JD 750 adj bottow plow

Anonymous-0 · Feb 20, 2011

Just geting started in farming. How do I adj the bottom plow, every time I set the plow down and start off it moves to the left and then starts to pull down and sort of straightens out, Is this normal or do I need to adj, the chains on the 3-point hitch. Also how do you keep it at one depth and not have to keep adj, up and down. Thanks in advance. Mike

flying belgian · Feb 20, 2011

I'm sorry, I never heard of a JD 750 plow.

Dave Sherburne NY · Feb 21, 2011

check this
It will give you a good starting point. Search the archives on the Ford 9n 2n 8n board there is a pretty good set of instructions on there.If you have a 14" plow the inside of the right rear wheel to the center line of the tractor should be 25 1/2" a 16" plow should be 27 1/2". Do not move the drawbar on the plow left or right, there are at least three different ways to set the angle of attack It depends on your plow.
You need to tell us what the plow is, a picture would be best. I assume the the tractor is a JD 750
setting up a plow

JD 750 adj bottow plow

Anonymous-0

Well-known Member

flying belgian

Well-known Member

Dave Sherburne NY

Well-known Member

Similar threads