|
Support YT
Subscribe Today!
|
|
This is a moderated discussion board.
| No Advertising of any kind is allowed here. This includes For-Sale and Wanted-To-Buy items. Use the classified ads page for that. |
Use Mutli-Page Board for Faster Loading
- Farmall A gasket material - bkpigs 20:09:11 02/03/12
(0)
- Hi Lo trans on Farmall 140 - Jay563 19:17:16 02/03/12
(1)
- New Case-IH, Buy New A or Used JX or CX ???? - couv 18:21:20 02/03/12
(0)
- MPG - Jim Paterson 17:36:37 02/03/12
(2)
- Re: MPG - gtski 18:23:29 02/03/12
(0)
- Re: MPG - CNKS 17:44:43 02/03/12
(0)
- A clutch drive shaft disc washers - cheif 17:18:41 02/03/12
(1)
- H not starting - John V. 17:08:18 02/03/12
(5)
- IH 300 Starting Problem - Ernrod 16:55:24 02/03/12
(3)
- Info needed for Model R sidedraft carburetor for 22-36 - Roland Phillips 16:42:24 02/03/12
(0)
- what will it bring??? - glennster 16:10:20 02/03/12
(8)
- pulley for ai 23 mower - john895 16:08:51 02/03/12
(0)
- water pump leak - dcpky 15:33:22 02/03/12
(2)
- oil dip stick...super C - lil mac 14:00:11 02/03/12
(5)
- superCfront frame wgts - lil mac 13:52:14 02/03/12
(0)
- Follow up M not charging - Ellis Kinney 13:29:21 02/03/12
(4)
- Update on Farmall H Steering Post dent - Yooper Farmall 11:12:57 02/03/12
(3)
- B414 tractor - how do I advance the timing? - fort steele tractors 11:04:13 02/03/12
(1)
- Farmall 100 Transmission - John Roderick 11:02:37 02/03/12
(1)
- Cleaning the M questions - BigTone 06:35:54 02/03/12
(17)
- IH winter convention, Iowa - Craig Tenhoff 05:31:49 02/03/12
(17)
- Re: IH winter convention, Iowa - sflem849 18:22:45 02/03/12
(0)
- Re: IH winter convention, Iowa - W.Brehm 18:02:26 02/03/12
(0)
- Re: IH winter convention, Iowa - david G 17:11:32 02/03/12
(0)
- Re: IH winter convention, Iowa - rustyfarmall 14:42:58 02/03/12
(0)
- Re: IH winter convention, Iowa - lil mac 13:47:02 02/03/12
(0)
- Re: IH winter convention, Iowa - Old-F20 13:06:46 02/03/12
(0)
- Re: IH winter convention, Iowa - W.Brehm 10:39:20 02/03/12
(0)
- Re: IH winter convention, Iowa - sflem849 10:18:16 02/03/12
(1)
- Re: IH winter convention, Iowa - Craig Tenhoff 09:50:35 02/03/12
(0)
- Re: IH winter convention, Iowa - W.Brehm 09:40:44 02/03/12
(0)
- Re: IH winter convention, Iowa - Old-F20 08:15:20 02/03/12
(0)
- Re: IH winter convention, Iowa - rustyfarmall 07:02:52 02/03/12
(0)
- Re: IH winter convention, Iowa - sflem849 07:01:34 02/03/12
(0)
- Re: IH winter convention, Iowa - Don R of MN 06:49:59 02/03/12
(0)
- Re: IH winter convention, Iowa - rustyfarmall 06:11:38 02/03/12
(0)
- Re: IH winter convention, Iowa - sflem849 06:06:41 02/03/12
(0)
- 756D Questions - flhr62 02:50:06 02/03/12
(4)
- 350 Farmall Questions - 1sarge 20:10:14 02/02/12
(8)
- F20/Regular steering post - GNP Fatboy 18:09:39 02/02/12
(9)
- 1020 - gcnehring 17:32:47 02/02/12
(2)
- Re: 1020 - robgIN 18:41:57 02/02/12
(0)
- Re: 1020 - rustred 18:05:48 02/02/12
(0)
- td-6 - john in pennsylvania 17:16:29 02/02/12
(2)
- Re: td-6 - dej(Jed) 10:55:45 02/03/12
(0)
- Re: td-6 - Fritz Maurer 19:46:53 02/02/12
(0)
- Starting problem - 53 super H 16:56:31 02/02/12
(7)
- 560 t/a - dundeeaj 16:42:43 02/02/12
(1)
- M not charging. - Ellis Kinney 16:33:17 02/02/12
(14)
- Farmall Serial Number - Austin G 16:08:14 02/02/12
(4)
- Farmall 400 dash colour - 1468 Chris 15:56:45 02/02/12
(3)
- farmall 400 - ray hogg 15:38:19 02/02/12
(6)
- T-6 series 61 crawler - Mike Lauer 14:24:05 02/02/12
(2)
- A water temp guage - cheif 14:07:29 02/02/12
(2)
- b250 pinion depth measurment - inter25079 13:49:18 02/02/12
(0)
- 32 inch tires - molinegb 13:03:51 02/02/12
(3)
- D282 or D310 - BigBob706 12:44:31 02/02/12
(1)
- ignition wiring - nathan winterowd 11:58:36 02/02/12
(4)
- Need help finding a discontinued part - achodges1 11:09:51 02/02/12
(9)
- Double Venturi - 1949H 10:47:28 02/02/12
(1)
- 424 3 pt hitch - Dave in Southern IL 10:35:53 02/02/12
(2)
- Old A model - BoonvilleKid 09:57:20 02/02/12
(4)
