Scatrack Operators Manual- Model 1700C

JohanP · Aug 3, 2010

I have lost my operators manual on my Scatrack Model 1700C. It is a small booklet which shows how to use all the controls. Is there anybody out there who can give me some dealer information where I can get a hold of a manual like that. It also came with a binder on the engine and all the electrical diagrams, and all the hydraulic diagrams. I believe they were manufactured from 1992- 2000 by Track International Company out of the States. They were made in Whales England.

CumminsMan · Aug 3, 2010

ScatTrak was sold to Volvo's Construction division. Might look on their website for dealer info/dealer search. We have a model 1750D and have had to get a couple things through Volvo, wasn't a big deal. Ours is a 2001 model and was built in Wisconsin.

Anonymous-0 · Aug 3, 2010

There are often some Scat Trak manuals on Ebay, but they are the parts and repair manuals. I have an 1800C, not sure where I put the manual, though.. I need to find mine.
Scat Trak loaders are good ones, I have been pleased with mine.

JohanP · Aug 4, 2010

As far as we understand through our dealer, Scat Traks were made in Whales, England. Mine has a Detroit Perkings engine. It's 80 horsepower, and has a lifting capacity of 1750 pounds. I needed a new hydaulic drive motor that needed to be replaced, and I found the last one in Minnesota. Now they don't make any more hydaulic drive motors. We were told they were imported from England, through Track International in the States. How is that yours is made in Wisconsin? Are you still able to get all the parts? I bought mine, and was told they are very good machines. I have bought it with only 1400 hours on it, and I seem to have a lot of little problems. My loader doesn't want to go down, it only wants to go up. And the bucket doesn't want to close. It just happened. I know it is somewhere in the hydraulics, either a valve or something. Thank you for your reply.

JohanP · Aug 4, 2010

As far as we understand through our dealer, Scat Traks were made in Whales, England. Mine has a Detroit Perkings engine. It's 80 horsepower, and has a lifting capacity of 1750 pounds. I needed a new hydaulic drive motor that needed to be replaced, and I found the last one in Minnesota. Now they don't make any more hydaulic drive motors. We were told they were imported from England, through Track International in the States. How is that yours is made in Wisconsin? Are you still able to get all the parts? I bought mine, and was told they are very good machines. I have bought it with only 1400 hours on it, and I seem to have a lot of little problems. My loader doesn't want to go down, it only wants to go up. And the bucket doesn't want to close. It just happened. I know it is somewhere in the hydraulics, either a valve or something. Thank you for your reply.

Scatrack Operators Manual- Model 1700C

JohanP

New User

CumminsMan

Member

Anonymous-0

Well-known Member

JohanP

New User

JohanP

New User

Similar threads