The metal hyd line runs from the steering to the pump loosened up and blew apart today. I put it all back together and added fluid but I still isnt normal. Its making a whine grind noise at certain rpm's. I think it has air in it because the hydraulics are kinda shaky now. Any ideas of what to do and how to remove the air if thats the problem
- Thread starter brandonh
- Start date
to be more specific the noise is coming from under my feet at the base of the steerin wheel. Possible the steering valve. Just need to know how to remove the air. Im thinking i need to bleed the line but need help on how to do it. I loosed one end while it was running and let some fluid out. Seemed to help some.
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
There's no air bled on steering valve on a 2755 that I remember. To get air out one has to cycle the oil back to sump. You can speed this up by putting a jumper hose in scv(remote outlet plug-ins) and move control handle to flow the oil. Be careful as this will tend to heat hyd oil if done for an extended period of time. Also turning frt wheels back & forth will help.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy