What's it's called

Anonymous-0 · Apr 11, 2011

I need a universal with a smaller PTO spline like the TO 20 on one end, and a 1 1/8 id. smooth bore on the other end to fit my shaft. It's for the gear box shaft to the drive pulley on my flail mower. Is a off the shelf item, or it will be special made? If I knew the proper name for the ends I can do a search on the computor. Thanks for any help. stan

Russ from MN · Apr 11, 2011

Agri-supply has a lot of components, you could search on their site or just call them, they have some very knowledgeable people.

paul · Apr 11, 2011

My wife says I can't respond like I first thought, or I'd get banned from the site.....

So you're looking for a pto shaft.

1-1/8" 540 female knuckle on a universal joint, a sliding shaft, a universal joint with a 1-1/8 inch smooth knuckle on that end. No keyway, I'd presume a bolt hole?

--->Paul

Old Roy · Apr 11, 2011

I Googled "smooth bore to spline universals"
came up with some pics , but not your size

BCnT · Apr 11, 2011

why not use an adapter on the obsolete 1&1/8" pto stub and bring your Fergie into the future...1&3/8" driveline parts are easier to find when needed...the mower end should be off the shelf.
the adapter pic below is available on this site for under 20 bux

Anonymous-0 · Apr 11, 2011

If that seal in your pto shaft leaks and needs replacing then is the time to instal the larger shaft, should be able to buy them in a package with the bearing and seal mounted, all that is required is to remove one and insert the other, In the meantime" BCnT" has the other solution.

Anonymous-0 · Apr 12, 2011

Ignore that, I was standing on my head.However people with the TEA20 could upgrade in that way.

Wilson · Apr 12, 2011

baum iron omaha neb

Crem · Apr 12, 2011

Is it something like one of these?

rex beavers · Apr 12, 2011

check with tractor supply they mite have one

Anonymous-0 · Apr 12, 2011

That is what I need, but with a 1 1/8 round shaft on the other end. Thanks Stan

Blackhole49 · Apr 12, 2011

The one I have on my 6' Landpride finish mower is like that. The mower end is secured with a shear bolt. It came from tractor supply several years ago.

What's it's called

Anonymous-0

Well-known Member

Russ from MN

Well-known Member

paul

Well-known Member

Old Roy

Well-known Member

BCnT

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Wilson

Well-known Member

Crem

Member

rex beavers

Member

Anonymous-0

Well-known Member

Blackhole49

Well-known Member

Similar threads