- 460 running too rich - NolanJae 08:52:24 02/02/12
(4)
- Need to sell due to health reasons. - Red Mud 08:23:00 02/02/12
(13)
- T-20 parts tractor. - Dandy Dave 08:11:55 02/02/12
(4)
- Farmall Bolts - schultz 05:09:17 02/02/12
(14)
- 1 Millionth Farmall M photos/info?? Anybody have a good one? - Mike1972chev 04:17:24 02/02/12
(12)
- Cost to ship tires - Rex Simpkins 03:33:29 02/02/12
(8)
- Model of spark plug for IHC B414 tractor - fort steele tractors 21:17:34 02/01/12
(1)
- omg i thought i've seen it all - unbelievable to me 19:35:26 02/01/12
(9)
- super h frame hole plugs - ajdeereman 19:22:37 02/01/12
(10)
- F14 fenders - DGK 18:55:53 02/01/12
(1)
- Re: fast hitch gauge - Chester5731 18:26:58 02/01/12
(0)
- Mr. Terminator - Rick Remmert 17:54:46 02/01/12
(8)
- Jan's Plastigage - Rick Remmert 17:30:04 02/01/12
(7)
- cracked head - Ole Man 17:18:58 02/01/12
(3)
- front wheel dust shield for F20 - Mike Dau 16:01:07 02/01/12
(4)
- 856 MCV pump ? - jd720 15:38:24 02/01/12
(0)
- farmall m or fordson major - montanakid1992 15:00:35 02/01/12
(14)
- Rude awakening with my 1206 - LarryT 11:50:25 02/01/12
(6)
- lockwasher - Jim Isler 11:01:38 02/01/12
(7)
- 856 loader - flhr62 09:02:54 02/01/12
(2)
- Sand in Air Cleaner - WI Dave 08:52:05 02/01/12
(11)
- needle seat for 48' H - TuckerMac 07:48:38 02/01/12
(5)
- Farmall H front end knocks - Yooper Farmall 07:48:14 02/01/12
(5)
- H Steel Wheels - primerk5 06:44:19 02/01/12
(7)
- 9 Bolt hubs - Dudley Brand 05:11:53 02/01/12
(0)
- 1086 Engine Labors When Steering - TMatt 04:48:43 02/01/12
(3)
- H belly pump - Chester5731 19:59:22 01/31/12
(1)
- !957 IH 350 utility diesel. - Fierce Sparrow 19:36:10 01/31/12
(0)
- OEM style coil - Paul in SC 18:21:53 01/31/12
(6)
- T 4 low profile international crawler - twomanycases 17:05:56 01/31/12
(6)
- Oh but what could've been..... - BOBM25 17:05:40 01/31/12
(19)
- Demonstrator - Farmalldan 16:36:19 01/31/12
(9)
- Super C was running-not now - MarkinMo2 16:22:02 01/31/12
(7)
- Farmall 300/350 Help - 1sarge 15:54:50 01/31/12
(14)
- 140 2 point hitch? - Doyle S. 15:18:44 01/31/12
(10)
- Rod bolt lockwasher - Jim Isler 14:09:02 01/31/12
(15)
- dennys carb shop - rusty faubion 13:47:45 01/31/12
(14)
- float level H - Tuckermac 10:43:09 01/31/12
(5)
- tractors for sale - truckerlary 10:30:10 01/31/12
(2)
- 3 PT HITCH LOWERS ONLY HALF WAY DOWN - MIKE JOHNS/4runner 08:35:57 01/31/12
(1)
- Plastigage use - Jim Isler 08:18:27 01/31/12
(8)
- hydraulics-- h and m - Finnbair2020 06:10:49 01/31/12
(7)
- H carb DC or DB - Tuckermac 05:32:02 01/31/12
(3)
- 856 Advise please. - flhr62 02:57:54 01/31/12
(10)
- Small gas starting tank - AL Moyer 20:49:24 01/30/12
(8)
- Cub 154 low boy - Brian Stockmaster 20:25:40 01/30/12
(3)
- OOPS!! maked a misnake - timis 19:28:44 01/30/12
(4)
- Super H's - IHFORDFARMER 18:31:03 01/30/12
(4)
- Engine Kits - Elvin Frank 18:04:39 01/30/12
(3)
- B250 Light Switches - Darren Schwarz 17:16:19 01/30/12
(1)
- removing grill screen - brian456 17:02:56 01/30/12
(2)
- Problem with 340 IH Utility - Gas - John Ratu 16:15:30 01/30/12
(4)
- Farmall H Carburetor Question - 68rs327 15:29:51 01/30/12
(8)
- What do i need to switch from a 360 to a 466? - kennell 13:32:28 01/30/12
(3)
- 2 Point 3 Point For 460 - Lmack 13:30:35 01/30/12
(0)
- Hey, souNdguy - Wardner 12:41:20 01/30/12
(0)
- German Dielsel 756 - Mark W. 10:12:15 01/30/12
(7)
- Farmall A steering - caissie 09:45:08 01/30/12
(8)
- S/M Belt pulley Shaft - S/C Bob 09:11:05 01/30/12
(0)
- o3132 moldboard - chuck massart 08:53:13 01/30/12
(3)
- 1586 ?'s - timis 08:42:11 01/30/12
(4)
- 400 TA help - 1468 Chris 08:39:28 01/30/12
(3)
- New Demonstrator - Farmalldan 07:19:16 01/30/12
(9)
- Super MVD high crop First one I have EVER saw! - Mike1972chev 07:18:17 01/30/12
(29)
- Potato Digger - James Williams 06:36:41 01/30/12
(3)
- Slow gears - Mike Lumley 06:01:10 01/30/12
(8)
- D301 Pistons - newhpuller 03:02:17 01/30/12
(1)
- farmall M - geezer in mo 02:23:58 01/30/12
