Posted by JDKelly on October 18, 2012 at 13:36:56 from (18.104.22.168):
Hey guy's. I've got a 259 rake that I've been using for a little while. It works great but needs the usual like tires and paint. It has the rubber teeth but I thought about getting the clips and spring teeth as the rubber ones start to come apart. I REALLY don't want to try to cut one of those teeth with my JD square balers knives...
I'd like to disassemble, blast, and paint the thing to make it look new again. It seems the 259 is no-where near as common a rake as the 256 is. Other than the width and number of teeth I bet most parts are interchangeable.
One question I have is about the gearbox. This is probably the most expensive and maintenance specific part on this rake. Mine appears to be filled with grease. I thought they were supposed to be filled with oil. I think I remember reading somewhere that the oil is hard to keep in these gearboxes so most people go to just using grease to lube the gears. While it's apart I'll probably take the gearbox somewhat apart to check it out and could replace seals if I needed to as well as fill with oil if that is the preferred method.
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.