engine block Case VAC-14

That should be the same block as used in the VAC and if so I have one that needs sleeves etc in it but the block is good. E-mail is open so we can talk about it. The biggest problem might be shipping depending on where you are. I'm in Missouri
 
Should be casting # VT 328A. All VA series tractors from late 1947 up used this block. If NC is close send me an email. Lee
 
E-mail me an we can talk about it. I do not talk $$ on the site. So just drop me an e-mail and we can talk and shoot from there I'd give you my phone number so we can talk better
 
There are 2 easy ways for you to send me an e-mail. One is click on send mail in the bottom right hand side of this box or click on my name up at the top both will take you to a e-mail page
 
Don't know where you are located but I travel to Virginia about 6 times a year. If you are on the east side maybe we could deal!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top