(15)
- Farmall A Rear Tires - Drew W. 20:44:51 01/29/12
(8)
- New Deminstrator - farmalldan 19:40:46 01/29/12
(3)
- h starter rebuild pointers. - primerk5 18:53:33 01/29/12
(16)
- Rocker shaft oil journal - sven 17:50:04 01/29/12
(6)
- 404 gearbox niose - int40459 17:34:24 01/29/12
(0)
- cast iron toy.. - dennis min 17:04:40 01/29/12
(0)
- Farmall H Distributor Question - 68rs327 16:12:49 01/29/12
(14)
- H running again - david G 16:11:09 01/29/12
(1)
- farmall h - tractornutjd 15:08:53 01/29/12
(5)
- hydraulics - Finnbair2020 14:08:36 01/29/12
(4)
- HELP!! NEED PICTURES 200 FARMALL - TIMAR 13:36:59 01/29/12
(4)
- Farmall MD manifold - FarmallNL 12:16:56 01/29/12
(4)
- Farmall M brake Problem - John 37A 10:48:54 01/29/12
(2)
- Looking for a steering arm 340U - redFarmallboy 08:15:50 01/29/12
(1)
- MD sleeves - oldiron29 06:25:25 01/29/12
(2)
- H starves for fuel ? - tuckermac 06:07:33 01/29/12
(12)
- 806 wheatland front wheel hubs - SkiDoojunky 04:39:33 01/29/12
(6)
- B Cultivator Value - KerryM 20:05:22 01/28/12
(6)
- Question regarding serial number of 350 - Brendon-KS 18:59:15 01/28/12
(2)
- farmall deminsrator - farmalldan 18:21:27 01/28/12
(5)
- 1953 louisville super m - jim warehime 18:02:42 01/28/12
(13)
- Farmall 200 Rebuild - Workman 16:40:54 01/28/12
(3)
- Super C overhaul - Rick Remmert 16:17:56 01/28/12
(6)
- 1954 Farmalls - plow hand 16:04:47 01/28/12
(20)
- Magneto timing, rotor position vs. tower - Hendrik 14:51:21 01/28/12
(7)
- What should I expect from my A - Machine249 13:35:25 01/28/12
(11)
- Just wanted to thank everyone who helped - BigTone 12:51:17 01/28/12
(2)
- Looking for rear weights - Rex Simpkins 10:56:31 01/28/12
(2)
- Steering Much Tighter Now, plus Question - 400D - 400D Guy 10:38:56 01/28/12
(1)
- brake shaft seals - west alton river rat 10:28:31 01/28/12
(5)
- Options? - strikefalcon 09:59:03 01/28/12
(1)
- farmall super m - jim warehime 09:52:11 01/28/12
(2)
- Farmall M tug? - JoeWil 06:40:38 01/28/12
(10)
- 606 burning out glow plugs - Pete Seven 06:30:47 01/28/12
(2)
- govener rebuild - bodyman1 06:03:28 01/28/12
(1)
- grill bolts - Bill Bowen 05:34:36 01/28/12
(4)
- McCormick Deering W40 Manifold - Matt Rhoades 21:45:38 01/27/12
(1)
- Light switch wiring help needed. 4 position switch - Tony_Idaho 19:02:52 01/27/12
(4)
- CANNOT seem to get away from IH whatever I do !!! :) - Mike1972chev 18:21:12 01/27/12
(5)
- 501 rd motor ? - lmbky 17:58:22 01/27/12
(3)
- F-20 valves - Adam Simcock 17:55:54 01/27/12
(10)
- My 966 - 870blackknight 16:49:59 01/27/12
(14)
- Ever Seen a Tractor Like This? - 68rs327 16:36:25 01/27/12
(18)
- Demonstrator - Farmalldan 16:23:50 01/27/12
(7)
- Super FC - Farmalldan 16:19:33 01/27/12
(1)
- gaskets for an A - charlie M 15:01:56 01/27/12
(4)
- International 330 Utility parts needed - Bryton K. 13:54:16 01/27/12
(1)
- Potato Digger - James Williams 13:28:02 01/27/12
(6)
- 1946 international M - Daniel Wrich 12:11:59 01/27/12
(3)
- Super A Cultivator Set Up Help! - ColoradoNic 11:55:39 01/27/12
(19)
- 1930's Grist Mill - jdeereg 10:10:44 01/27/12
(4)
- Farmall H engine block - Bob Bancroft 10:02:28 01/27/12
(2)
- International 464 Gas - Briar Hill Brittanys 09:58:41 01/27/12
(2)
- TD6 Orchard Crawler - Bob in Mi. 06:46:04 01/27/12
(1)
- Farmall 450 Gas Parking Brake installation - Tony_Idaho 06:22:21 01/27/12
(2)
- W-9/WD-9 series engine parts rarity/scarcity???Why is th... - Mike1972chev 06:07:39 01/27/12
(19)
- Front wheel weights - freefour 05:56:45 01/27/12
(3)
- bolt lengths for 1st set of weighs on 385 - Rex Simpkins 04:02:30 01/27/12
(0)
- Fast hitch will not go down - redgems 03:40:06 01/27/12
(2)
- Fender questions - Fullers Farmalls 22:58:38 01/26/12
(5)
- FFA Tractor Restoration - JT's RandR 20:34:06 01/26/12
(17)
- Just got McCormick Deering 15-30 / 22-36 ? - Coyote Green 20:29:36 01/26/12
(6)
- cotton picker numbers - rustcollector 20:28:46 01/26/12
(1)
- 484 Pto squeels when engaged - 40204320bill 19:20:41 01/26/12
