O.T. 06 Dodge cummins

usetob · May 2, 2011

Does anyone know the fuel pressure from the pump in the tank that goes to the injection pump?
Thanks in advance!

ted regentin · May 2, 2011

I'm at home so I don't have the info in front of me, but if I remember correctly, they are more interested in volume spec rather than pressure. I will look it up when I get to the shop this morning.

MSD · May 2, 2011

My 02 runs 15 psi. at idle and anywhere from 11 to 15 when driving depending on the load and throttle used. Don't know if it is the same in the 06's though.

colekicker · May 2, 2011

That truck would be a common rail engine. No injection pump. You have a high pressure pump that feeds the common rail at over 20,000 psi.
Not sure if the pump is in the tank, but if so, it would be at 6-10 psi probably.

Anonymous-0 · May 3, 2011

that has a cp3 injection pump. line pressure to the pump should be 12-15lbs of pressure. if not your transfer pump is bad.

O.T. 06 Dodge cummins

usetob

Member

ted regentin

Member

MSD

Well-known Member

colekicker

Member

Anonymous-0

Well-known Member

Similar threads