464 IH hydraulics

Anonymous-0 · Apr 1, 2011

Would like to put a loader on my 464. Can I use the internal pump successfully. Where do I tap in? It has remote hook up .

in-too-deep · Apr 1, 2011

You should be able to get a "Power Beyond" plate from Case IH. It goes on the end of the remote valve stack and gives you pressure all the time. Return from the loader just dumps back into the trans case. Sorry I can't be much help, this is just what I did on a 584.

geok · Apr 1, 2011

I had a 2400 that I put a loader on. I tapped in to the tractors system under the left floor board. I connected my loader valve to the main port that fed the 3 point then on my return line from the loader valve to the line that fed the 3 point. That was in the late 1970s. The tractor and loader is still a going.

464 IH hydraulics

Anonymous-0

Well-known Member

in-too-deep

Well-known Member

geok

Member

Similar threads