(7)
- WD-9 Engine s/n versus tractor s/n - sflem849 19:12:37 01/26/12
(7)
- Farmall H Help - mattlans 18:54:24 01/26/12
(3)
- sickle bar mower for a/sa fit c? - soundguy 18:11:25 01/26/12
(9)
- tire size on a 574 - Kevin Roberts 18:01:22 01/26/12
(8)
- 650 Diesel smoking - plow hand 17:44:39 01/26/12
(5)
- 966 serial # - 870blackknight 17:24:30 01/26/12
(2)
- International 330 Utility wiring diagram - Bryton K. 16:11:46 01/26/12
(3)
- How to remove starting ratchet [hand crank] - j hakenwerth 15:16:24 01/26/12
(4)
- Need Head Studs for 400D - 400D Guy 14:56:23 01/26/12
(7)
- Rustedredacre oil pressure gauge F-20 - oldiron29 14:52:54 01/26/12
(4)
- Torque specs - oldtanker 13:54:38 01/26/12
(1)
- 504D fuel leak - dahlia21122 13:23:48 01/26/12
(2)
- Int 444 parts - Raltn 12:58:16 01/26/12
(1)
- Firecrator super c piston sleeves fit in a a - Onedeere37 12:23:21 01/26/12
(4)
- 1958 Farmall 230 C-123 Crank pulley timing marks - Bryan P 12:23:10 01/26/12
(1)
- MW Hand Clutch - jim warehime 11:57:26 01/26/12
(4)
- IH Model 37 Square Baler - biggerred 11:23:29 01/26/12
(2)
- Looking for a 10-20 titan - Tractorgeek 10:01:34 01/26/12
(3)
- Don't shoot me - Goodman 09:16:30 01/26/12
(24)
- Farmall H cam - David Terry 04:55:33 01/26/12
(6)
- Farmall H cam - David Terry 04:53:47 01/26/12
(0)
- New Website for chapter 32 Red Power Roundup - Nebraska Cowman 04:49:27 01/26/12
(0)
- Cub Question(s) - John M 03:07:06 01/26/12
(13)
- Wedge-lock wheels revisited-success!(pics) - DeltaRed 21:24:53 01/25/12
(4)
- jdntn are you out there? - jeffkoh 19:52:35 01/25/12
(3)
- farmall bn - Todd Heck 19:31:09 01/25/12
(5)
- You think he will sell this? - W.Brehm 18:53:38 01/25/12
(11)
- Farmall H and M Carbs - Walton Daines 18:39:19 01/25/12
(5)
- hydraulic illustration - Jim Paterson 18:38:23 01/25/12
(4)
- Belly pump hydraulic lines - Jim Paterson 18:35:58 01/25/12
(6)
- First Tractor Mounted Cotton Pickers - Lmack 17:33:50 01/25/12
(4)
- Belt Pulley Drive - TV Iron 17:24:04 01/25/12
(2)
- The WD-9 Saga Continues - sflem849 15:48:26 01/25/12
(9)
- McCormick Deering #62 Combine - TW Hertel 15:46:59 01/25/12
(2)
- ih 300 utility power steering - my5sons 14:24:12 01/25/12
(1)
- Delco 6V Generator Inside Wiring - KerryM 13:51:26 01/25/12
(3)
- Farmall H with Sickle Mower - pgarrett 12:53:21 01/25/12
(6)
- Norden wide front, whats it worth - Jason Rasmussen 11:24:47 01/25/12
(7)
- 650 injector pre cup - plow hand 09:24:17 01/25/12
(2)
- Soundguy - James Williams 06:56:00 01/25/12
(1)
- Super MD, removing frame rails - Dalrymple 06:38:31 01/25/12
(12)
- Re: Super MD, removing frame rails - Dalrymple 12:27:18 01/25/12
(0)
- Re: Super MD, removing frame rails - jim warehime 11:31:36 01/25/12
(0)
- Re: Super MD, removing frame rails - knoxcityfarmboy 11:13:21 01/25/12
(0)
- Re: Super MD, removing frame rails - Bob M 11:09:35 01/25/12
(0)
- Re: Super MD, removing frame rails - Dalrymple 09:49:35 01/25/12
(0)
- Re: Super MD, removing frame rails - sflem849 08:58:40 01/25/12
(0)
- Re: Super MD, removing frame rails - randy hall 08:38:54 01/25/12
(0)
- Re: Super MD, removing frame rails - Ellis Kinney 08:35:57 01/25/12
(0)
- Re: Super MD, removing frame rails - Bob M 08:30:13 01/25/12
(0)
- Re: Super MD, removing frame rails - Dalrymple 08:10:49 01/25/12
(0)
- Re: Super MD, removing frame rails - Janicholson 06:57:47 01/25/12
(0)
- Re: Super MD, removing frame rails - rustyfarmall 06:58:34 01/25/12
(0)
- brake locking assembly - Bill Bowen 05:48:59 01/25/12
(2)
- That used tach drive - $202.50 - Wardner 21:16:21 01/24/12
(7)
- 706 Diesel Rod Bolts - Craig7241 20:28:35 01/24/12
(2)
- Cotton Pickers - rustcollector 20:23:56 01/24/12
(10)
- Cotton Pickers - rustcollector 20:22:52 01/24/12
(0)
- Super A drawbar - freefour 19:35:03 01/24/12
(5)
- H spindle seals - Senator 19:06:13 01/24/12
(5)
- H clutch - chester5731 18:41:13 01/24/12
(8)
- Soundguy - James Williams 18:39:58 01/24/12
(1)
