Farmall M Update

Brew74 · Mar 23, 2010

Ok so i know i promised to save the M from the scrap yard but i have chosen to not buy the old M Because the guy selling it to me was lying to me the whole time. He has been telling me that he did not know what was wrong with the tractor other than the engine was stuck well in my travels i ran into a fellow that told me exactully what happened to the M because he was in the seat when it happened. It seems that the tractor not only has a stuck engine, but also has a bad transmission because it was sandblasted and there is sand in everything. So i suppose i am still on the look out for another M or Super M, maybe one day i Shall have one.

CLTX · Mar 23, 2010

Might make a good parts maching. Many of the parts probably were not damaged by the sand. That is an example of why a lot of people shy away from sandblasting. Sand will find a way to get inside if any openings are not well covered.

DeltaRed · Mar 23, 2010

where are you?icould use aparts machine.

Brew74 · Mar 23, 2010

I am in Belding Michigan but the tractor is at Noon Equipment In Lowell Michigan. He told me his lowest price was 750 Dollars but who knows maybe he would let it go cheaper??

CLTX · Mar 23, 2010

oops, didn't edit....lol should be ...parts machine.

DeltaRed · Mar 23, 2010

its a little to far away.i'm in sw colorado

Farmall M Update

Brew74

Member

CLTX

Member

DeltaRed

Well-known Member

Brew74

Member

CLTX

Member

DeltaRed

Well-known Member

Similar threads