Int. 1086 Speedometer

Anonymous-0 · Dec 9, 2010

I have an Int. Har. 1086 with the digital readout with the touch pad. In the past month the speedometer has stopped working, it shows 0.0. Everything else works (RPM, PTO, etc.), so I think it may just be a sensor. But... where is the sensor located? Is there anything else that might give these problems for the speedometer not to work.

pete 23 · Dec 9, 2010

Sensor is located under floor board under seat, it reads off the differential ring gear. Could be a wire or the connection and the shift likages may have rubbed on it. I would also check to see if you can check the calibration number, your operators manual should show how to do that. (unless it is in the serice manual, can't remember for sure, would have to look).

Int. 1086 Speedometer

Anonymous-0

Well-known Member

pete 23

Well-known Member

Similar threads