JD D Crank Shaft Question

Phil Kilcollins · Dec 19, 2010

I have no oil getting to the no. 2 crank shaft connecting rod journal. Anyone with any ideas?

El Toro · Dec 19, 2010

I would place this request over the JD forum as you will get more responses. Hal

Bob · Dec 19, 2010

Is the RH MAIN bearing getting oil?

If the RH MAIN is getting oil and not totally trashed the only thing between there and the rod bearing is the drill oil gallery in the crankshaft.

Bob · Dec 19, 2010

Is the RH MAIN bearing getting oil?

If the RH MAIN is getting oil and not totally trashed the only thing between there and the rod bearing is the drill oil gallery in the crankshaft.

Bob · Dec 19, 2010

Sorry for the double post,plus "drill" should read "drilled".

El Toro · Dec 20, 2010

Back in the 1960's one of my co-worker's brother bought a new Ford pickup and he didn't have it very when a rod was making a noise. He took it back to the dealer and they replaced the inserts and he didn't drive it very long and it started knocking again and he went back to the dealer again and they replaced the inserts again.

He didn't drive it very long and it started knocking again. My co-worker and I dropped the pan and found the same rod bearings loose. We connected a pressure vessel to the oil gallery we used at work and found the crankshaft wasn't drilled to feed oil to that rod. When the owner called the dealer and told them what the problem was they said we're sending a tow truck out to pick up the vehicle. A new crank fixed the problem. Hal

JD D Crank Shaft Question

Phil Kilcollins

New User

El Toro

Well-known Member

Bob

Well-known Member

Bob

Well-known Member

Bob

Well-known Member

El Toro

Well-known Member

Similar threads