replacing seals on rear axle

I pulled the rear axles on my W6 today so I could replace the outer seals. I need to remove the outer bearing to get to them but there isn't enough room for any type of puller. Not sure what I'm going to do but I'll look at it with a freash pair of eyes tomorrow.
Charles
 
I have no idea about your tractor but on my allis chalmers 190xtd you need to go inside the rear housing and push on the axle from the inside to get it out.
 
Yep, this one too!. I just need to figure out how to drive the outer assembly off to replace the seals. There all attached to the axle. There is a sleeve on the outside of the bearing retainer that needs to come off and I"d hate to ruin it all with a torch. But I see no other way at the moment.
Charles
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top