JD 148/158 on 4430 Loader question

How did the original stands for these loaders work? Does anybody have pics of the original stands? Or anybody made their own? Please help. Thanks

http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt


PARKING STAND
Cart KEY PART NO. PART NAME QTY SERIAL NO. 148 158 168 REMARKS
1 14H826 NUT 4 X X X 1/2"
2 12H301 LOCK WASHER 4 X X X 1/2"
3 W22548 CLAMP 2 X
W22546 CLAMP 2 X X
4 W22688 GUIDE 2 X (SUB FOR AW16601)
W22690 GUIDE 1 X X R.H. (SUB FOR AW16602)
W22691 GUIDE 1 X X L.H. (SUB FOR AW16603)
5 14H1039 NUT 4 X X X 5/8"
6 12H294 LOCK WASHER 4 X X X 5/8"
7 03H1856 BOLT 4 X X X 5/8" X 2-1/4"
Cart KEY PART NO. PART NAME QTY SERIAL NO. 148 158 168 REMARKS
8 B15648 QUICK LOCK PIN 4 X X X (SUB FOR AW13418)
9 AW16459 BRACKET 2 X X X
10 H757DA PIN FASTENER 2 X X X
11 28316 SPRING LOCKING PIN 1 X X X
12 W22456 PIN FASTENER 1 X X X
13 24H1392 WASHER 3 X X X 25/32" X 1-3/8" X 0.120"
14 28H382 BUSHING 1 X X X
15 AW16543 SUPPORT 1 X L.H.
AW16541 SUPPORT 1 X X L.H.
16 19H1721 CAP SCREW 4 X X X 1/2" X 1-1/2"
Cart KEY PART NO. PART NAME QTY SERIAL NO. 148 158 168 REMARKS
17 AW16685 STAND 1 X
AW16684 STAND 1 X
AW21123 STAND 1 X
18 AW16542 SUPPORT 1 X R.H.
AW16540 SUPPORT 1 X X R.H.
19 AW16462 ARM 1 X
AW16458 STRAP 1 X
AW21122 ARM 1 X
20 34H280 SPRING PIN 1 X X X 3/16" X 7/8"
21 19H3329 CAP SCREW 1 X X X 3/8" X 5-3/4"
Cart KEY PART NO. PART NAME QTY SERIAL NO. 148 158 168 REMARKS
22 W22914 STRAP 1 X X X
23 12H304 LOCK WASHER 1 X X X 3/8"
24 14H1076 NUT 1 X X X 3/8"
25 34H386 SPRING PIN 2 X X X 1/4" X 2"

buickanddeere,
You included the stand part # for 168 which might confuse him more than he already is.

148 158 168
AW16685 STAND 1 X
AW16684 STAND 1 X
AW21123 STAND 1 X

(quoted from post at 21:02:10 01/20/11) How did the original stands for these loaders work? Thanks

Click to expand...

A u-shaped bracket when in stored position is attached to the rod end of the boom cylinder housing and held up in the frt with pins. This u-shaped bracket goes around frt of tractor. When one chooses to remove loader pull frt pins and lay u-shaped bracket on frt axle. Hook up a bar on LH side that raises loader mast over frt axle while backing tractor out of loader. When bracket reaches ground in frt of axle so it can support loader detach hyd hoses. Forgot to mention to remove 4 attaching bolts on each side before removal.