- farmall 400 light wiring and tach question - Ryan400 17:24:57 01/24/12
(4)
- what is this thing??? - 460anger 16:27:03 01/24/12
(14)
- H 12 volt conversion - Jim Paterson 16:08:52 01/24/12
(12)
- M/Super M Gear Shift Lever - Eric Hartman 15:56:01 01/24/12
(7)
- Super M shift lever - CNKS 14:30:08 01/24/12
(4)
- Belly pump hydraulic lines - Jim Paterson 10:39:04 01/24/12
(8)
- Farmall 450 Gas Brake issue - Tony_Idaho 10:03:26 01/24/12
(13)
- anyone in central fl interested in a C and Cub? - soundguy 09:06:20 01/24/12
(16)
- 650 Injector seals - plow hand 08:41:37 01/24/12
(7)
- Anyone with a Farmall 240 F/H Swinging Drawbar???? - farmallhal 07:46:55 01/24/12
(1)
- 240 Farmall hydralics - BBinOK 06:41:31 01/24/12
(3)
- Oil Reservoir Question - bordermen 05:37:29 01/24/12
(5)
- Putting duals on 400/450 - CenTex Farmall 19:30:18 01/23/12
(8)
- finally started burning rods on the C 3pt - soundguy 19:00:22 01/23/12
(32)
- Super C overhaul - Rick Remmert 17:52:38 01/23/12
(5)
- H steering post -- Yooper - Wardner 16:49:34 01/23/12
(1)
- ---- FARMALL H Serial # Question ------- HELP - mjd3 16:36:29 01/23/12
(10)
- caseIH Catalog. - Kevin B from Illinois 16:36:12 01/23/12
(0)
- 666 Hydro - 53H 15:32:57 01/23/12
(3)
- 666 Hydro - RDC 15:24:34 01/23/12
(0)
- Fluid for transmission - Jim Paterson 15:22:08 01/23/12
(8)
- Generator belt on H - AF 70 14:27:53 01/23/12
(3)
- farmall 400 - Ryan400 14:00:58 01/23/12
(6)
- F-20 electric battery box - oldiron29 13:24:53 01/23/12
(20)
- Super C hydraulic hoses - J.D.HEICHEL 13:03:46 01/23/12
(5)
- H trans - Chester5731 12:09:56 01/23/12
(2)
- Farmall 300 - Midnight51 11:49:51 01/23/12
(3)
- Metal in bottom of H transmission - backwater 11:00:40 01/23/12
(9)
- torque setting for head bolts on a SC - kennell 10:14:54 01/23/12
(2)
- Cub Crank pully - Travis Troxell 09:17:17 01/23/12
(2)
- What is the name and function of this collar on an H? - Zachary Hoyt 18:51:04 01/22/12
(8)
- M idle metering jet - jdntn 18:45:47 01/22/12
(2)
- Farmall m is a professional starter button burner upper - Aaron Spears 17:59:15 01/22/12
(15)
- IH wrench - jsmall576 17:22:36 01/22/12
(1)
- Need help with Lift-All pump removal. - lbg57 16:32:50 01/22/12
(7)
- series 1 series 2 - ajdeereman 16:05:21 01/22/12
(7)
- MW hand clutch - walt d 15:53:56 01/22/12
(9)
- farmall 230 brakes - nl00sb 14:55:02 01/22/12
(7)
- Alternator is working at last - Zachary Hoyt 13:58:58 01/22/12
(2)
- 350 Utility problems??? - AL CT 13:54:49 01/22/12
(4)
- IH 504 hydraulic issues. - Andrew Psencik 13:43:00 01/22/12
(5)
- Good Day! - DK44H 11:45:50 01/22/12
(5)
- radiator support rods - WOpp 10:31:21 01/22/12
(5)
- International 460 oil filter - Keith823 08:54:26 01/22/12
(2)
- M farmall starter - jrv1102 08:32:49 01/22/12
(2)
- Farmall H Steering Post Dent - Yooper Farmall 08:24:56 01/22/12
(10)
- Torque specs for headbolts Farmall M - Willie W 08:18:04 01/22/12
(2)
- super H farmall - rick deere 08:13:55 01/22/12
(18)
- Farmall F12 part - Mike Farmer 04:00:24 01/22/12
(13)
- Hey KarlF - DeltaRed 21:59:30 01/21/12
(4)
- WD-9 SWD-9 Belt pulley gearbox weight.. - plow hand 19:49:34 01/21/12
(1)
- Wedge-Lock wheels - DeltaRed 19:47:08 01/21/12
(2)
- WD-9 Belt Drive Shaft Seal - WD9ER 19:06:01 01/21/12
(9)
- 1955 300u Hydraulic pump noise and slow moving cylinders - windhillfarmer 18:03:09 01/21/12
(3)
- cub shift fork - Chief 83 17:14:56 01/21/12
(2)
- W9 fenders - jim in MT 16:24:33 01/21/12
(11)
- 51 H Transmission Metal Chunks - backwater 16:00:22 01/21/12
(11)
- Hyd lines on 460 diesel - CIH9280 15:51:15 01/21/12
(3)
- Hydro 70 Question - rustyacresnd 15:35:38 01/21/12
(4)
- cumulative update pics on the H - soundguy 13:51:12 01/21/12
(35)
- started fabbing up the 3pt on the C today. - soundguy 13:39:29 01/21/12
(6)
- $25 may have saved my 100's - bkpigs 13:29:20 01/21/12
(3)
- 300 international utility power steering - GLB 13:25:02 01/21/12
(0)
- electrical trouble - Ed Hotaling 13:05:26 01/21/12
(7)
- early IH wide fronts - PaulGinMN 12:46:42 01/21/12
(1)
- Farmall H with Freeman Loader Question - 68rs327 12:32:48 01/21/12
(7)
- 4 cylinder tach drive - Wardner 11:22:06 01/21/12
(7)
- Hitachi Alternator S L plug - neblinc 10:21:22 01/21/12
(2)
- Buying a head?? - Bud DeLong 10:05:39 01/21/12
(4)
- Heads up for 7/8-18 tap source - Tom Fleming 03:19:29 01/21/12
(19)
- SMTA vs. 400/450 gear ratios and ground speeds - CenTex Farmall 21:58:43 01/20/12
(8)
- Farmall Identification - Mark Levitt 20:50:08 01/20/12
(14)
- farmall md fuel systems - jim warehime 18:44:07 01/20/12
(2)
- Char-Lynn Power Steering Problems - ih555 18:00:16 01/20/12
(3)
- Alt ID Web page - John M 15:33:47 01/20/12
(1)
- C 3pt hitch - soundguy 13:58:47 01/20/12
(12)
- H update - soundguy 13:53:14 01/20/12
(17)
- Head gasket - oldiron29 13:14:58 01/20/12
(4)
- IH Therometer - Craig Tenhoff 13:00:15 01/20/12
(4)
- Cylinder head - Rod in MN 11:51:00 01/20/12
(1)
- farmall c engine replacement - BOWTIEIH 10:54:50 01/20/12
(4)
- 1936 F-20 head - farmallman2013 09:47:18 01/20/12
(7)
- Need help identifing parts - Dave S. 08:22:35 01/20/12
(6)
- Case IH web site - j hakenwerth 05:45:09 01/20/12
(9)
- M axle clamp update - jdrlondon 03:39:29 01/20/12
(2)
- 460 D - metalmender 01:42:11 01/20/12
(13)
- remember the guy?? - dave2 00:56:19 01/20/12
(7)
- 560 gas 12v positive or negative? - redgems 21:48:53 01/19/12
(3)
- 1456 demo question - farmall400lp 20:27:50 01/19/12
(6)
- 25V mower parts diagram ? - JCarroll 20:21:49 01/19/12
(0)
- Farmall M wide front - Bill Krosnicki 18:11:48 01/19/12
(6)
- farmall f20 - blayne b 15:11:52 01/19/12
(7)
- F-30 Zenith k5 carb - TIMAR 14:19:54 01/19/12
(3)
- What is this head off of? - tmiller 13:48:58 01/19/12
(5)
- 10-20 head studs - oldiron29 13:41:52 01/19/12
(8)
- No.8 plow weed hook - davset 13:34:46 01/19/12
(9)
- farmall b seat support - tom loveless 12:27:19 01/19/12
(8)
- late 4 cylinder gas question - Rex Simpkins 12:05:40 01/19/12
(5)
- IH 806 steering to left - Suz 11:11:16 01/19/12
(3)
- 1949 Farmall Cub "Blue Ribbon Reconditioned" - DC Snider 10:26:39 01/19/12
(9)
- gas leaking at drain cock farmall md - jim warehime 09:34:01 01/19/12
(3)
- contact info for seat pans - jim warehime 09:29:10 01/19/12
(7)
- super m stuck in gear - tpoplett 07:11:11 01/19/12
(6)
- Farmall Seat Springs - Tobaccoman 06:38:36 01/19/12
(2)
- 560 ta - Phil in NW Mo. 06:37:33 01/19/12
(6)
- Mike1972chevy, clutch housing answer - D Slater 06:07:47 01/19/12
(0)
- Seat recovering and brake bands on an M - schultz 05:12:21 01/19/12
(12)
- McCormick Deering P12 power unit - Nebraska Kirk 20:42:08 01/18/12
(8)
- I think this is a farmall air cleaner ? - jdcornborex2 20:40:04 01/18/12
(3)
- Driver offset - ShadetreeRet 20:29:28 01/18/12
(14)
- Farmall Super C coolant problem - Jim Gilmore 19:15:14 01/18/12
(6)
- hydro 70 - SD Farmall guy 18:59:51 01/18/12
(4)
- Will it fit update - Jim Iowa 18:19:51 01/18/12
(2)
- Wired bolts - Jim Paterson 17:21:24 01/18/12
(13)
- 300 utility hyd trouble ,parts??? - Jim in Michigan 17:04:49 01/18/12
(2)
- F 10 Governor Boot - super99 17:03:02 01/18/12
(4)
- Super M seats,Which one is correct????? - Mike1972chev 16:06:28 01/18/12
(21)
- farmall m in tow - 460anger 16:04:29 01/18/12
(12)
- belley pump houseing - dcpky 15:04:52 01/18/12
(4)
- 10-20 Push Rods - F-Dean 13:56:09 01/18/12
(5)
- IH 424 steering - mike tn 11:08:05 01/18/12
(1)
- Help needed - WD FFA Farmall H 10:45:03 01/18/12
(5)
- O/T trailer question - FC Andy 10:00:58 01/18/12
(21)
- changing Disc blades - brokengun 09:38:16 01/18/12
(4)
- Hydraulic lift box on Super A Farmall - lewis cason 09:36:14 01/18/12
(3)
- need napa # for 12v A circuit Vreg - soundguy 09:02:32 01/18/12
(3)
- H headlight grounding - Zachary Hoyt 08:50:20 01/18/12
(9)
- C-153 Governor adjustment - Mike Lumley 07:15:54 01/18/12
(2)
- Might as well introduce myself '51 Farmall M - DC Snider 06:42:03 01/18/12
(29)
