Hard Shifting

Rich -Youngstown,NY · Apr 6, 2010

Have 600 ford with front loader,grinds when changing gears in higher rpm's. Throttle down shifts easier with less grind. Approximately 50hrs on new clutch. Suggestions needed, Thanks

Kevin in OK · Apr 6, 2010

Come to a complete stop before shifting. Your unsynchronized transmission doesn"t like to be shifted like an automobile.

Kevin

Rich-Youngstown,NY · Apr 6, 2010

Kevin Have tried complete stop before shifting, still grinds. Thanks

Zachary Hoyt · Apr 6, 2010

Could your clutch be dragging? Also you have to wait several seconds sometimes before shifting into a gear.
Zach

OldFarmTractor · Apr 6, 2010

How's the oil level in the transmission. Low oil lets the gears spinn more easily.

buickanddeere · Apr 6, 2010

Come to a complete halt before shifting.

Leyland-270 · Apr 6, 2010

Best to come to a complete stop before you go to neutral. Check clutch free play. What is the oil level in trans, and what oil are you using (most of the all in one oils from tsc are too thin) As they say please consult your manual.

Anonymous-0 · Apr 8, 2010

i run into a mechanic the other day who was had for the third time been into the clutch on a ford backhoe,it was doing the same thing, on the forth try and another new clutch disc he found that clutch center was rivited in wrong the flywheel could rub against the clutch center enough to cause the problem

Hard Shifting

Rich -Youngstown,NY

New User

Kevin in OK

Member

Rich-Youngstown,NY

New User

Zachary Hoyt

Well-known Member

OldFarmTractor

Member

buickanddeere

Well-known Member

Leyland-270

Member

Anonymous-0

Well-known Member

Similar threads