Front crank seal needed J.D. 2010

Fordman6442 · May 4, 2010

I need a front crank seal for my 2010 145 Cu. In. gas engine. There is a # on it but our bearing house can't cross it over. Is there a Jobber # or must I go to J.D. for it?
Thanks, Don from Canada

robersw · May 4, 2010

Just changed this seal on my 2010 about 3 weeks ago.
It is John Deere AT344T and I paid about $19 for it. You will also need the gasket, T510T, that goes behind the front plate that holds the seal. It was under $4.

Good Luck
Scott

Bob · May 4, 2010

Will the dimensions help?

Deere Part Number: AT344T

Shaft Diameter 1.500 IN
Seal Outside Diameter 2.379 IN
Width 0.407 IN
Spring Type GARTER
Material NITRIL

Heck, I can make it even EASIER for you... the SKF (formerly C/R) on-line catalog has a "cross" for it:

<img src = "http://i167.photobucket.com/albums/u125/27Grainfield/DEERE2010FrontSeal.jpg">

Front crank seal needed J.D. 2010

Fordman6442

Member

robersw

Member

Bob

Well-known Member

Similar threads