1486 need help bad

rtg · Apr 25, 2011

i split the tractor a few weeks back to put 1st. and 2nd. gear in did not bother the ta cause it worked fine drove it out of the shop went through 1,2,3,4 in low range drove about 70' pushed in on the clutch to go to high range and then the tractor quit pulling in high or low range. power steering works, brakes work , lift arms work,pto works, ive checked o rings in multi control valve.i'm lost any help would be greatful. thanks

Jon Hagen · Apr 25, 2011

Possible that your clutch disc hub broke loose from the disc, causing the no drive. Fairly common with the spring hub clutch disc. The PTO and hyd pumps drive from the outer shaft and splines in the clutch cover, while the clutch disc drives the center shaft and transmission.

1486 need help bad

rtg

New User

Jon Hagen

Well-known Member

Similar threads