The fuel line from the sediment bowl assembly to the carburator (MF 135 Deluxe) was hacked up and spliced as well as now obsolete from AGCO/Massey.
I made one out of brake line at napa and had it cut and flared to length. I couldn"t get the end that screwed into the bowl assembly to bolt up so I took the bowl assembly to test fit it off the the tractor.
The hole the fuel line goes into are just a hair too small for it to fit and it won"t work. It fits perfectly at the carburator elbow end. I had a compression fitting and that didn"t seem to help either.
I"m using the 1/4" line you can get from NAPA...I can get my hands on a NOS part from Parts Depot, its just I don"t have the 40 bucks off hand to spend on it. Is there a trick to make what I have work until I get the NOS part?
Christos
I made one out of brake line at napa and had it cut and flared to length. I couldn"t get the end that screwed into the bowl assembly to bolt up so I took the bowl assembly to test fit it off the the tractor.
The hole the fuel line goes into are just a hair too small for it to fit and it won"t work. It fits perfectly at the carburator elbow end. I had a compression fitting and that didn"t seem to help either.
I"m using the 1/4" line you can get from NAPA...I can get my hands on a NOS part from Parts Depot, its just I don"t have the 40 bucks off hand to spend on it. Is there a trick to make what I have work until I get the NOS part?
Christos