Forgive the double post, I posed this question on the Ford forum, but I thought someone here may know also. I know this tractor isnt exactly "antique", but maybe someone can help me. Mine came from the factory with no remotes. I just need one to opereate one double-acting cylinder. Been shopping around for new and used valves that mount to the top cover and been receiving some sticker shock. There seems to be a good sized port thats plugged in the factory block off plate. Could I not just simply plumb this to a much cheaper single spool valve mounted to the fender? If so, where would the best place to return fluid to? Any help would be appreciated.
- Thread starter JBMac
- Start date
Little more to it than that. You have to have a valve that has a power beyond function. As that block sits there it alows fluid to go on back to power the rear 3 point lift..You could find an adapter to get off the tractor there that will let you plum the valve up on the fender but will still have to dump the third line.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy