erickson skid loader parts

jimvw · Dec 26, 2010

Need an axle shaft for my Erickson 25 hp skid loader. This one is a model 25-44 or known as the little Eric. This is also the same as a Ford CL20. New axle is not avaliable. If you know of one of these sitting around or wrecked out let me know. Thanks

Welding man · Dec 26, 2010

Contact G D equipment in Shippenburg PA 717 530 0170. They have always been able to help me with any skidsteer parts.

IaGary · Dec 26, 2010

Any good Machine shop should be able to turn one out for you.

Don"t know what it will cost, but as long as you have the old one for a pattern it should be possible.

Duner Wi · Dec 26, 2010

Web search provided this.
http://www.hermanmfg.com/axles.htm

Go down to crawler dozer skid loader and do a search for Erickson. Axles have been discussed there.

Blackhole49 · Dec 26, 2010

When my ford broke, I also couldn"t find a replacement. Mine was broke right at the hub. My brothers shop was able to drill the hub and tap the shaft, re assemble and weld. that was 4 years ago. I will admit that I have been real careful about spinning the tires and turning on pavement. I also only put about 50 hours a year on it. Good luck.

Blackhole49 · Dec 26, 2010

Should have included "install a bolt in the shaft.

oldironman · Dec 26, 2010

Then Ford wonders why there business is going down hill. There prices are way to high too.

erickson skid loader parts

jimvw

Member

Welding man

Well-known Member

IaGary

Well-known Member

Duner Wi

Well-known Member

Blackhole49

Well-known Member

Blackhole49

Well-known Member

oldironman

Member

Similar threads