POWER TAKE OFF CLUCH {old}

JR.Frye · May 9, 2010

HEY OLD
In a post you and I talking about a power take
off cluch for my wd45 when I use my bush hog.
Did or Did you Not say the power take off cluch
should be a slip cluch. So I would not tair out
power take off, and all so I have been told that
I can buy a thing call'd a cylender lock is that right. YOUR THOUGHTS:
JR.FRYE

Bspauld · May 9, 2010

I wouldnt slip it very much,They are costly to repair and a lot fo work,

Wilson · May 9, 2010

wd 45 has pto shear pin use grade 2 bolt on ritaty mower or even softer pin to save pto gears Pin is under tractor where pto gear box joins shaft to rear

old · May 9, 2010

You need to have an ORC (over running clutch)) So when you push down the foot pedal clutch it will not push you another 10-15 feet and get you in trouble. Ya if you use the hand clutch that will be ok but I know how it gets when you get in a tight place you forget about the hand clutch and push the foot one down and then the brush hog pushes you into that ditch or tree or fence etc.

JR.Frye · May 9, 2010

THANK YOU SIR:
HOW HAS EVERY BEEN?
JR.FRYE

old · May 9, 2010

Would be doing ok if the but heads on here would stop giving me such a hard time but guess I could also hope to win the lottery also LOL. Just had some one else that only knows me from what I say here give me $hit today

POWER TAKE OFF CLUCH {old}

JR.Frye

Member

Bspauld

Member

Wilson

Well-known Member

old

Well-known Member

JR.Frye

Member

old

Well-known Member

Similar threads