easy.I do not recomend welding because if it is not right the bottom will not trip the next time you hit a rock.The shims you are asking for can be made,just find a bushing that fits over what is on the plow now and if nessary add a second over that.I would look for another standard off a junk plow.Try to find one from an area with few rocks like Iowa or IL.Years ago you could send your standard back to Deere to have it redone.Many dealers kept extras to exchange.If you are not worried about looks dad fixed his by welding a piece of steel onto the rear of the pivot assembly he attached a spring and eye bolt to this and put a piece of channel on top the plow backbone with a hole for the eyebolt.Tightening the spring applied more force down on the roller so he could adjust the trip pressure.Worked great but looked bad.
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.