Extra hydraulics on Late A or B

Pete76NY · May 6, 2011

Finally chased down an A B G snow plow, gonna need alot of welding, but the price was right ($30). Question is, since I am welding, it would be kinda easy to modify a lil bit and weld some ears on for an angling cylinder...is there a realtively easy and cost effective way to configure the tractor so that in conjunction with my live hydraulic pump I could use angle and lift at the same time? Or at least w/o getting off and rehooking hoses, or manually angling? TY Pete

DaveH IA · May 6, 2011

Baker made a valve that adds another valve ahead of the power trol valve --with a live pump you have to do some changing on the plumbing---I have on set up on my 52 A

old · May 6, 2011

I know in this case it probably does not matter but it is always nice to say what brand tractor you have. A, , G could be JD or Allis and if you had npt included the G I would have also said Farmall. Any how if you have an external hyd pump run off a belt or crank shaft then it is pretty much just adding more valves. Some of the better ones let you use more then one control at the same time and divide the flow to more then one place at the same time

Leroy · May 6, 2011

ABG is a model number the same as WD45 is a model number for an AC tractor or 37 is a model number for a IHC disk or 14T is for a Deere baler, It is a model number, not to be confused with the model tractor as those front blades could have probably been mounted to any IHC with the frame rails and narrow front and hydrolick, AC the same, Oliver the same, Cockshutt the same

Extra hydraulics on Late A or B

Pete76NY

Well-known Member

DaveH IA

Member

old

Well-known Member

Leroy

Well-known Member

Similar threads