- Test - James Williams 06:27:16 01/18/12
(3)
- Re: Test - JRSutton 12:40:19 01/18/12
(2)
- Re: Test - James Williams 06:28:27 01/19/12
(1)
- Re: Test - JRSutton 07:01:32 01/19/12
(0)
- 454 STARTER REVISITED - PRTZMAN55 06:20:33 01/18/12
(6)
- Radiator difference - TimWafer 05:22:41 01/18/12
(2)
- Will it fit - Jim Iowa 20:52:09 01/17/12
(4)
- Super H, stage II - Jason Rasmussen 19:02:17 01/17/12
(6)
- 2514B BACKHOE - BOB ONEILL 18:42:23 01/17/12
(1)
- hydraulic lift for Farmall F-12 - matthew chapman 18:04:27 01/17/12
(1)
- h cranking parts - j hakenwerth 16:41:41 01/17/12
(4)
- IH 424 parts - mike tn 16:25:20 01/17/12
(5)
- 1941 H Farmall Brake Repair Question. - Vinnie L. 13:34:46 01/17/12
(5)
- Super A Carb troubles - Goodman 11:35:00 01/17/12
(6)
- Front and rear wheel/hub differences HM OLDER NEWER??? - Mike1972chev 10:23:27 01/17/12
(14)
- Felt Strip for WD9 - WD9ER 10:13:42 01/17/12
(1)
- Anyone ever replaced starter solenoid on ih 454 gas - PRTZMAN55 09:25:07 01/17/12
(2)
- M carburetor - Hoosierhog 09:06:39 01/17/12
(3)
- Paint on the exhaust side of 86 series tractor - Farmboycitygirl22 09:06:22 01/17/12
(4)
- some quick work on the H - soundguy 06:51:23 01/17/12
(17)
- Re: 54 Super H serial number - mkirsch 05:45:33 01/17/12
(0)
- Donaldson precleaner and oil bath filter - Tuckermac 05:39:47 01/17/12
(3)
- 300/350 rear wheel weights - Bill46 05:18:43 01/17/12
(5)
- The McCormick Plough I Never Got - Good Pictures Though! - SadFarmall 03:02:25 01/17/12
(6)
- What to look for, to buy 53 SM - jdntn 20:18:06 01/16/12
(10)
- governor surge on O-6 - Bob in Mi. 19:57:49 01/16/12
(3)
- photo add archives - WOpp 19:22:25 01/16/12
(4)
- IH M or H type weight wheel weight bolts - Jay563 19:05:26 01/16/12
(8)
- 450 tach - chester5731 18:52:26 01/16/12
(3)
- 240 engine argument - Jason Finchum 18:35:07 01/16/12
(4)
- Covert H to an Alternator - Novice with Case 18:17:09 01/16/12
(17)
- 44 H, hyd lever position ? - soundguy 18:05:40 01/16/12
(5)
- 650 Lights - plow hand 18:00:06 01/16/12
(1)
- Farmall A needs a lift - Machine249 17:37:57 01/16/12
(4)
- 450 Pistons - GaryinKs 17:31:32 01/16/12
(3)
- 504 Radiator - Joey K 17:31:01 01/16/12
(3)
- 460 diesel engine - jd plowboy 17:06:41 01/16/12
(2)
- Farmall Super H/Super M hydraulic reserviors the same? - Jerry Bantz 15:38:01 01/16/12
(1)
- M power steering - musky11 15:15:36 01/16/12
(3)
- power red paint number - loren in wi 15:10:01 01/16/12
(3)
- what is this? - David E 13:27:02 01/16/12
(5)
- Touch control - J.D.HEICHEL 13:15:32 01/16/12
(7)
- What kind of Cub seat is it? - goatboy 12:52:48 01/16/12
(3)
- 460 D sleeve - tntleake 12:09:19 01/16/12
(5)
- Summer fun - kevsdodge 10:44:23 01/16/12
(2)
- Farmall h rear end fluid weight? - Ray.haapala24 09:38:08 01/16/12
(2)
- 506 loader - pheel 06:49:08 01/16/12
(3)
- 506 loader - pheel 06:47:10 01/16/12
(0)
- A transmission seal - cheif 06:36:34 01/16/12
(2)
- Torque Amplifier - 400LP 05:43:00 01/16/12
(11)
- Mccormick-Deering W-12 - Bill Krosnicki 21:15:18 01/15/12
(5)
- IH Refridgerator - What's it worth?? - rtr 20:32:06 01/15/12
(16)
- Farmall Regular on ebay - farmallholic 20:18:28 01/15/12
(3)
- Super C overhaul - Rick Remmert 19:50:26 01/15/12
(10)
- Ihc B cultivator - Al toepper 19:49:46 01/15/12
(3)
- Power Steering noise 706 LP - W6tractor 18:16:47 01/15/12
(0)
- Clutch Part - Super-H-Mike 17:32:44 01/15/12
(7)
- IH 966 - KyFarmCat 16:51:33 01/15/12
(6)
- international 1150 feed mill - JMP 16:41:11 01/15/12
(1)
- Super MD Water Trap - Dalrymple 16:09:21 01/15/12
(8)
- 706 oil filter - flick706 15:32:22 01/15/12
(1)
- Thanks to all Transmission seal one more ? - dcpky 12:22:35 01/15/12
(1)
- Farmall 450 Gas Tachometer plastic gear - Tony_Idaho 11:57:32 01/15/12
(16)
- Engine Bearings - Jim Paterson 11:25:51 01/15/12
(5)
- wiring diagram for 1945 M - LouieCanova 11:20:39 01/15/12
(1)
- How to replace the needle bearings in the rear end of an M - Stormwarning 10:47:10 01/15/12
