Unlikely that the non-return valves will stick unless the system has water in it and they will rust or the springs rust and break. The Control Valve can stick when it is worn if you do park the tractor with a load on the 3 point and with the Engine stopped. When the Engine is running the Control Valve is rocked from side to side in an effort to prevent sticking. While there shouldn't be a load on the control valve because of the non-return valves (8 of them) holding the pressure, if these get worn, as they do, there will be some pressure leaking and that will hold the Control Valve. Why park with the 3 point in the raised position anyway, it can be dangerous should someone move the Control Levers (children?)and the implement will crash down.The hydraulics were never designed to hold up indefinitely as there is no need for this. The leak-down you get when you do park it with the implement raised is from various parts of the system and it is just wear and tear, but when the Pump is running it will be more than capable of taking care of small leaks like that. Usual places to leak are the Lift Cylinder and the non-return valves and the Control Valve in the Pump. There is nothing to prevent you parking the tractor with an implement attached in the raised position, but if the Control Valve sticks, it doesn't always free-off very easily, so the easy way is to lower the 3 point when you park the tractor. I have attached some pictures of the Control Valve and the Non-return valves(12-17)..the vertical "lines" on the control valve are washer or spacers that separate the different pressures in the Pump, these do wear with the continual sliding action of the Control Valve, so the holes get bigger and allow pressure to leak. These valves are a precision fit but do wear over time and dirty oil definitely does not help. It does say that you should always lower the 3 point when parking in some versions of the operators manuals. Why don't you like the idea of lowering the 3 point each time, it would be interesting to read your view on this....John(UK)....fergusontractors@hotmail.com
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
