|
First of all, What is a Funk Conversion? The 9N, 2N
and 8N could be converted to run a six-cylinder or
an eight-cylinder Ford industrial engine. This conversion
was made possible by a company called "Funk Aviation"
(based in Coffeyville, Kansas). This is how the name
"Funk Conversion" came about.
Funk Aviation started making these kits available in 1943
for the six-cylinder conversion. From 1949 to 1950 they
had the kit available for the V-8 conversion. The
very last conversion made available was in 1952, it was
a valve-in-head straight six conversion.
Quite a few modifications are involved.
Just to give you an idea, here is a parts list of the components
that were available in the Funk Six-Cylinder Conversion Kit:
- Exhaust stack, pipe and muffler
- Case
- Rear engine plate
- Flywheel housing ring
- Timing gear cover
- Two transmission side brackets
- Two steering rod extensions
- Generator pulley
- Generator bracket
- Starter Bendix drive, starter housing and bearing, exchange armature
- Solenoid starter clamp
- Starter cable
- Radiator, radiator hoses
- Hood
|
There was another company that offered conversion kits, this
company was the "Glover Equipment Company" of Milford, Illinois.
The kits were very similar to the Funk Aviation kits.
All of the kits boosted the Ford 9N, 2N and 8N tractors up
from a two-bottom plow capacity to a three-bottom plow
capacity. The 8-cylinder Conversion Kit boosted the 8N up
to a whopping 100 horsepower!
Conversion kits are still being offered today. I'm pretty
sure that they are no longer being made by "Funk Avaiation"
or the "Glover Equipment Company" but I've heard that there
are a few different companies that have them available. I
personally only know of one. Last I heard the V-8 Conversion
Kit was $850.00 plus shipping. It could be more or less,
the address below is provided for you to perform your own
research on the matter. I've never bought a kit, so I can't
give testimony on the quality of the kit or the company:
R. L. Stauffer, Inc.
7780 S. US 27
Portland, IN 47371
They can also be reached via e-mail at stauffer@jayco.net
There are some pictures available of some conversions we have
run across on the Pictures page.
| 