(3)
- IH C-200 2 disc plow - 53Farmall 09:54:25 01/15/12
(3)
- transmission seal - dcpky 09:52:36 01/15/12
(7)
- h charging help - pete_5959 09:27:03 01/15/12
(1)
- IH 464 Coil voltage? - hayray 08:00:15 01/15/12
(6)
- high drum M production numbers - loren in wi 07:59:29 01/15/12
(2)
- 856 deck plate - Dan(wi) 06:52:49 01/15/12
(0)
- Hiniker cab #1300 - Dan(wi) 06:49:34 01/15/12
(1)
- IH 240? - mike paulson 04:18:50 01/15/12
(6)
- H year / model differences - soundguy 21:32:24 01/14/12
(15)
- Update on Super M Blow out - Fullers Farmalls 21:12:10 01/14/12
(3)
- IH C with oil in the radiator - Dewayne W 20:49:29 01/14/12
(1)
- Farmall H Serial # Question ( PLEASE HELP ) - mjd3 19:38:29 01/14/12
(3)
- 1086 electrical question - Intl385 19:21:25 01/14/12
(6)
- New home for 600's - WOpp 19:14:11 01/14/12
(8)
- MV-404 engine in '79 S Series - stevee 19:08:15 01/14/12
(2)
- 300 exhaust manifold - lkauf 19:00:00 01/14/12
(1)
- wide front - David Mohr 17:33:01 01/14/12
(4)
- IH part # - specs on part ? - LJD 17:20:57 01/14/12
(1)
- gotta wait till next week to go look at the H - soundguy 15:58:17 01/14/12
(4)
- MD switchover linkage - jfrankhash 15:08:41 01/14/12
(2)
- 856 Engine Parts Diagram - cbergan 14:59:15 01/14/12
(3)
- Farmall H Sleeve - JCR-Michigan 14:56:34 01/14/12
(8)
- How if the bearing splitter used on the front pulley? - sflem849 14:00:49 01/14/12
(10)
- need a wiring diagram of a 766 please - kennell 13:48:14 01/14/12
(2)
- Super M Charging Question - WI-Ed 10:57:59 01/14/12
(4)
- B414 glow plugs - Ed Nelson 08:01:18 01/14/12
(3)
- missing serial numer tag - IBorange in TX 08:00:21 01/14/12
(3)
- M-No fire to Plugs - LouieCanova 07:35:11 01/14/12
(10)
- Farmall C charging question - Dave BN 05:43:02 01/14/12
(10)
- Mystery noise in SM solved - BEL@IN 05:30:49 01/14/12
(2)
- O.T. Kewannee cultimulcher decal! - John826diesel 05:29:17 01/14/12
(2)
- McCromick W6 is a mess - LarryM 22:12:36 01/13/12
(18)
- tntleake - DeltaRed 20:05:48 01/13/12
(1)
- Behlen PS leak repair - Dan MD 19:15:10 01/13/12
(3)
- Looking for a 350, 400, 450, 460 etc in NB, NS, PE, and ME - shawnm 18:25:06 01/13/12
(14)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - realolman 05:29:30 01/15/12
(1)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - shawnm 17:45:34 01/14/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - Robert Lorencz 16:43:33 01/14/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - tractorsam 07:50:44 01/14/12
(1)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - Ivan Grant 06:16:13 01/14/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - Jason(ma) 05:49:40 01/14/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - Mike1972chev 01:45:13 01/14/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - rustred 21:27:49 01/13/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - shawnm 18:55:32 01/13/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - mkirsch 18:44:16 01/13/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - Janicholson 18:33:07 01/13/12
(0)
- Re: Looking for a 350, 400, 450, 460 etc in NB, NS, PE, a... - oldiron29 18:27:34 01/13/12
(0)
- international feed mill model 1150 - JMP 18:08:50 01/13/12
(4)
- Super C Transmission overhaul - B Becker 14:50:12 01/13/12
(2)
- Hitachi Alternator Pulley? - neblinc 14:42:22 01/13/12
(12)
- 656 PTO - ONT 656 14:17:27 01/13/12
(5)
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We've kept the same low rate for six years. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Tractor Manuals
| Tractor Parts
| Forums
Copyright © 1997-2012 Yesterday's Tractor Co. - A Washington State Corporation
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you use antique tractors, collect antique tractors, or just enjoy looking at antique tractors, welcome to our site! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 antique tractor forums, show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
